Spectroscopy Products & Reviews

The new generation of Eppendorf ThermoMixer® and ThermoStat incubator raise sample preparation to the next level Ever since the launch of the company’s first performance-defining Mixer and the first Thermostat in 1964 Eppendorf has been at the forefront of mixing and temperature control technology for µL volumes. Thanks to Eppendorf’s continuous development, an exciting new generation of Temperature Control and Mixing Instrume…

ultraWAVE has already revolutionized and enhanced the way analytical chemists think to sample preparation for trace metal analysis in hundreds of laboratories all over the world. ultraWAVE is based on the SRC (Single Reaction Chamber technology), invented by Milestone several years ago ( EP0728038B1 ). SRC technology achieves extraordinary performance capabilities combining microwave heating with a high-pressure reactor which…

The DMA-80 mercury determination system can analyze any matrix (solid, liquid or gas) without any pre-treatment or chemical additions in as few as 6 minutes in full compliance with EPA method 7473. With thousands of units installed, Milestone defines the benchmark for direct mercury determination a wide range of industries: environmental, food energy, cement, cosmetics, agriculture, mining and petrochemical.

The process of fat determination in food and feed matrices is a routine analysis still relies on outdated and matrix-dependent methods which use obsolete and time-consuming technologies. The ETHOS X offers a new approach to gravimetric fat determination, moving toward a more modern, greener and more efficient approach to total fat, Fatty Acid Methyl Ester (FAME) and free fat determinations in food and feed matrices.

Microwave-assisted solvent extraction offers superior lab efficiency in the determination of organic pollutants with microwave green extraction technique. Typical applications include chlorinated pesticides, semi-volatile organics, PAHs, PCBs, chlorinated herbicides, phenols, organophosphorus pesticides, dioxins and furans. ETHOS™ X with the fastEX-24 rotor allows the simultaneous extraction of 24 samples in 40 minutes with mi…

The ETHOS™ LEAN collects Milestone experience and embraces all these values into a compact and economical solutions for sample preparation, matching the requirements of laboratories that approach microwave digestion without the needs of high-volume labs.

The features of the new ultraWAVE 3 merge with those already intrinsic in the SRC technology so that labs will experience higher performance, greater productivity, and more streamlined workflow, providing them with improved competitiveness and a lower cost of ownership. Thanks to its superior digestion capabilities that result from its higher temperature and pressure capabilities, ultraWAVE 3 microwave system provides great…

The Quantus™ Fluorometer is an easy-to-use and affordable single-tube fluorometer.   The highly sensitive instrument is preprogrammed with QuantiFluor® Dye protocols for single-stranded DNA, double-stranded DNA and RNA quantitation but is also compatible with other fluorescent assays. Quantus™ Fluorometer does the math for you and displays your concentration after each measurement automatically. No computer is…

The mass spectrometry-compatible yeast and human protein extracts are designed specifically for mass spectrometry applications.   The extracts are predigested and cleaned up by solid-phase extraction for immediate use in liquid chromatography/mass spectrometry (LC/MS) analysis. Both the yeast and human extracts also are available in an intact undigested form to provide a test material for optimizing mass spec protei…

The GloMax® Explorer System is the newest member of the GloMax® System detection instruments. This multimode reader allows you to get up and running quickly, generating the data you need from your experiments. Simply unpack it, plug it in, and begin your experiments.

A Complete Solution for Monitoring LC and MS Instrument Quality Control and Performance. In combination with an accompanying software tool, the 6 × 5 LC-MS/MS Peptide Reference Mix provides a convenient way to assess LC column performance and MS instrument parameters, including sensitivity and dynamic range. Consists of 30 peptides; 6 sets of 5 isotopologues of the same peptide sequence, differing only in the number o…

Most flexible Multi-mode Microplate Reader for Assay Development

The FLUOstar Omega is a multimode microplate reader perfect for life science research laboratories.

The SPECTROstar Omega microplate reader is a part of the BMG LABTECH’s family of readers that contain a CCD-based spectrometer for ultra-fast, full spectrum absorbance measurements.

The most sensitive microplate reader for high-throughput screening

Absorbance microplate reader from BMG LABTECH

The Specac Mini-Pellet Press is an entry-level laboratory hydraulic press for the preparation of high-quality 7mm KBr pellets for transmission FTIR analysis. With a rugged and durable design, this press is intended for regular laboratory use with maintenance-free operation. Specac’s Mini-Pellet Press is designed to be used on a laboratory benchtop, but is small in size and light enough in weight to allow it to be moved to d…

Specac manufactures a wide range of high-quality Evacuable Pellet Dies suitable compacting powdered samples into discs or briquettes. These are particularly well suited for the preparation of solid KBr pellets for FTIR molecular spectroscopic analysis and XRF pellets for X-Ray Fluorescence atomic spectroscopic analysis (as required by a number of USLP and ASTM methods), but also find use in a broad range of other applications.…

Specac’s High Temperature High Pressure Cell (HTHP) Accessory is a multipurpose cell for the FTIR analysis of solid samples in transmission, decomposition, or specular reflectance modes. Sample temperatures up to 800ºC can be obtained and the cell can operate at pressures from vacuum (0.1 torr) to 1000 psi for in-situ reaction studies. The standard HTHP Cell (GS05850) can be used for transmission analysis of 13 mm diameter…

Specac’s Omni Cell System presents a novel approach for the analysis of liquid, mulls, pastes, and cast film samples in UV, Vis, NIR, and IR transmission spectroscopy, with one cell mount being suitable for all applications.

The Quest™ ATR is a single-reflection ATR accessory from Specac designed for routine use in academic and industrial laboratories.  With features designed to inspire confidence in the quality of results and reliability in use, this product sets the benchmark in performance and value in FTIR-ATR Spectroscopy. 

FT-IR spectroscopy's latest innovation in liquid transmission analysis

Meet Absorbance One, the UV/VIS spectrophotometer, that's bespoke to your assay! The Absorbance One brings world-class specifications to the palm of your hand. Disrupting the idea of centralized equipment, the Absorbance One’s minimal footprint and low price point mean it is available to every lab - and even every workstation. Designed for specific applications, the Absorbance One is your decentralized UV-visible spectrophoto…

Absorbance Microplate Reader for ELISA and Protein Assays

Process and interpret all your analytical data in one common interface