Search results for "flow cytometry"

On-chip protein isolation and identificationCiphergen’s ProteinChip® Biology System is a complete solution for basic proteomics research. Consisting of instrumentation, ProteinChip Arrays and software, the ProteinChip Biology System gives you the ability to quickly compare the presence and abundance of individual proteins in crude samples, characterize, isolate and identify individual proteins, investigate antibody-antigen rec…

For more demanding applications, or for situations where analysis time or sample throughput is critical, Rigaku offers the new NEX QC+ spectro­meter. Employing the next generation silicon detector technology, the enhanced NEX QC+ affords significant improvement in elemental peak resolution and counting statistics, resulting in superior calibrations and measurement precision for the most challenging measurements.Specifically d…

FAST Flame - High Throughput Automated Sample Introduction for PerkinElmer Flame AA Instruments. Flame Atomic Absorption (FAA) instruments offer extremely high throughput—often around 10 seconds per analysis—for samples requiring the determination of just one or a few elements. The FAA is easy to use, has a relatively low operating cost, and produces results that align well with historical data collected over the last 40 year…

Thermo Scientific Arktik Thermal Cycler is suitable for a wide range of applications from individual reactions to high-throughput projects. It offers flexibility with three different interchangeable blocks: 96-well block, 384-well block, and a dual block with two 48-well units. A broad temperature gradient in 96 and 384 blocks simplifies temperature optimization. Ease-of-use is the key feature of the Arktik Thermal Cycler’s us…

This Research Polarizing Microscope from Lafco is a principal piece of equipment used by the Geologists to observe the optical properties of minerals. It has indispensable applications for petrography, crystallography, geology, mineralogy, ceramics, toxicology, chemical microscopy or detecting defects in semi-conductors, finding stress points in metals, glass & textiles etc. Focusing: Coaxial focusing is provided with coars…

Lids are made of rigid polystyrene Lids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplates Lids do not fit Corning 2 µL 1536 well microplates or 2 mL 96 well storage blocks Sterilized by gamma radiation

(This is the suggested replacement for 3673) Square well top for easier robotic pipetting Round bottom for better Z factor and minimized trapped air Conical well molded in the shape of a light cone for efficiency Recommended working volume of 2 to 20 µL White walls reduce well-to-well crosstalk, enhance luminescent signals and have low background luminescence and fluorescence Nonbinding surface (NBS) is a Corning proprie…

(This is the suggested replacement for 3676) Square well top for easier robotic pipetting Round bottom for better Z factor and minimized trapped air Conical well molded in the shape of a light cone for efficiency Recommended working volume of 2 to 20 µL Black walls reduce well-to-well crosstalk and autofluorescence during fluorescent assays Nonbinding surface (NBS) is a Corning proprietary treatment technology used on po…

Has low background fluorescence and minimize light scatteringDesigned to reduce well-to-well crosstalk360 µL total volumeRecommended working volume of 75 to 200 µLConforms to standard microplate footprint and dimensionsUlta-Low attachment surface with covalently bonded hydrogel that minimizes cell attachment, protein absorption, enzyme activation and cellular activationNoncytotoxic, biologically inert and nondegradable surface…

These bottles are manufactured from low density polyethylene and are offered with a narrow or wide mouth. The cap and dispensing tube are manufactured from PP to optimize backflow of the solution. The design allows minimal turbulence of the liquid in the bottle.

These 10 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cali…

These 100 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cal…

These 200 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cal…

These 25 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cali…

These 250 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cal…

These 50 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cali…

These 500 mL Class A PYREX® volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks are cal…

Corning 1536-well microplates are our highest density microplates available for high throughput screening. The microplates conform to standard microplate footprint and dimensions. These microplates are offered in solid black and white polystyrene, with round or flat bottoms, and in black-clear bottom formats.Total well volume of 10 μL for round well microplates and 12.8 μL for flat bottom microplatesRecommended working volume…

These 100 mL PYREX® volumetric flasks are calibrated to Class A tolerances in accordance with ASTM E-542 and E-288. Supplied with No. 13 Standard Taper glass stoppers. For replacement stoppers see No. 7650. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. Tested and calibrated in an ISO/IEC 17025 certified laboratory.

The CellTiter-Glo® 3D Cell Viability Assay is a homogeneous method to determine the number of viable cells in 3D cell culture based on quantitation of the ATP present, which is a marker for the presence of metabolically active cells.   This ready-to-use reagent is based on the original CellTiter-Glo® Luminescent Cell Viability Assay chemistry and eliminates the need to combine buffer with lyophilized substrate when prepa…

The most reproducible and accurate method of determining the amount of filamentous actin (F-actin) content versus free globular-actin (G-actin) content in a cell population is to use Western blot quantitation of F-actin and G-actin cellular fractions. The general approach is to homogenize cells in F-actin stabilization buffer, followed by centrifugation to separate the F-actin from G-actin pool. The fractions are then separate…

The ÄKTA ready™ 450 chromatography system is single use and has a  low flow rate and hold-up volume for efficient purification of small quantities in a GMP environment. 

Combining superior analytical performance with class leading reliability, the 20-22 ensures that all your scientific needs are met. Backed by over 20 years of development with a no compromise approach to its engineering integrity, Sercon provides the ultimate isotope ratio mass spectrometer. This technology is available in both continuous flow 20-22 and dual inlet GEO 20-22 forms to be interfaced with our range of automated p…

Tekmar's Fusion Total Organic Carbon (TOC) Analyzer offers more flexibility, intelligence and user friendliness making this analyzer ideally suited for the most demanding laboratory needs. The Fusion Analyzer utilizes powerful UV Persulfate oxidation allowing superior carbon liberation from even the most challenging matrixes. By implementing the patent-pending Static Pressure Concentration (SPC) technology, the Fusion Total…

Combined with the Nadia Instrument, the scRNA-Seq Reagent Kit generates PCR amplified cDNA libraries for high throughput gene expression profiling of heterogenous cell populations in just 20 minutes. The kit allows researchers to achieve highly reproducible single cell data sets – with ultra-efficient gene capture rates – at low sequencing costs. The kit contains all the reagents and consumables required for the generation…