Microscope Accessories Products & Reviews

Piezo Z axis focussing device

Piezo Z axis focussing device

Isis expanded pupil is newly patented multi-lenticular technology to a new device designed to enhance the ergonomics of all conventional binocular microscopes. Vision’s Isis accessory fits directly into the microscope’s eyepiece tubes to deliver Expanded Pupil technology, offering an exit ray bundle twelve times larger than a traditional eyepiece.Expanded Pupil technology allows a much greater freedom of operator head movement…

The Optoscan monochromator from Cairn Research is the only instrument of its type to offer control of both centre-wavelength and bandwidth with millisecond time resolution. Combined with Cairn signal processing modules and optical hardware it forms the heart of a powerful and flexible microfluorescence system. Alternatively it can be readily integrated into commercial imaging systems, or custom controlled for bespoke applicati…

ramé-hart instrument co. is pleased to offer our Model 100. Based on the classic design of Dr. William Zisman and with over 40 years of experience, this tool is proven for its accuracy and ease of use. Many modular options are available -- including an imaging upgrade kit with camera and software -- and allow the user to make sophisticated measurements.This model provides the surface scientist or technician with the tools nece…

The Lambda TLED is a stand-alone LED light source that can be used with the transmitted light path of a microscope or in other applications with similar requirements. This basic system consists of an LED mounted on a special black-anodized aluminum heat sink and a controller. The Lambda TLED controller has intensity control and on-off control via a switch or TTL logic. The on-off time of the Lambda TLED is The Lambda TLED uses…

Piezo Z axis focussing device

Large format motorised stage for upright microscopes

Meadowlark Optics’ Liquid Crystal Tuneable Optical Filters facilitate spectral analysis of not only a collimated beam, but of an entire object. With no moving parts, a resolution down to 0.001nm and a tuning rate of less than 100ms, these robust filters are calibration free and can replace literally 1000s of filters for applications including fluorescence and absorption microscopy, Raman spectroscopy and solar astronomy. At 38…

Meadowlark Optics manufactures a range of world leading Spatial Light Modulators (SLMs) providing precision beam control. The 2-dimensional Hex series are designed for adaptive optics applications as real-time programmable phase mask for wave front correction, such as a variable iris with no moving parts. With its high optical power handling characteristics, the Linear SLM can be used to alter the temporal profile of femto sec…

The Optosplit II Image Splitter is a simple and elegant device for dividing an image into two separate, spatially equivalent, components that can be displayed side by side on a single camera chip. One Camera Solution - Dual Emission Image Splitter The Optosplit image splitter is sold by Andor as part of our dual wavelength imaging portfolio. It is a simple device enabling a single camera to record images simultaneously at two…

Motorised stage for inverted stages

Motorised stage for upright microscopes able to hold eight slides

Motorised stage for upright microscopes

The DH-40iL Microincubator is designed for imaging live cells under constant temperature and atmospheric conditions. This versatile incubation system enables high resolution image analysis, fluorescence microscopy, and time-lapse imaging studies while accommodating both upright and inverted microscopes. Designed to provide complete environment control for either the Series 40 open bath chambers or 35 mm cell culture dishes. E…

The Bold Line Top Stage Incubator H301 is the latest release from OKOLAB in terms of Top Stage incubation. It delivers superior temperature stability, humidity, CO2 and Oxygen control in a fully integrated fashion. The Bold Line Top Stage Incubator H301 Equipment: Incubating Chamber: fits in the microscope stage and holds the specimen. It is equipped with heated glass lid and Temperature and Humidity sensors. T Unit: Bo…

The Water Jacket Incubator provides superior incubation stability above and below room temperature. Water is pumped from a water bath into the base plate and into the lid, which are both Water Jackets. Temperature Control Mechanism Temperature is directly measured inside a reference Petri-dish and is controlled by circulating water from a water bath into the Water Jacket Chamber. The Temeprature Controller reads the temperatur…

UNO-PLUS All-in-one single specimen incubator with the size of a Multi Well plate. UNO-PLUS Features: All-in-one temperature/humidity/CO2 incubator Top Stage Incubator with the footprint of a Multi Well Plate Fits in any XY stage, with the additon of the Multi Well Plate holder (supplied by the stage manufacturer or by Okolab) Specimen holders for #1 35mm dish, #1 glass slide or #1 chambered coverglass Heated Glass Cov…

Control system for microscope automation

The Okolab Objective Heater is made by a flexible heating collar with a built in temperature sensor, which can be easily fastened around the objective with the supplied Velcro tape. The heating collar can be controlled by a Top Stage Bold Line Temperature controller, by UNO or by the Okolab Stand Alone Temperature Controller. Okolab Objective Heater Features: Temperature controlled rubber band Easy to place around the ob…

The T Glass Plate - Round Transparent and flat surface at controlled temperature for Inverted Microscopes The T Glass Plate fits into the microscope XY stages with circular opening and provides a transparent and flat surface at controlled temperature. The combined action of the conductive glass with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration routine e…

T Glass Table provides a transparent and flat surface at controlled temperature. It can be placed in the optical path of any stereo microscope to provide a large, flat, clear, warm surface where several specimens can be maintained at physiological temperature. The combined action of the conductive glass with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration…

Metal T Plate is a one-button solution for temperature control. Ideal to warm up the specimen during experiments lasting from minutes to hours where humidity and CO2 control are not required. It fits into the microscope stages with 110x160 mm opening. The combined action of the metal plate with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration routine ensure…

Control system for microscope automation

Laser Physics supply a wide range of viewing windows in either glass or polycarbonate.The most heavily tested, as well as the most broadly marked, available in the industry, Kentek’s new acrylic windows are EN 207 & EN 12254 rated. Ideal for viewable window protection, workstation ports or optical tables the new windows have various protection levels covering 315nm – 11000nm. Durable and Scratch resistant the 6NDY, BB2 & IR3…