Separations Products & Reviews

Agilent J&W DB-FastFAME is a cyanopropyl phase engineered for the fast and selective separation of polysaturated and unsaturated FAMEs—even challenging cis and trans FAME isomers—without sacrificing the resolution generally achieved with traditional 100 meter long columns.

The Agilent HLD MD15 Dry Leak Detector uses a mass spectrometer tuned to detect helium, which is used as a tracer gas to locate and/or measure very small leaks in enclosed devices or systems.

Agilent J&W DB-1ms is a nonpolar, low bleed column, with excellent inertness for acids and bases and an extended upper temperature limit. Using low bleed stationary phases in DB-1ms reduces column contribution to background noise, resulting in a higher signal-to-noise ratio and better sensitivity. 

Improve lab productivity with fast, precise injections and upgrade to expand sampler capabilities as your lab needs evolve.

Nexis GC-2030 Offers a Modern Approach to a Classic Chromatographic Technique

Rtx®-1 columns exhibit long lifetime and very low bleed at high operating temperatures. A proprietary synthesis process eliminates residual catalysts that could cause degradation and increase bleed.

• Wide range of stationary phases offers orthogonal separations. • High thermal stability maximizes system ruggedness and sensitivity. • Unrivaled column inertness for accurate analysis of active compounds. • 0.15, 0.18, and 0.25 mm ID formats accommodate varying sample capacities, speeds, and detectors. • Secondary columns come in convenient 2 m lengths for economical method development. GCxGC is a powerful multidimensional G…

Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences. Robust and reproducible column chemistry ensures longer column lifetime and consistent results. 2 minute analysis time increases lab productivity. Stable to 260 °C Don’t forget: Blood alcohol analysis requires dual column confirmation when using GC/FID.

Rtx®-VMS Columns (fused silica) (proprietary Crossbond® phase) • Application-specific columns for volatile organic pollutants by GC-MS • Complete separation of U.S. EPA Method 8260B compounds in less than 10 minutes • Stable to 260 °C • No known equivalent phases

The Rtx®-Volatile Amine column was designed specifically for analyzing volatile amines in difficult matrices, such as water. The unique base deactivation creates an exceptionally inert surface for these sensitive compounds, resulting in highly symmetrical peaks which allow low detection limits. The stable bonded phase yields a column that is not only retentive and highly selective for these compounds, but is also very robust…

Restek has raised the bar with a new high-temperature MXT®-Biodiesel TG column line to complement their fused silica column line for biodiesel analysis. These new MXT® -Biodiesel TG columns are stable to 430°C and offer unique retention gap options that minimize dead volume and leaks.

The Rxi®-PAH GC columns were designed by Restek with a higher phenyl-content stationary phase that provides unique selectivity to separate important polycyclic aromatic hydrocarbons (PAH) for food safety that cannot be distinguished by mass spectrometry. Even difficult priority compounds, such as the European Food Safety Authority (EFSA) PAH4, are easily separated and accurately quantified, results that cannot be achieved on…

Improved resolution and faster analyses, compared to 1701 or phenyl phases, make these the pesticide columns of choice.

midpolarity phase; Crossbond® trifluoropropylmethyl polysiloxane

Deactivation - unbelievably low breakdown for accurate and precise low-level GC analyses.

Low-polarity phase; Crossbond diphenyl dimethyl polysiloxane

Pro EZGC Chromatogram Modeler Propels Method Development Forward

Restek offers a full range of porous polymers, including HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvents.

Removes up to 135 ml of oxygen or 2 g of water.

Flowmeters that can measure flammable gases are becoming mandatory due to the increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW 6000 meter is designed specifically with explosive and flammable gases in mind.

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Quantity discounts not available.

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

For Agilent GCs equipped with split/splitless inlets

For Agilent GCs equipped with split/splitless inlets