Solid-Phase Extraction Products & Reviews

Polydimethylsiloxane (PDMS)- non-polar SPME Fibers.Solid Phase Microextraction (SPME) is an innovative, solvent-free sample prep technology that is fast, economical, and versatile. SPME uses a fiber coated with a liquid (polymer), a solid (sorbent), or a combination of both. The fiber coating removes the compounds from your sample by absorption in the case of liquid coatings or adsorbtion in the case of solid coatings. The S…

Simplify Your Liquid-Liquid Extractions with Faster, Easier, and More Reliable SLE

Robust, Accurate Polymeric Solid Phase Extraction (SPE) Products

Positive pressure 96-well plate sample processing with Presston 1000 offers an advanced alternative to traditional vacuum manifold processing. To offer a wider applicability, Presston 1000 is equipped for processing samples in both a low pressure setting for typical solid phase extraction steps and a high pressure setting for very viscous sample processing and for sample dry down.  In addition, Presston 1000 is compatible with…

The Resolvex A200 provides fully automated ppSPE in 1 ml columns and 96-well plates. It uses proven and reliable syringe pump technology to precisely and accurately deliver up to 11 protocol solvents.

A Rapid Solid Phase Extraction (SPE) Solution

Graphitized Non-Porous Carbon  

Extraction and concentration without the low background contamination. Per- and polyfluoroalkyl substances (PFAS) are a growing global concern. Now your lab can extract and concentrate PFAS without worrying about low background contamination through the power of Oasis WAX for PFAS Analysis, a comprehensive quality-control pre-screening test for 32 PFAS.

Available retention mechanisms include reversed phase, ion exchange, normal phase and mixed mode

MEPS (patent pending) performs the same function as SPE, namely the purification or speciation of samples, but with some significant differences: MEPS works with much smaller samples (as small as 10µL) than full scale SPE MEPS can be fully automated – the sample processing, extraction and injection steps are performed on-line using the same syringe MEPS is applicable to GC and LC Significantly reduces the volume of solvents an…

Strata-X Drug B and N Solid Phase Extraction (SPE) sorbents are designed and quality control tested for basic and neutral drugs of abuse analysis, respectively. The sorbents are QC tested using drug probes from urine samples so that you can have confidence in your results. The sorbents also do not require conditioning/equilibrating steps, saving both time and solvent.

A breakthrough in sample automation and concentration for GC–MS

Bond Elut C18 is the most hydrophobic, bonded silica sorbent available in the Bond Elut range. It is the most popular SPE sorbent because of its extreme retentive nature for nonpolar compounds. C18 is generally regarded as having the broadest spectrum of retention among bonded silica sorbents, since it retains most organic analytes from aqueous matrices. 

A variety of empty reservoirs is available to increase the sample capacity of Bond Elut extraction cartridges. These tubes can also be used to pack custom SPE cartridges with bulk Bondesil sorbents or other desired sorbent. They are available from 1 to 60 mL. 

Bond Elut PSA is an alkylated amine sorbent that contains two different amino functionalities, one secondary and one primary. This gives a slightly higher pKa and ionic capacity compared to Bond Elut NH2. PSA has a significantly higher carbon load than most amino functional sorbents and thus is a better choice for polar compounds, which retain too strongly on Bond Elut NH2.

The GlycoWorks Product Line was developed and designed to compliment the existing Waters Glycan Application Solution. Concentrating on 2-AB labeled N-Glycan, this sample preparation offering and complimentary standards provides a unique, comprehensive yet versatile solution. The GlycoWorks HILIC uElution Plate is ideal for removing contaminants like salts and detergents from hydrophilic analytes, such as carbohydrates, prior…

QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) is a sample extraction and clean-up technique used for the analysis of multiple pesticide residues in agricultural products. UCT manufactures a wide variety of pre-filled tubes and reagent pouches for all QuEChERS method variations including PSA, C18, buffers, anh. MgSO4, NaCl, ChloroFiltr, and carbon.

The FASt Well Plate is a novel approach to improved sample preparation for LC/MS analysis. The well plate employs a one step process to prepare urine samples for analysis of multiple drugs and metabolites. By quickly and efficiently reducing the amount of unwanted matrix and particulates in the final sample, the analysis can proceed with less chance of matrix suppression and LC column clogging.

ISOLUTE SLE+ Supported Liquid Extraction plates and columns offer an efficient alternative to traditional liquid-liquid extraction (LLE) for bioanalytical sample preparation, extracting up to 400 µL aqueous sample.

Previously known as SPE-DEX ® 3100

Previously known as SPE-DEX ® 5000

Solid Phase Extraction is a fast and efficient sample preparation technique for cleanup or concentration for analysis, HPLC, GC, TLC, UV, IR and an excellent tool for method development. Ultra-high performance Chromabond SPE Cartridges are available in polypropylene (standard & LV) and glass tubes from 1 to 70ml sizes precision packed with a wide array of sorbents: SiOH, Alumina (A, B,N), C18, C8, C4, C2, Cyclohexyl, Phenyl, N…

The SupelMIP SPE line consist s of highly cross-linked polymers that are engineered to extract a single analyte of interest or a class of structurally related analytes with an extremely high degree of selectivity. This is possible because selectivity is introduced during MIP synthesis in which a template molecule, designed to mimic the analyte, guides the formation of specific cavities or imprints that are sterically and chemi…

A unique microbiology manifold that allows you to optimize testing without sacrificing cleanliness. With interchangeable components and coupling devices, the manifold takes direction from you. No more “dirty” manifolds: Microbial cross contamination of your sample is a thing of the past. The manifold is designed to fit most laboratory autoclaves by separating into manageable components. Double testing Capacity: A large…

Energized Dispersive Guided Extraction - The New Leading Edge of Sample Preparation.