LPI1010 High Voltage EIS Test System
LPI1010 is designed to accommodate the low impedance of batteries and fuel cells.
The supplier does not provide quotations for this product through SelectScience. You can search for similar products in our Product Directory.
Key Specifications include:
- Three models - 10, 100, 1000 V, EIS up to 100 kHz**
- 16-bit resolution
- Galvanostatic or Hybrid EIS
****Actual bandwidth depends upon the bandwidth of your electronic load or power supply
Decrease battery testing time using multisine EIS
Gamry Instrument’s multisine Electrochemical Impedance Spectroscopy (EIS) has the potential to decrease battery testing time by over a factor of three. EIS has become a standard technique in the testing of batteries and battery materials. In this application note, Gamry Instruments explains how single sine EIS analysis is performed followed by how they have implemented multisine EIS.
EIS of difficult samples
Electrochemical Impedance Spectroscopy (EIS) is a technique that can be applied to various systems. This white paper is designed to give helpful information for systems that are a bit more challenging to measure. Typical examples would include barrier coatings, very corrosion-resistant materials, and very low impedance samples such as large supercapacitors (on the order of hundreds or thousands of Farads).
EIS of organic coatings and paints
This application note describes the effects that a potentiostat can have on electrochemical impedence spectroscopy (EIS) measurements of coated metals. Discover recommendations for getting meaningful EIS spectra on coating systems that are typically difficult to measure.
