Environmental Monitoring and Testing Products & Reviews

Equivalent to XAD-2 Resin Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, the Fuel Oil Degradation Mix contains these compounds for retention time determination.

The FM4 Air Sampler is the world's first portable device for simultaneous collection and analysis of particle and gas-phase PFAS in air. It uses an impactor and three collectors, including the newly developed GAIAC adsorbent, which enables efficient collection and elution of gas-phase PFAS. PFAS can be analyzed by GC-MS/MS and LC-MS/MS after solvent elution.

The SP209 Series Air Sampling Pump offers dual sampling in a single unit. With two independent lines, each with its own flow control, it allows precise, simultaneous sampling at different flow rates. Compact and portable, the SP209 is ideal for environmental monitoring, indoor air studies, and VIAQ testing.

ANATEL PAT700 TOC Analyzers are specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection.

The Milestone subCLEAN is a compact and easy-to-use sub-boiling system, where all parts in contact with acids are made of high-purity fluoropolymers. Offering an optimal purification method for preparation of high purity reagents, our subCLEAN system is therefore suitable for HF, as well as for HNO3 and hydrochloric acid purification.

Sample preparation is a central part of elemental analysis and includes several manual and time-consuming steps. Reagent addition into digestion vials or vessels is a tedious and unpleasant process that requires a significant amount of time. The easyFILL Automated Dosing Station addresses these latter challenges using a single platform that ensures the automation of reagent addition and dilution, finally ensuring superior wor…

Stainless Steel Manifold -available in single, 3 and 6 station designs. The 3 and 6 multi-station manifolds allow the simultaneous processing of multiple samples.

HydraFlow ® is the latest addition to the UCT’s family of SPE manifolds geared towards efficient sample processing.  Its unique design provides enhanced precision and streamlined sample extractions for large volume water analysis.

The MD 610 multi-parameter photometer is a versatile water testing device designed for use in the lab, plant, or directly in the field. Pre-programmed with over 120 water testing parameters, it offers a wide range of applications across various industries.

Precise water control with proven and compact measuring system

Our air samplers are able to monitor microbial and aerosol levels in the air, which is useful in many different fields of study. This includes environmental studies, workplace safety, etc.

GeoSpec is an NMR rock core analyser for petrophysical core analysis, including porosity, permeability, fluid typing and T2 measurements.

Fully automated sample preparation system for PFAS and environmental workflows

SmartChem® 800 Discrete Analyzer is a fully automated, high-capacity wet chemistry platform engineered for modern commercial laboratories. Delivering fast, reliable photometric analysis with true walk-away operation, it is designed for labs seeking maximum throughput, efficiency, and cost control.

Non-invasive tube-based biological monitoring

Robust and easy-to-use soil gas sampler. The VOC-Mole is a stainless steel assembly that is inserted into the ground, allowing soil gas to be sampled onto a sorbent tube, for analysis by thermal desorption (TD)–GC–MS.The VOC-Mole is simple to use and easy to transport, and perfect for any analyst wishing to monitor levels of volatile organic compounds in soil.Features: Organic pollutants pass through holes in the hollow t…

Grab-sampler for air sampling. Easy-VOC is a hand-held device that facilitates the rapid ‘grab’ sample collection of small volumes (<500 mL) of air directly onto sorbent tubes without the need for calibrated pumps.Sorbent tubes attach to the end of the Easy-VOC and air/gas is drawn directly onto the tube. Easy-VOC regulates the flow rate independent of the force used to pull the air through.Grab sampling involves collecting v…

Multi-tube sequential sampler. The MTS-32™ is a compact, portable sampler for the unattended sequential sampling of air onto a series of sorbent tubes. Constant-flow pump technology ensures that the same volume of air is collected onto each tube.The MTS-32 is ideal for analysts needing monitor the concentrations of organic vapours in air as they fluctuate over extended time periods.Features: Sequentially samples on up to…

The helium leak detector is a portable, highly sensitive instrument designed to detect helium carrier gas leaks in thermal desorption and GC systems. Gas leaks are indicated with both an indicator lamp display and an audible alarm. The long, flexible probe makes it convenient to detect small and hard-to-reach gas leaks. Using the detector for gases other than helium is easily achieved by changing the polarity setting. The det…

Package for monitoring benzene and other VOCs at refinery perimeters

The POD Sampler (POcket Diffusive Sampler) is a radial diffusive sampler for volatile organic compounds (VOCs), compatible with analysis by thermal desorption.

Alfa Chemistry’s Deformulation and Reverse Engineering Services provide analysis of product composition, material structure, and formulation using qualitative and quantitative techniques. The service supports ingredient identification, formulation profiling, and structural analysis to aid product improvement, quality benchmarking, supply continuity, and technical comparison across diverse materials.

Alfa Chemistry provides comprehensive testing services for alloys, metals, and metallurgical materials, supporting QA/QC and R&D needs. Our capabilities cover mechanical, chemical, physical, and microstructural analysis, as well as corrosion, fatigue, and failure investigations, helping evaluate performance, reliability, and compliance across diverse industrial and engineering applications.

Alfa Chemistry's element analysis platform provides a variety of element analysis technologies to accurately quantify major, minor, and trace elements, as well as carbon, sulfur, and CHNS/O content in a wide range of solid, liquid, and particulate samples.