Cannabis Testing Products & Reviews

ITEX Dynamic Headspace - Rapid and efficient enrichment of volatile and semi-volatile

Stay in contact with your syringes Each Smart syringe is equipped with its own read/write chip with preset parameters, ranges, usage tracking and a unique ID. The syringe is automatically recognized by the PAL System and all important parameters are loaded to secure highest precision and process safety.

The TT24-7 continuous air/gas monitoring system incorporates two electrically-cooled traps which operate in tandem to ensure 100% data capture.   The TT24-7 thermal desorption system is a robust, transportable thermal desorption unit, convenient for installation onsite or in mobile response vehicles as well as conventional laboratories. The TT24-7 interfaces to GC(MS) or process MS technology and incorporates two electri…

ACTI-VOC™ is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling applications. Optimised for thermal desorption tubes Unlike other personal monitoring pumps on the market, ACTI-VOC is optimised…

Non-invasive tube-based biological monitoring

On-line sampling module for the UNITY-xr™ thermal desorber

Robust and easy-to-use soil gas sampler. The VOC-Mole is a stainless steel assembly that is inserted into the ground, allowing soil gas to be sampled onto a sorbent tube, for analysis by thermal desorption (TD)–GC–MS.The VOC-Mole is simple to use and easy to transport, and perfect for any analyst wishing to monitor levels of volatile organic compounds in soil.Features: Organic pollutants pass through holes in the hollow t…

Grab-sampler for air sampling. Easy-VOC is a hand-held device that facilitates the rapid ‘grab’ sample collection of small volumes (<500 mL) of air directly onto sorbent tubes without the need for calibrated pumps.Sorbent tubes attach to the end of the Easy-VOC and air/gas is drawn directly onto the tube. Easy-VOC regulates the flow rate independent of the force used to pull the air through.Grab sampling involves collecting v…

Thermal desorption sorbent sampling tubes for air sampling. Backed up by fast and friendly service, Markes’ tubes provide optimum sampling and analytical performance. Our range includes everything from cost-effective packages of industry-standard tubes to the last word in sorbent tube innovation. Features: Our industry-standard (3½-inch (89 mm) long x ¼-inch (6.4 mm) o.d.) sorbent tubes are available in stainless stee…

Multi-tube sequential sampler. The MTS-32™ is a compact, portable sampler for the unattended sequential sampling of air onto a series of sorbent tubes. Constant-flow pump technology ensures that the same volume of air is collected onto each tube.The MTS-32 is ideal for analysts needing monitor the concentrations of organic vapours in air as they fluctuate over extended time periods.Features: Sequentially samples on up to…

The helium leak detector is a portable, highly sensitive instrument designed to detect helium carrier gas leaks in thermal desorption and GC systems. Gas leaks are indicated with both an indicator lamp display and an audible alarm. The long, flexible probe makes it convenient to detect small and hard-to-reach gas leaks. Using the detector for gases other than helium is easily achieved by changing the polarity setting. The det…

Accurate and repeatable gas flow measurement. Accurate and repeatable gas flow measurement is fundamental to obtaining good results from your thermal desorption-gas chromatograph. The traditional bubble flowmeter, relying as it does on the reaction time of the operator, is a potential source of error.The digital flowmeter eliminates this source of error and makes gas flow easement easier and more accurate. The flowmeter allow…

Package for monitoring benzene and other VOCs at refinery perimeters

Water removal device for use with UNITY™–Air Server-xr™ thermal desorption systems.

The POD Sampler (POcket Diffusive Sampler) is a radial diffusive sampler for volatile organic compounds (VOCs), compatible with analysis by thermal desorption.

Markes’ stainless sorbent tubes are available in two sizes: 3.5” x ¼” (industry-standard), and 4.5” x 6mm (DAAMS). Industry-standard tubes are compatible with Markes, PerkinElmer, Shimadzu, Dani, CDS and Gerstel 3.5+ thermal desorption (TD) systems.

Run at Higher Flow Rates and Lower Backpressures without Sacrificing Resolution

Bringing You Closer to Universal DetectionWhen carrying out chromatographic runs, do you require any of the following? •Need confidence that you have seen all the peaks in your separation •Require unattended, reproducible operation •Collect fractions that do not have chromophores for UV/Vis triggering With Waters new 2420 ELSD, you’ll get the answers you’re looking for faster. And, the Waters 2420 ELSD is the smallest ELSD on…

DisQuE Dispersive Sample Preparation used for QUECHERS Method AOAC Method 2007.01. The kit consists of 100 units each of salt pouches, empty 50mL centrifuge tubes and clean-up tubes. Each DisQuE pouch contains 6 grams of magnesium sulphate and 1.5 grams of sodium acetate. Each 2 mL DisQuE Clean-Up tube contains 150 mg of magnesium sulphate and 50 mg PSA (primary-secondary amine SPE sorbent)

The Prep 150 LC System is a fit for purpose solution designed for scientists requiring robust system performance with intuitive software for dedicated personal purification or quick adoption in centralized labs. Systems are designed to satisfy your application requirements, whether you are processing a few samples a day, or your workload demands greater through-put with unattended automation. The Prep 150 LC System allows you…

eXtended Performance [XP] 2.5 µm Columns are high efficiency, low backpressure HPLC columns that can be easily utilized across all HPLC, UHPLC and UPLC Technology platforms. Low Backpressure. High Throughput. Improved Productivity. • 40% lower backpressure than sub-2-µm UPLC columns • Increase flow rate to increase throughput • Equivalent backpressure and superior performance to core-shell columns • Improve HPLC productivity 2…

The 1.7 µm Ethylene Bridged Hybrid [BEH] particle is one of the key enablers behind UPLC® technology.It is available in three different pore sizes [130Å, 200Å and 300Å] and several bonded phases for reversed-phase and hydrophilic interaction chromatography and is applicable from small molecule to large biopharmaceutical analysis. Due to the intrinsic chemical stability of hybrid particle technology, a wider usable pH range [pH…

The TargetLynx™ Application Manager automates sample data acquisition, processing and reporting for quantitative results.It incorporates a range of confirmatory checks that identify samples that fall outside user-specified or regulatory thresholds. Identify Non-compliant Samples TargetLynx rapidly identifies and flags samples where: Analytes are above a specified maximum reporting level (MRL) Analyte confirmatory ion rat…

The Waters Biopharmaceutical Platform Solution with UNIFI® integrates robust UPLC®/MS characterization technology with the UNIFI Scientific Information System for applications in bioseparations, intact protein mass analysis, peptide mapping and released glycan analysis.This platform unites all aspects of biotherapeutic analyses and workflows, enabling organizations to apply high resolution analytics across the development proc…

The µPorasil/Porasil column brand silica has 125A pore size with 325m2/g surface area. With a range of different particle size offerings, you have the option of scalability for preparative application with µPorasil column as a QC tool.