Member since: 2020
Organization: Pondicherry university
Great product for the lab.
Application Area: Centrifugation to precipitate the cells
"Very nice color touchscreen, can set speed in RPM or RCF and store up to 100 programs."
Member since: 2020
Organization: University of Michigan
Simple to use; easy to maintain.
Application Area:Cell culture
"Simple interface to operate, and works efficiently. The ventilation is good to keep samples cool during centrifuging. Maintenance is straightforwards."
NuWind model NU-C300V is a 3-liter capacity ventilated bench top general purpose centrifuge designed to provide a safe and reliable solution to separate liquids based on density in a small footprint.
RCF 13,000 xg
Insight Electronic Control System (ECS)
A color touchscreen uses easily identifiable icons to control system parameters.
Power Factor Control (PFC)
Get the same results time and time again. PFC provides consistent power to the centrifuge compensating for voltage spikes resulting in consistent sample separations.
ClickSpin Rapid Rotor Exchange
Change from one application to another within seconds and/or help create a culture defined by SOP’s to clean your centrifuge with minimal downtime. A twist of the red dial on the centrifuge rotor unlocks the rotor from the shaft with an audible “CLICK” notifying the laboratory technician the rotor is safe to remove. To install a rotor, the end user aligns the rotor with the rotor shaft and with a gentle push down a “CLICK” can be heard notifying the rotor is securely locked into position.
First Air Ventilation System
To cool the chamber, air is drawn into the front of the centrifuge by the vacuum created by the spinning rotor. The air inside the chamber is exhausted out the back of the centrifuge separating the ambient laboratory air temperature from the heated exhausted air. Also, the vacuum pulls air through the motor cavity cooling the motor extending product life.
Swing-out and angled rotors are recognized the by the centrifuge so they cannot go over their intended speed.
Safety operate the centrifuge knowing any imbalance within the centrifuge will cease operation. Imbalance detection is a programmable feature providing the ability to tighten or loosen tolerance settings based on results your expect.
Motorized Auto Lid Lock
An automatic lid locking mechanism takes minimal force to close and creates an airtight seal. The chamber can only be accessed by pushing the lid unlock button when the rotor has ceased moving.
Robust Steel Wall
The exterior of the centrifuge is constructed from a thick piece of steel that is bent to create the walls of the product. The impenetrable wall allows for the chamber bowl to be placed closer to the exterior wall helping to shrink its footpring without sacrificing safety. The robust wall creates an additional line of safety in case of the worst-case scenario.