UHPLC and HPLC > UHPLC and HPLC Pumps Products & Reviews

The 1515 Isocratic HPLC Pump is an isocratic pump that offers the same performance as the 1525 Binary HPLC Pump. It features and integrated, high-pressure binary pump with on-board pulse dampening and efficient mixing. Its pulse-free solvent flow with analytical to semi-preparative flow rates are well suited for high sensitivity detectors Designed for use with 2 to 4.6 mm I.D. columns in routine HPLC applications, the pump has…

The 1260 Infinity II Bio-Inert Pump is a quaternary UHPLC pump that is made of bio-inert material for use in biological and extreme pH applications. This pump enables gradient formation and solvent blending from up to four solvents and operates at pressures up to 600 bar and flow rates up to 10 mL/min.

The 1260 Infinity III Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min.

Liners are sealed in the inlet with O-rings or graphite seals. 

The 1290 Infinity III Flexible Pump is a quaternary pump that provides UHPLC gradient formation and solvent blending from up to four solvents. This pump enables quaternary solvent delivery at pressures up to 1300 bar and flow rates up to 5 mL/min.

The 1260 Infinity II Preparative Binary Pump is an affordable high-pressure gradient pump for LC purification. The pump offers a dynamic flow rate range from 1 to 50 mL/min at up to 420 bar, allowing workflows on columns from 9.4 to 30 mm inner diameter.

The 1290 Infinity II Bio Flexible Pump is a UHPLC pump consisting of biocompatible material, designed for use in biopharma and other applications utilizing high-salt and extreme-pH conditions. It offers gradient formation from up to four solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.

Gold plating provides enhanced inertness versus stainless steel.

The LC-4000 series HPLC pumps include expansion bays that allow a simple pump module to be transformed into a powerful solvent delivery system.Accessory modules can be installed in the LC-4000 series pump for use with virtually any solvent delivery requirement. Features Upgrade and Expansion Eliminating pulsation Pump configurations Solvent Mixing Solvent Degassing Preparative and Semi-preparative pumps

For flexibility across a broad range of analytical LC applications with the highest degree of choice in solvent proportioning and mixing, the Thermo Scientific™ UltiMate™ LPG-3400SD Standard Quaternary Pump is the pump of choice. Up to four solvents may be used for convenient method development, system flushing or solvent preparation. With support for pressures up to 62 MPa (9,000 psi/620 bar) at flow rates of up to 10mL/min.,…

Integrated FAST valve and precision micro peristaltic pump

Inlet base seals for Agilent gas chromatography.

Pneumatic Drive Pump for Hazardous Applications

OEM Dispensers & Pumps

The Chloritirol®  is the solution for accurate maintenance-free Sodium and Calcium Hypochlorite injection.   This patented technology is field tested and proven for high and low demand applications.  This unique valvelss duplex pump design includes a high pressure pump for hypochlorite injection, and a pump for gas/vapor removal, which eliminates airlock and prime loss

Analytical HPLC pump from the previous, Series 1100 Cecil HPLC range, still nice at half the price.

The 1525 and 1525 with EF heads are integrated, high-pressure, binary HPLC pumps that feature on-board pulse dampening and efficient mixing. Their pulse-free solvent flow, from analytical to semi-preparative flow rates, makes them ideal for use with highly sensitive detectors. Designed for use with 2 to 4.6 mm I.D. columns in routine LC and LC/MS applications, these pumps have a programmable flow-rate range of 0.00 to 10.00 mL…

The 2545 Quaternary Gradient Module is a four solvent, low pressure mixing gradient pump (up to 150 mL/min) that serves as a solvent delivery device for purification systems. Features: • Four solvent gradient selection • Control from MassLynx, Empower, or console allowing scale up via a familiar software interface • Interfaces to a variety of detectors and peak fraction collectors for optimum purifications • Allows UV or MS di…

DOSE IT – Smart and compact liquid handling The peristaltic pump DOSE IT makes dispensing of culture media, buffers and other solutions easy and efficient. Forget about complicated programming. The setting of all functions and parameters is self-explanatory so that, with minimal learning time, everybody can start working immediately. A broad range of dose volumes can be dispensed with high accuracy since the DOSE IT is compat…

The 515 HPLC pump is a programmable, free-standing HPLC pump available in isocratic, gradient, and semi-preparative configurations: • Precise stepper motor control (48 steps/µL resolution) of dual reciprocating pistons • Non-circular drive gears provide smooth, uniform eluent delivery • User-programmable flow rate calibration and compressibility compensation factors ensure straightforward pump operation qualification • Tests t…

Flexible and precise sample transfer   The flexible, bi-directional Peristaltic Pump is specifically designed to be used in dissolution sample transfer, even allowing the use of surfactants without excessive foaming. It has a 16-channel maximum capacity for sample transfer with the Agilent 8000 Dissolution Sampling System. The peristaltic pumping system incorporates an 8-roller design for smooth flow.

The 1260 Infinity II Preparative Binary Pump is an affordable high-pressure gradient pump for LC purification. The pump offers a dynamic flow rate range from 1 to 50 mL/min at up to 420 bar, allowing workflows on columns from 9.4 to 30 mm inner diameter.

Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal to noise ration, increase column bleed, and even shorten column lifetime. Using a patent pending manufacturing process, our inlet gold seals eliminate tiny leaks from machining that can negatively impact your GC performance.

Agilent feedthroughs provide reliable, leak-free performance in high and ultra-high vacuum systems. Large, sturdy ceramic-to-metal seals assure maximum strength and dependable service over an extremely wide range of vacuum applications.

The 1290 Infinity III High Speed Pump uses high-pressure mixing for UHPLC gradient formation and solvent blending from up to two solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.