Food and Beverage Products & Reviews

Pfu DNA Polymerase is a high-fidelity, thermostable enzyme of approximately 90kDa isolated from Pyrococcus furiosus. The enzyme replicates DNA at 75°C, catalyzing the polymerization of nucleotides in the 5´→3´ direction in the presence of magnesium. Pfu DNA Polymerase also possesses 3´→5´ exonuclease (proofreading) activity. Base misincorporations that may occur during polymerization are rapidly excised by this proofreading ac…

GoTaq®2-Step RT-qPCR System is a reagent system for quantitative analysis of RNA using a two-step reverse transcription-quantitative PCR (RT-qPCR) method. The first step consists of cDNA synthesis using the GoScript™ Reverse Transcription System. Optimized reagents and ultra-active, GoScript™ Reverse Transcriptase result in high-efficiency, full-length cDNA synthesis from rare and abundant targets with up to 5 µg of RNA inp…

GoTaq® Hot Start Polymerase contains the high-performance GoTaq® DNA Polymerase bound to a proprietary antibody that blocks polymerase activity. The system is supplied with a tube of 25mM MgCl2, allowing optimization of the magnesium concentration in your reactions. It is also supplied with 5X Green GoTaq® Flexi Buffer and 5X Colorless GoTaq® Flexi Buffer. The buffers contain a compound that increases sample density, so tha…

GoTaq® Hot Start Master Mixes are premixed, ready-to-use solutions containing GoTaq® Hot Start Polymerase, magnesium, dNTPs and buffer. Reactions can be set up in less than a minute at room temperature; simply add your template, water and primers. Available with either green or colorless reaction buffers, which also serve as loading buffers, allowing you to go directly from thermal cycler to gel analysis. GoTaq® Hot Start Mast…

Most flexible Multi-mode Microplate Reader for Assay Development

The DMA-80 mercury determination system can analyze any matrix (solid, liquid or gas) without any pre-treatment or chemical additions in as few as 6 minutes in full compliance with EPA method 7473. With thousands of units installed, Milestone defines the benchmark for direct mercury determination a wide range of industries: environmental, food energy, cement, cosmetics, agriculture, mining and petrochemical.

The process of fat determination in food and feed matrices is a routine analysis still relies on outdated and matrix-dependent methods which use obsolete and time-consuming technologies. The ETHOS X offers a new approach to gravimetric fat determination, moving toward a more modern, greener and more efficient approach to total fat, Fatty Acid Methyl Ester (FAME) and free fat determinations in food and feed matrices.

The SPECTROstar Omega microplate reader is a part of the BMG LABTECH’s family of readers that contain a CCD-based spectrometer for ultra-fast, full spectrum absorbance measurements.

The most sensitive microplate reader for high-throughput screening

Absorbance microplate reader from BMG LABTECH

Clean Screen® DAU Solid Phase Extraction Column is the flagship product of the forensic solid phase extraction column line. The first product of its kind in the industry, it is a mixed-mode column exhibiting both hydrophobic and cation exchange characteristics. Over 20 years of experience has shown this column to be effective on hundreds of drugs in both the acid-neutral and basic drug categories.

The Clean Screen® XCEL Solid Phase Extraction Columns are a line of sample prep phases designed to reduce the number of steps in the extraction, and therefore the amount of time and solvent necessary to complete the sample cleanup. Further advantages include reduced sample size and improved cleanliness and recovery. The Xcel I column will extract a wide array of basic drugs including benzodiazepines and opiates. The Xcel II co…

These cartridges are designed to meet large volume, real world samples. The frits and sorbent bed resist plugging, the format fits several types of manual and automated extraction systems. Various bonded phases available including C18, C8, DVB, & graphitized carbon black.

The Clean Screen® FASt column is a novel approach to improved sample preparation for LC/MS analysis. The column employs a one step process to prepare urine samples for analysis of multiple drugs and metabolites. By quickly and efficiently reducing the amount of unwanted matrix and particulates in the final sample, the analysis can proceed with less chance of matrix suppression and LC column clogging.

Clean Screen® Xcel Well Plates The Clean Screen Xcel products are a line of sample prep phases designed to reduce the number of steps in the extraction, and therefore the amount of time and solvent necessary to complete the sample cleanup. Further advantages include reduced sample size and improved cleanliness and recovery. The Xcel I well plate will extract a wide array of basic drugs including benzodiazepines and opiates.…

Positive Pressure Manifold - A simple, robust way to quickly process up to 48 samples at one time. The Positive Pressure Manifold can accommodate a multitude of column sizes and provides even flow to each position. Positive Pressure Manifold Features: All 48 positions are individually regulated to provide even pressure to each column. There are four banks of 12 positions each. The user can control flow to each of the four…

SELECTRA-SIL® Derivatizing Reagents SELECTRA-SIL® is an extensive line of derivatizing reagents manufactured by UCT at its facility in Bristol, PA. Our reagents are designed to increase molecular weight, lower boiling points, and create a more specific ion for compounds intended for gas chromatography and GC/MS. SELECTRA-SIL® Derivatizing Reagents Benefits: Improved chromatographic resolution - increased volatility - red…

Endcapped C18 - Enviro Clean SPE Cartridges Enviro-Clean® cartridges are designed for use by analysts that demand a clean, dependable and rugged product for low level environmental analyses. Our EC SPE Cartridges run the gambit of our sorbents for every configuration you require. C18, Octadecyl Hydrophobic, 1000 mg/6 mL. Part # EEC181M6

The latest addition to UCT’s QuEChERS line puts a new “spin” on dSPE. SpinFiltr™ combines the practice of conventional dSPE with the added benefit of ultrafiltration. UCT’s new format of dSPE salts paired with a 0.2µm filtration device, simultaneously removes unwanted matrix compounds and filters samples without the need for any additional steps. With traditional dSPE, analysts must pay close attention when removing t…

Spectrophotometric colorimeters with remote calibration

The Model F is a visual colorimeter designed to optimize the use of Lovibond ® glass filters in order to express color in terms of Lovibond® Red, Yellow, Blue, and Neutral. 

Original Eppendorf PCR tubes are manufactured to the highest Eppendorf quality standards. These thin-walled polypropylene tubes ensure efficient and homogeneous heat transfer in the sample thanks to the even wall thickness and smooth wall surface. Heat-sealed bags enclosed in boxes sealed with a PCR Clean sticker ensure the highest degree of purity. A frosted labeling area on the tube allows easy sample tracking

Product features Pink or light blue above 7°C, violet or dark blue when ice-cold DescriptionThe new Eppendorf PCR-Cooler maintains a sample temperature of 0°C*1 for over an hour and then changes color when the temperature has exceeded 7°C. Superior to an ice bath, PCR-Cooler is easy to handle, space-saving and free of contamination, which makes it the perfect preparation for your PCR reactions. The temperature of single tub…

Original Eppendorf PCR tubes are manufactured to the highest Eppendorf quality standards. These thin-walled polypropylene tubes ensure efficient and homogeneous heat transfer in the sample thanks to the even wall thickness and smooth wall surface. Heat-sealed bags enclosed in boxes sealed with a PCR Clean sticker ensure the highest degree of purity.

These automated pipetting systems are perfectly suited for PCR and qPCR setup, nucleic acid purification as well as low-throughput NGS library preparation yet they retain the flexibility for use as open platforms for diverse automated liquid handling applications. The epMotion 5073 series automates and simplifies traditionally complex, labor-intensive pipetting tasks, saving time and improving the reliability and reproducibili…