Flash Chromatography > Chromatography Glassware Products & Reviews

YMC HT Glass Columns are specially designed to accommodate the stringent requirements of high-temperature liquid chromatography applications. Capable of performing efficiently at temperatures up to 70 °C, these columns are perfectly suited for a broad spectrum of purification tasks, particularly in biochemical liquid chromatography (BioLC), where high temperatures are pivotal.

From laboratory to pilot scale, YMC offers reliable, high quality glass columns for all kind of application areas.

YMC PilotPLUS columns are completely biocompatible and characterised by safe and easy handling.

Does your application require customised pilot columns? With YMC Pilot columns, customised versions can be constructed to address your needs. Of course standard dimensions are available, too!

Reservoir at top with product standard 2 mm bore PTFE plug.

Reservoir at top with product standard 2 mm bore PTFE plug.

These PYREX chromatography reservoirs have a central cavity for a mobile phase inlet reservoir, an autoclavable plastic coat that absorbs UV up to 385nm, and a GL-45 thread finish. These may be used with our 3-hole cap #1395-3H.

This PYREX chromatography reservoirs has a central cavity for a mobile phase inlet reservoir, an autoclavable plastic coat that absorbs UV up to 385nm, and a GL-45 thread finish. This may be used with our 3-hole capCat. No. 1395-3H.

These PYREX chromatography reservoirs have a central cavity for a mobile phase inlet reservoir, an autoclavable plastic coat that absorbs UV up to 385nm, and a GL-45 thread finish. These may be used with our 3-hole cap #1395-3H.

These PYREX chromatography reservoirs have a central cavity for a mobile phase inlet reservoir, an autoclavable plastic coat that absorbs UV up to 385nm, and a GL-45 thread finish. These may be used with our 3-hole cap #1395-3H.

These 125 mL PYREX® atomizers are used for spraying reagents onto thin layer chromatography plates. They have a full length 24/40 Standard Taper joint between the reservoir and spraying device.

These 250 mL PYREX® atomizers are used for spraying reagents onto thin layer chromatography plates. They have a full length 24/40 Standard Taper joint between the reservoir and spraying device.

These tubes are designed for general chromatographic analysis. The tops are tooled for rubber stopper fit and the tubes are fabricated with sealed-in coarse porosity fritted discs. The outflow tubes are large in diameter to eliminate the smearing of the definition bands of effluent caused by the tube being filled, and the solvent mixed before being expelled. The outflow tubes are long enough to protrude through a rubber stoppe…

These tubes are designed for general chromatographic analysis. The tops are tooled for rubber stopper fit and the tubes are fabricated with sealed-in coarse porosity fritted discs. The outflow tubes are large in diameter to eliminate the smearing of the definition bands of effluent caused by the tube being filled, and the solvent mixed before being expelled. The outflow tubes are long enough to protrude through a rubber stoppe…

These tubes are designed for general chromatographic analysis. The tops are tooled for rubber stopper fit and the tubes are fabricated with sealed-in coarse porosity fritted discs. The outflow tubes are large in diameter to eliminate the smearing of the definition bands of effluent caused by the tube being filled, and the solvent mixed before being expelled. The outflow tubes are long enough to protrude through a rubber stoppe…

The 10x300mm PYREX® column is designed for general chromatographic column separations. The top is tooled for a No. 00 rubber stopper fit. A PTFE (Polytetrafluorethylene) Product Standard stopcock with a No. 2 plug is provided for better column control. Sealed into the column in a coarse porosity (40 to 60 µm) fritted disc. The volume below the disc is minimized to prevent mixing and to allow clear, sharp, band definition. For…

These 11.4L PYREX® rectangular chromatography tanks are ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25mm. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.

These 3.8L PYREX® rectangular chromatography tanks are ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25mm. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.

These 13.2L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.25mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.

These 36L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.25mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.

These 6.6L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.1mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.