Products & Reviews

Agilent J&W DB-1 is non-polar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. 

Monitor greenhouse gas emissions with analyzers preconfigured to adhere to regulatory (EPA, EN) standards.

The Agilent LTM (Low Thermal Mass) Series II gives fast results on large numbers of samples, which is critical for laboratories that require fast turnaround time and high sample throughput, such as petrochemical, food testing, and pharmaceutical QC labs.

Purge and Trap (P&T) performs highly sensitive volatile organic compound (VOC) analysis with low carryover, allowing accurate and precise GC and GC/MS determination of VOCs in water, wastewater, soils, and sludges.

OpenLab CDS EZChrom provides superior control of Agilent LC and GC instruments, plus the most complete control of other vendors’ instruments.

Agilent split liners are made to strict dimension specifications for optimal inlet performance and feature the tightest tolerances for od, id, taper and glass wool placement. 

LC Manual Syringes with PTFE-Tipped Plungers

The Agilent Thermal Separation Probe (TSP) provides fast analysis of solid, liquid, and slurry samples. The process is simple, clean, and requires limited or zero sample preparation. Non-vaporized high boiling point ‘dirty sample matrix’– compounds, which can contaminate the GC liner and column, remain inside the micro-vial, and can be discarded after each injection. Use the TSP when testing complex samples in food, forensics,…

The Agilent gas leak detector provides you with an easy way to quickly identify gas leaks in your GC system.

Agilent J&W HP-Chiral ß has a chiral stationary phase based on permethylated beta-cyclodextrin, which has very broad applications for resolving volatile optical isomers. Beta-cyclodextrin is dispersed in a phenyl-based polymer. This polymer provides low bleed and will not interfere with nitrogen-specific detectors such as the nitrogen phosphorus (NPD) detector, allowing optimized sensitivity for chiral compounds containing ni…

The GS-OxyPLOT column provides the ultimate solution for the chemical and petrochemical industries to analyze trace levels of oxygenates in complex matrices such as gaseous hydrocarbons, motor fuels, and crude oil.

- Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences. - Robust and reproducible column chemistry ensures longer column lifetime and consistent results. - 2 minute analysis time increases lab productivity. - Stable to 260 °C Don’t forget: Blood alcohol analysis requires dual column confirmation when using GC/FID.

Accurate boiling point determination for medium and heavy fractions using GC simulated distillation requires columns and phase polymers that are robust enough to withstand high temperatures without significant degradation. Metal columns are a better alternative than fused silica, and the MXT®-1HT SimDist columns are the lowest bleed, highest efficiency columns available, outperforming other metal columns for critical method p…

Don't let a small leak turn into a costly repair—protect your analytical column by using a Restek leak detector. Audible tone indicates the severity of a leak. Redesigned circuitry offers 12 hours of operation between charges. Detects a broad range of gases; Ex rated for use with hydrogen and other explosive gases.

For Shimadzu 17A, 2010, 2014, and 2030 GCs equipped with split/splitless inlets

Rtx-Wax columns are the most inert and efficient PEG columns currently available. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures as high as 250 °C. Selectivity is comparable to other Carbowax columns for compounds of intermediate to high polarity.

Certified reference materials (CRMs) manufactured and QC tested in  ISO-accredited labs  satisfy your ISO requirements.

Extend column lifetime. Excellent inertness—obtain lower detection limits for active compounds. Sharper chromatographic peaks by utilizing retention gap technology. Maximum temperature: 360 °C.

3-IN-1 TECHNOLOGY with Rxi® columns: • Highest Inertness • Lowest Bleed • Exceptional ReproducibilityRxi® columns are more stable at high temperatures than any other manufacturer’s column, resulting in higher system sensitivity. This low-bleed characteristic is the result of superior stabilization achieved by optimizing polymer cross-linking and surface deactivation technologies. Benefits of using ultra-low bleed Rxi® column…

The Mini GC is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. Use room air, helium or nitrogen as carrier gasses. Developed by SeaCoast Science, our advanced MEMS GC chip technology uses an efficient, software-controlled internal pump system, so now you can use room air as a carrier gas. You also have the option of connecting other carrier gases to…

CDS has introduced the first and only high-pressure pyrolysis system. Scientists studying new material, such as various biomass feed stock, need to understand how these materials break down in a reactor at varying conditions. The high-pressure pyrolyzer allows them to study both high temperature & pressure on a small scale in the lab before undergoing the time and expense of scaling up to a pilot reactor. And in addition, the…

Thermally Stable Polar Stationary Phase BPX70 is a phase specifically designed to aid in the analysis of FAMEs no matter how simple or complex the mixture.BPX70 utilizes the phase technology developed by SGE to enhance the performance of what would be, "just another cyanopropyl stationary phase".The incorporation of the aromatic silphenylene group into the siloxane backbone provides many benefits. As the initials BP (Bonded Ph…

The SCION 456-GC provides industry-leading flexibility by supporting 3 injectors and 4 detectors, including the mass spectrometer, providing our users a rapid time-to-benefit advantage.

The Clarus® 680 GC is designed for fast-paced, high-volume laboratories that require fast analytical cycle times. It maximizes throughput with the fastest injection-to-injection time of any conventional gas chromatograph. The Clarus 680 GC incorporates many other PerkinElmer innovations that provide unprecedented operational simplicity and outstanding flexibility while removing the barriers to productivity that can arise with…

If you are involved in the analysis of fragrances, aromas, off-odours and other volatile organic compounds you may well wish that you could target trace componants at the low ppb level. You may also want to work with larger samples, than the 10-20 ml samples that conventional headspace analysis permits. The Entech 7150 Concentrator can be used to trap and focus headspace and air samples up to 1 litre in volume and to inject th…