The 1260 Infinity III Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells.
The 1290 Infinity III Bio Flexible Pump is a UHPLC pump consisting of biocompatible material, designed for use in biopharma and other applications utilizing high-salt and extreme-pH conditions. It offers gradient formation from up to four solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.
Agilent high-quality copper, stainless steel, and UltiMetal Plus tubing are manufactured and cleaned for chromatographic use. Agilent Tubing comes in different lengths and depending on your flow requirements, are available in 1/16 inch, 1/8 inch, or 1/4 inch. UltiMetal Plus tubing comes in 1/16 inch for inert environments.
The CMA 110 Liquid Switch permits manual switching between up to three perfusion lines (syringes) and a microdialysis probe. This makes it possible to change different solutions instantaneously without any risk of introducing air bubbles into the microdialysis probe. • Instantly switch between syringes • Prevents introduction of air bubbles • No interruption of flow
TAP recommend their plate heater to ensure precise temperature control and optimise the production of RAFT 3D cell cultures in plates. It has been specifically designed for use in a laminar flow cabinet and can be easily sprayed and cleaned. The heater is also suitable for general lab use, eg assay incubations.
Let it flow! The new member of the Combitips advanced® family is eager to master highly viscous liquids. Even honey and other liquids with a dynamic viscosity of up to 14,000 mPa*s (e.g., glycerol 99.5 %, liquid detergents, collagen, oils, nail polish, shampoo, ointments) are not a challenge for the ViscoTip.
Replacement gaskets are available with the vacuum manifold assembly. The gasket can become worn over time and the seal between the plate and the manifold will be affected. This may result in poor vacuum pressure and negatively effect flow rates. The gasket should be checked regularly and replaced when it becomes worn.
This reagent kit comprises three spectrally distinct fluorophores that allow assessment of cytoplasm-to-cell membrane translocation of PKC alpha. This kit specifically labels nuclei (blue), cell membrane (Alexa Fluor(r) 488), and PKC alpha (Alexa Fluor 555) in mammalian cells. The kit has been validated for use on Cellomics’ ArrayScan® HCS Reader but may be applied to any imaging system. Available in Evaluation Size (Five 9…
The LH 15/1 - LF 1 0/14 laboratory furnaces have been trusted for many years as professional chamber furnaces for the laboratory. These furnaces are available with either a robust insulation of light refractory bricks (LH models) or with a combination insulation of refractory bricks in the corners and low heat storage, quickly cooling fibre material (LF models). With a wide variety of optional equipment, these models can be op…
THE COMPLETE PACKAGE - Prices Include Delivery, Installation, 2 Year Warranty and Pre-Purchase Site Inspection CFS - Co-Axial-ice System Static evaporators just cannot cope with the natural shape of flake ice. A vertical, cylindrical evaporator with an auger that extrudes ice flakes through an ice breaker proves to be the best solution, and Scotsman has perfected it through years of experience. The Scotsman solid stainless…
Efficient siRNA or microRNA transfection. To attain efficient and reliable siRNA or microRNA transfection, we offer DharmaFECT transfection reagents. Thermo Scientific DharmaFECT 1 is our most all-purpose transfection reagent formulation; demonstrating efficient, low-toxicity delivery to over 35 cell types. DharmaFECT 1 achieves effective transfection of siRNA and microRNA reagents at low concentrations and with low cytotoxic…
OPTI-SOLV® Reservoir Filters employ a unique conical design inside the filter housing to prevent air bubbles from getting trapped and disturbing your analysis. While the availability of HPLC-grade solvents diminishes the need for pre-filtering, it is still imperative that a filtration device be installed in the reservoir. Placing a filter in the reservoir is an economical way to filter particles that may result from buffer sal…
The CellCube Module is an integral, encapsulated, sterile, single-use device that is 100% pressure-hold tested before shipment. It is comprised of a series of parallel, styrene plates joined to create thin, sealed, laminar flow spaces between adjacent plates. Each culture plate receives proprietary tissue culture treatment prior to assembly to ensure dense, uniform cell growth. These CellCube Modules provide: a series of para…
Discover our Flat 1D/2D Scanner - Single Tubes, a high-quality, low-cost solution for laboratory sample management. This scanner reads both 1D and 2D barcodes with lighting-fast speed and high resolution, ensuring accurate data capture. Its plug-and-play installation makes it easy to set up, and its highly responsive design allows for seamless operation. Simply place the tube on the scanner, and the decoded value is automatic…
Your 2.3 Megapixel Microscope Camera for Fast Low Light and Live Cell Imaging.
LPI1010 is designed to accommodate the low impedance of batteries and fuel cells.
Rotary vane pumps for all applications in the low and medium vacuum range
A sensitive, DLReady certified luminescence plate reader built to perform superbly for a variety of luminescence applications, including flash, glow and BRET assays.
The 1290 Infinity II Bio High-Speed Pump is a binary UHPLC pump consisting of biocompatible material for use in biopharma and other applications utilizing high salt and extreme pH conditions. It uses high-pressure blending from up to two solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.
The 1290 Infinity III Bio High-Speed Pump is a binary UHPLC pump consisting of biocompatible material for use in biopharma and other applications utilizing high salt and extreme pH conditions. It uses high-pressure blending from up to two solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.
QuickFlowâ„¢ benchtop aspirators combine exceptional ergonomics with a broad range of features and conveniences: the ability to select continuous flow without maintaining pressure on the activator button, a liquid-level sensor to prevent overfilling and multiple adapters for most media types. Labs with central vacuum systems can purchase the handle and adapter kit separately.
Double your throughput and deepen your sample analysis using the Thermo Scientific Vanquish Duo UHPLC System for Dual LC. Features a dual split sampler and two pumps and flow paths, allowing you to run the same method or two different methods simultaneously on the same instrument, maximizing your lab productivity and return on investment.
The 1260 Infinity III Prime Analytical-Scale LC Purification System is a versatile preparative high-performance liquid chromatography (HPLC) instrument. This system offers the highest functionality and operational convenience for analytical-scale HPLC purification and entry-level quaternary UHPLC at pressures up to 800 bar and for flow rates up to 5 mL/min.
Speed up and simplify your sample preparation process with our range of instantly soluble, Â ready to use, sterile media granules. Â Pre-weighed, available in standard sample bags or sachets, Insterprep allows busy laboratories to respond quickly to work flow demands. Â Find the right Insterprep for your laboratory and cut sample processing time and waste.
The VERITY® 3240 High Pressure Binary Gradient Pump is designed for semi-preparative to preparative purification. It provides an economical and compact pumping solution for preparative purification on 10 to 50 mm ID columns thanks to its large dynamic flow range up to 150mL/min. and pressure up to 420 bar (6090 psi).
