Separations Products & Reviews

RediSep Rf Gold C8 reversed-phase columns are packed with 20–40 µm spherical bonded silica, providing improved separation. Achieve near prep-HPLC results with greater sample recovery to easily purify up to gram-scale on your Flash system. Increased pore size optimized for purification of larger molecules like peptides and proteins.

Enhance analyte sensitivity up to 10 times and reduce interference  

One autosampler for both oils and coolants  

One autosampler for both oils and coolants  

Volumetric Sample Praparation Station

The CombiFlash NextGen 300 is configurable to your needs. Like the 300+, safety features including active vapor, solvent level and waste-level sensing are standard. The system is designed for liquid injections, operating at up to 300 psi (20 bar).

The CombiFlash NextGen 100 offers flow rates up to 100 mL/min and operating pressures up to 150 psi (10 bar). This is an economical, basic system designed to perform both normal and reverse phase purifications.

ETHOS™ X microwave extraction line allows quick heating of the cannabis material for terpene isolation. Solvent-free extraction process takes only a few minutes and prevents any thermal degradation often noticed during use of conventional extraction methods. The fresh and characteristic taste of strain-specific cannabis is maintained, and high-quality terpenes are assured. The ETHOS X 2.0 is our latest generation of benchtop…

Proteinase K from Tritirachium album ELEVATE  

Proteinase K from Tritirachium album ELEVATE

The QuEChERS Clean-up step is rapidly completed using the QuICK QuEChERS cartridge. This self-contained cartridge contains 110 mg of anhydrous MgSO4 and 180 mg of PSA. Placed on the end of a disposable syringe, the QuEChERS extract is pushed through directly into a sample vial for analysis. Clean-up is equivalent to dSPE clean-up, but faster and easier, eliminating the need for centrifugation.

Pre-packed 6 ml anion exchange SPE cartridges are made to the exact specification of EPA Method 548 to assure high capture efficiency and consistent results for excellent analytical reproducibility.

Airborne laboratory contamination may interfere with solid-phase extraction results. This problem is easily prevented by using the Zero-Blank filter. Using an adaptor (included), this cartridge is fitted on top of the SPE cartridge during the drying step and captures potential contamination making results more accurate.

Clean, activated, and ready-for-use, 30 mesh copper granules remove unwanted elemental sulfur from pesticide and PCB extracts. Granules are much easier to use than copper powder or TBA and eliminate the need for toxic mercury.

Chlorophyll in QuEChERS extracts must be removed to reduce potential instrument downtime. This is removed from extracts using graphitized carbon black (GCB) Unfortunately, GCB also removes planar analytes reducing analytical accuracy. ChloroFiltr®, used in place of GCB in dSPE tubes, removes unwanted chlorophyll without removing pesticides or environmental analytes. No change in procedure are required.

When clean plastic cartridges are not clean enough. 6 mL glass SPE cartridges can be packed with your choice of UCT sorbent using PTFE frits and individually sealed in certified Mylar for purity.

Enviro-Clean 500mg/6mL cartridge PSDVB w/Polyethylene frits. It is used with EPA Methods 526, 527, 528, 529 and 8330.

Select pH Buffer Pouches - UCT has developed a line of premeasured “ready-to-use” phosphate and acetate buffer pouches. These pouches contain the correct quantity of reagent to quickly and accurately prepare buffers at the correct pH and concentration to simplify solid-phase extraction methods.

Styre Screen® Extraction Columns contain an ultra clean, highly cross-linked styrene and divinylbenzene copolymer. The Styre Screen particles have an average particle size of 30 microns and a very high analyte capacity making them ideal for standard solid phase extraction applications. The increased analyte capacity means that less sorbent bed mass is needed which results in faster flow rates and less solvent use. Higher th…

XtrackT® columns are gravity-flow SPE columns that allow for extraction of acids, neutrals, bases in viscous samples such as equine urine, post-mortem blood and tissues, amniotic fluid, and meconium.

The Universal Vacuum Manifold system accommodates 24, 48 and 96 well plate configurations. This system includes a collection plate, extraction plate, manifold and vacuum gauge waste base for all wellplates.

Universal C18 - Enviro-Clean SPE Cartirdges Enviro-Clean® cartridges are designed for use by analysts that demand a clean, dependable and rugged product for low level environmental analyses. Universal C18 is used for the extraction of pesticides, herbicides and PCBs, etc.Part # ECUNIC18

These sorbents are composed of a silica backbone bonded with hydrocarbon chains. They are used to extract compounds, which exhibit non-polar or neutral characteristics, from complex matrices. The C18 phase is the most popular phase.  UCT offers a range of hydrocarbon chain lengths from C2 to C30. In addition, we offer isobutyl, tertbutyl, phenyl, and cyclohexyl bonded phases.

Compounds are retained on hydrophilic sorbents through polar interactions including hydrogen bonding, pi-pi or dipole-dipole interaction.  Compounds typically extracted on a hydrophilic column include analytes which have polar groups, including amines, hydroxyls and carbonyls. Elution is performed by strong polar solvents. For these types of extractions UCT offers various types of base silica, Florisil®, Alumina's, cyanopropy…