Life Sciences Products & Reviews

ThinSealTMpolyester sealing films are just 25 µm thick, clearer and marginally peirceable with single-channel pipettes for sample recovery. ThinSeal sealing film dimensions are 79.4 x 141.0 mm.Features:Functional temperature range from -40°C to +120°CAvailable sterile and non-sterile

ThinSealTMpolyester sealing films are just 25 µm thick, clearer and marginally peirceable with single-channel pipettes for sample recovery. ThinSeal sealing film dimensions are 79.4 x 141.0 mm.Features:Functional temperature range from -40°C to +120°CAvailable sterile and non-sterile

A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II…

A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal I…

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 384-well plates. AlumaSeal 384TM sealing films have one end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 137.3 mm x 82.5 mm (including single 13.5 mm end tab).Features:heat & cold resistant, recommended for temperatures from -80 °C to +120 °Ccertified DNase-, RNase-, and nucleic-acid-free

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 96-well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96TM sealing films have one partial-width end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 127.0 mm x 77.8 mm (including single 9.5 mm end tab).Features:fits inside rim of raised-rim plateheat & cold resistant, recommended…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

The UNIQO 160 is an all-in-one device for complete automation of indirect immunofluorescence assays (IFA) from primary sample to result proposal. The device performs all assay processing steps, as well as image acquisition and generation of result proposals using the AI-enhanced evaluation software EUROPattern Classifier. Via the EUROLabOffice 4.0 middleware, analyses with the UNIQO 160 integrate seamlessly into lab workflows.

The EUROLabWorkstation ELISA provides fully automated processing of ELISA in laboratories with high sample throughput. The system has a high capacity of up to 15 microplates and can process more than 200 tests per hour. Ten washable needles, complementary accessories and a separate robotic arm for handling the microplates enable unparalleled sample throughput. Intuitive software guides the user through all work steps.

The TT24-7 continuous air/gas monitoring system incorporates two electrically-cooled traps which operate in tandem to ensure 100% data capture.   The TT24-7 thermal desorption system is a robust, transportable thermal desorption unit, convenient for installation onsite or in mobile response vehicles as well as conventional laboratories. The TT24-7 interfaces to GC(MS) or process MS technology and incorporates two electri…

ACTI-VOC™ is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling applications. Optimised for thermal desorption tubes Unlike other personal monitoring pumps on the market, ACTI-VOC is optimised…

On-line sampling module for the UNITY-xr™ thermal desorber

Thermal desorption sorbent sampling tubes for air sampling. Backed up by fast and friendly service, Markes’ tubes provide optimum sampling and analytical performance. Our range includes everything from cost-effective packages of industry-standard tubes to the last word in sorbent tube innovation. Features: Our industry-standard (3½-inch (89 mm) long x ¼-inch (6.4 mm) o.d.) sorbent tubes are available in stainless stee…

Accurate and repeatable gas flow measurement. Accurate and repeatable gas flow measurement is fundamental to obtaining good results from your thermal desorption-gas chromatograph. The traditional bubble flowmeter, relying as it does on the reaction time of the operator, is a potential source of error.The digital flowmeter eliminates this source of error and makes gas flow easement easier and more accurate. The flowmeter allow…

Water removal device for use with UNITY™–Air Server-xr™ thermal desorption systems.