Cannabis Testing Products & Reviews

The LCTech D-EVA is an automated vacuum centrifuge for rapid, parallel concentration of organic solvents. Using infrared heating and sensor-controlled end-point detection, it delivers high analytical reliability, increased throughput, and reduced manual effort for routine laboratories.

The EPLED picosecond pulsed LEDs are a new excitation source for fluorescence lifetime measurements. In Time Correlated Single Photon Counting (TCSPC), they bridge the gap between the nanosecond flashlamp and expensive mode locked Titanium Sapphire femtosecond lasers in the UV region. The EPLEDs are pre-adjusted in respect to pulse width and peak power, with particular attention paid to reducing both secondary shoulder and a l…

THE PERFECT SOLUTION FOR RADIO HPLC IN QUALITY CONTROL  

THE PERFECT SOLUTION FOR PET QUALITY CONTROL  

Mass Spectrometry Software for Spectral Interpretation and Component Characterization

Characterization and Identification of Compounds Using LC/UV/MS and GC/MS Data

Method development software for the chromatography expert. ACD/AutoChrom helps experts develop chromatographic separations using QbD principles. It uses a workflow-based structure to streamline and track a project.

Rules-Based Fragment Prediction for Mass Spectrometry

ACD/Method Selection Suite is your software assistant for LC and GC method development. When you want to develop methods using Quality by Design (QbD) principles, and make every experiment count, reach for Method Selection Suite.

Characterize Samples and Identify Unknown Components

Get systematic chemical names for structures and produce structures from names - ACD/Name generates chemical names according to IUPAC rules, converts chemical names to structures, and easily handles challenging areas of nomenclature.

SmartChem® 800 Discrete Analyzer is a fully automated, high-capacity wet chemistry platform engineered for modern commercial laboratories. Delivering fast, reliable photometric analysis with true walk-away operation, it is designed for labs seeking maximum throughput, efficiency, and cost control.

The SmartChem ® 600 is a wet chemistry equipment that consolidates different techniques from your laboratory into a single platform. It automates photometric and electrochemical analysis, and optimizes  laboratory operation (running samples, calibrations, standards, maintenance, operator training). It run 600 tests per hour (exists for 200 or 450 tests) and can load on board up to 200 samples, and up to 100 ready-to-use reage…

Previously known as SolventTrapSVOC Solvent Recovery System

Automated sample preparation workstation for high volume samples  

SPE Disks for Water Extraction

The TT24-7 continuous air/gas monitoring system incorporates two electrically-cooled traps which operate in tandem to ensure 100% data capture.   The TT24-7 thermal desorption system is a robust, transportable thermal desorption unit, convenient for installation onsite or in mobile response vehicles as well as conventional laboratories. The TT24-7 interfaces to GC(MS) or process MS technology and incorporates two electri…

ACTI-VOC™ is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling applications. Optimised for thermal desorption tubes Unlike other personal monitoring pumps on the market, ACTI-VOC is optimised…

Non-invasive tube-based biological monitoring

On-line sampling module for the UNITY-xr™ thermal desorber

Robust and easy-to-use soil gas sampler. The VOC-Mole is a stainless steel assembly that is inserted into the ground, allowing soil gas to be sampled onto a sorbent tube, for analysis by thermal desorption (TD)–GC–MS.The VOC-Mole is simple to use and easy to transport, and perfect for any analyst wishing to monitor levels of volatile organic compounds in soil.Features: Organic pollutants pass through holes in the hollow t…

Grab-sampler for air sampling. Easy-VOC is a hand-held device that facilitates the rapid ‘grab’ sample collection of small volumes (<500 mL) of air directly onto sorbent tubes without the need for calibrated pumps.Sorbent tubes attach to the end of the Easy-VOC and air/gas is drawn directly onto the tube. Easy-VOC regulates the flow rate independent of the force used to pull the air through.Grab sampling involves collecting v…

Thermal desorption sorbent sampling tubes for air sampling. Backed up by fast and friendly service, Markes’ tubes provide optimum sampling and analytical performance. Our range includes everything from cost-effective packages of industry-standard tubes to the last word in sorbent tube innovation. Features: Our industry-standard (3½-inch (89 mm) long x ¼-inch (6.4 mm) o.d.) sorbent tubes are available in stainless stee…

Multi-tube sequential sampler. The MTS-32™ is a compact, portable sampler for the unattended sequential sampling of air onto a series of sorbent tubes. Constant-flow pump technology ensures that the same volume of air is collected onto each tube.The MTS-32 is ideal for analysts needing monitor the concentrations of organic vapours in air as they fluctuate over extended time periods.Features: Sequentially samples on up to…

The helium leak detector is a portable, highly sensitive instrument designed to detect helium carrier gas leaks in thermal desorption and GC systems. Gas leaks are indicated with both an indicator lamp display and an audible alarm. The long, flexible probe makes it convenient to detect small and hard-to-reach gas leaks. Using the detector for gases other than helium is easily achieved by changing the polarity setting. The det…