Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Packaged 12 inserts in a 12 well plate, 4 plates per case Membrane must be stained for cell visibility
(This is the suggested replacement for 3654) Black wall plates have reduced autofluorescence, higher signal to background ratio and lower CV's. Nonbinding (NBS) surface is a Corning proprietary treatment technology used on polystyrene microplates to create a nonionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular interactions Ideal for reducing protein and nucleic acid binding at low concentrations,…
Nonbinding (NBS) surface is a Corning proprietary treatment technology used on polystyrene microplates to create a nonionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular interactions Ideal for reducing protein and nucleic acid binding at low concentrations, and increasing assay signal to noise Without lids, lids supplied separately Recommended working volume of up to 75 to 200 µL Conforms to stan…
(This is the suggested replacement for 3855 and 353381)Excellent signal dynamic range due to low background fluorescence and enhanced signal intensitySuperior flatness minimizes variability within a plate and between platesFlat bottom wells are compatible with automated dispensers including the PerkinElmer FlexDrop™TC-treated for optimal cell attachmentWorking volume of up to 10 µL"
Ultra-Low Attachment microplates feature a covalently bound hydrogel layer that effectively inhibits cellular attachment Surface minimizes protein absorption, enzyme activation and cellular activation Surface is noncytotoxic, biologically inert and nondegradable Sterilized by gamma irradiation Black wall microplates have low background fluorescence, minimal light scatter and reduced crosstalk Opaque walls to prevent wel…
Ultra-Low Attachment surface with covalently bonded hydrogel that minimizes cell attachment, protein absorption, enzyme activation and cellular activation The surface is noncytotoxic, biologically inert and nondegradable Round bottoms with 330 µL total volume Recommended working volumes of 75 to 200 µL Nonreversable lids with condensation rings to reduce contamination Sterilized by gamma radiation and certified nonpyrog…
Flat bottom, with low evaporation lid. Individually wrapped, sterile, 50/case. Unique labyrinth lid, condensation rings, and deep-well design control contamination, reduce evaporation, and minimize edge effects.Reliable vacuum-gas plasma tissue culture treatment provides well-to-well and plate-to-plate consistency. Crystal-grade virgin polystyrene Nonpyrogenic Standard tissue culture (TC)-treated Convenient, peel-open medi…
Corning® BioCoat™ Matrigel® Invasion Chamber with 8.0 µm PET Membrane in four 6-well Permeable Supports are packaged ready to use in Falcon® Companion Plates, 24/case. Corning BioCoat™ cell culture inserts are pre-coated with extracellular matrix proteins for applications requiring a protein-coated cell surface, such as cell adhesion, growth, invasion, migration and/or differentiation.Storage: -20°C; Shelf life: >= 3 months fr…
Fully Automated PCR Setup, Amplification and Analysis System. The IntelliQube is the first fully automated and high-throughput instrument featuring seamless integration of liquid handling, thermal cycling, detection, and data analysis. The IntelliQube supports quantitative real-time PCR, end-point PCR, and isothermal chemistries, allowing you to realize the benefits of inline automation enabled by the innovative Array Tape™…
Full Range SelectivityFour unique phases developed to provide a different selectivity for successful separations of the most complex mixtures and challenging analytes under reversed phase conditions. Whether your compounds are hydrphobic or polar, Synergi columns provide you with a full range of selectivity, ensuring separation of the most challenging and complex mixtures.
A combination of advanced MS imaging technologies including MALDI, DESI and ion mobility.
High Sensitivity & Performance.
A programmable heated microplate and tube mixer.
Vion IMS QTof is a high resolution QTof mass spectrometer that delivers the selectivity of ion mobility to every scientist, for every analysis. Does high resolution, accurate mass data always lead to the correct answer first time? Avoid additional confirmatory experiments by utilizing the selectivity of ion mobility. Featuring new geometry and including XS Ion Optics and the QuanTof2 detection system, the Vion IMS QTof has…
The Thermo Scientific™ Q Exactive™ GC system is the first-ever combination of high resolution gas chromatography with high-resolution/accurate-mass (HR/AM) Orbitrap detection for the most comprehensive sample characterization. This easy-to-use system provides the most comprehensive characterization of samples in a single analysis for the highest confidence in compound discovery, identification, and quantitation. Building upon…
The DT-810 Dissolution Tester features a unique circular design that provides uniform water temperature while utilizing a round heating element.The Direct-Center ™ automatic centering mechanism provides hands-free positioning of the dissolution vessels and drive shafts for accurate dissolution tests with high reproducibility. All components are controlled via PC using simple keystroke operations with a user friendly graphic in…
JASCO has expanded the FTIR-4000 and 6000 Series Spectrometers with the addition of six new systems.Each compact model offers the highest signal-to-noise ratio in the industry, supreme sensitivity, and vibration-free scanning. Highly stable interferometer and AccuTrac™ DSP technologies on all instruments enable accurate mirror position and velocity tracking for optimal signal-to-noise performance. New Fourier Transform Infrare…
The LC-4000 series HPLC pumps include expansion bays that allow a simple pump module to be transformed into a powerful solvent delivery system.Accessory modules can be installed in the LC-4000 series pump for use with virtually any solvent delivery requirement. Features Upgrade and Expansion Eliminating pulsation Pump configurations Solvent Mixing Solvent Degassing Preparative and Semi-preparative pumps
The LC-4000 Series autosamplers provide a range of options to suit any sample injection requirements, from the AS-4050 entry-level model, to the AS-4250 UHPLC model or the AS-4058 preparative scale autosampler. All LC-4000 series autosamplers share the same simple maintenance features, with consumable parts such as injection ports, rotor seals, and loops accessible from the front panel for easy replacement.
The LC-4000 Series column ovens have been designed to provide excellent utility for a wide range of different user requirements.For simple requirements the stackable CO-4061 can be used with column lengths up to 200mm (or up to 300mm with an optional extension). For RHPLC and UHPLC the CO-4062 has capacity for up to six 150 mm length columns, with optional one or two internally mounted automatic switching valves for 2 or 6 co…
The Thermo Scientific™ Vanquish™ Flex Binary UHPLC system is biocompatible with a state-of-the-art binary high-pressure pump and state-of-the-art binary solvent blending. This ultra high performance liquid chromatography system shares all Vanquish values, such as a design focused on uptime, robustness and reliability. Multiple detection options as well as Thermo Scientific™ Viper™ fingertight connections throughout the system…
