Member since: 2012
"This is an up-to-date machine which only requires one person to handle it. The inside engine is strong and fast. Service is very good."
Variable Speed Rotor Mill PULVERISETTE 14 classic line – the all-purpose mill for rapid size reduction with highest rotational speed for finest grinding results in shortest times.
The FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 classic line grinds rapid and effectively soft to medium-hard, brittle as well as fibrous samples. Even the comminution of samples, which are difficult to grind or temperature-sensitive samples and plastics are no problem for the PULVERISETTE 14 classic line due to its very efficient air cooling. In addition to the special air cooling of the PULVERISETTE 14 classic line, the FRITSCH-impact blades allows together with a sieve ring a very gentle grinding of the sample, which in many cases without impact blades would not be possible.
Increased grinding action for a particularly fast and effective grinding, the heat load is minimized. And the ideal solution for especially temperature-sensitive materials such as powder coatings or plastics, as well as for smoothly pre- and fine grinding of hard-brittle to soft, fatty sample or samples with a residual moisture. The Variable Speed Rotor Mill PULVERISETTE 14 classic line with a real top speed of 20.000 rpm is the Turbo Mill for sample preparation. With a feed particle size of < 10 mm, a final fineness of up to 40 µm can be achieved. The throughput depends on the material and lies between 0.05 and 5 litres per hour. Rotors, sieve rings and collecting vessels made of different materials and in different sizes enable an optimal adjustment of the instrument to the application.
Features of FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 classic line include: