Ultraseal PRO automated heat-applied microplate and tube rack sealer by Kbiosystems
.jpg.ashx?maxwidth=140&maxheight=60&bgcolor=white&mode=pad)
Status:
Reviewer
Member since: 2017
Organization: REG Life Sciences
-
- Ease of use
- After sales service
- Value for money
Sometimes great, sometimes awful!
Application Area: Applying gas permeable seals to deep well plates prior to incubation.
"The sealer itself is easy and intuitive to use, the integration with Agilent VWorks and Bravo system is good. However, there is a greater than 20% fail rate which makes this machine near useless as it shuts down the operation and requires operator supervision. Analogous to a toddler."
Review date: 19 May 2017 | Ultraseal PRO automated heat-applied microplate and tube rack sealer
The Ultraseal PRO unit (formerly the Wasp), is an automated heat-applied microplate and tube rack sealer. The unit uses a roll of surface-modified aluminum or plastic film approximately 78mm wide and 610m long, the roll is positioned to the rear of the sealing section via a removable stand, and using a total inline method the film is pulled through the central unit, cut to between 125mm and 130mm in length and then applied to the plate top surface to create the seal between plate and film. Automated heat-applied microplate and tube rack sealer Uses a roll of surface-modified aluminum or plastic film Works with a wide range of plates, tube racks, and custom applications Seals support polystyrene, polypropylene, and CoC & CoP plate formats Both pneumatically and electrically operated Gas Purge option available Automatic eject when timed seal completed Combined temperature and seal time display Compressed air required 6 plates per minute
Product Overview
Ultraseal PRO automated heat-applied microplate and tube rack sealer
Manufacturer Kbiosystems | Available Worldwide
2.3 / 5.0 | 1 reviews
.jpg.ashx?width=100&height=100&bgcolor=white)
