SilcoSmooth Stainless Steel
Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling.
Rapid separations of permanent gas/light hydrocarbon mixtures.
Excellent compatibility with most GC detectors—minimal bleed, minimal baseline rise.
Preconditioned, less than 30 minutes to stabilize.
Maximum temperature of 280 °C/300 °C.
ShinCarbon ST Columns
Average Rating: 4.8
3 Scientists have reviewed this product
Status:
Reviewer
Member since: 2018
Organization: ErreDue SpA
-
- Ease of use
- After sales service
- Value for money
HC detection!
Rating: 4.3
Application Area: Analysis of natural gas
"Great resolution and low DL! Even at 21°C, with a BID detector in a GC-2010 Plus, I could detect 1.8ppm of methane. While it's a little bit deteriorated now (3yrs of using), it's really helpful for monitoring the concentration of hydrocarbons."
Review date: 02 Dec 2019 | ShinCarbon ST Columns
Status:
Reviewer Member since: 2019
Organization: University of Oxford
-
- Ease of use
- After sales service
- Value for money
Produce great and reliable results
Rating: 5.0
Review date: 17 Apr 2019 | ShinCarbon ST Columns
Application Area:Analyse gas composition in biogas
"The column was easy to install and set up. I have used this column to analyse gas composition in biogas for over a year and the column still works well. The peaks are prominently sharp."
Review date: 17 Apr 2019 | ShinCarbon ST Columns
Status:
Reviewer Member since: 2019
Organization: University of Liverpool
-
- Ease of use
- After sales service
- Value for money
Great.
Rating: 5.0
Review date: 12 Apr 2019 | ShinCarbon ST Columns
Application Area:GC measurement
"This column is very easy to use and we already bought twice. It can separate H2, CO, CH4 and CO2."
Review date: 12 Apr 2019 | ShinCarbon ST Columns
SilcoSmooth Stainless Steel
-
Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling.
-
Rapid separations of permanent gas/light hydrocarbon mixtures.
-
Excellent compatibility with most GC detectors—minimal bleed, minimal baseline rise.
-
Preconditioned, less than 30 minutes to stabilize.
-
Maximum temperature of 280 °C/300 °C.
Product Overview
