Products & Reviews

81-place polypropylene storage box with fixed, 9x9 dividers for tubes up to 13mm, eg. 1.5/2.0 ml microcentrifuge tubes or screw cap microtubes.

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titration. 

High-end titrator for potentiometric titration with two measuring interfaces and internal buret drive.

Automatic system for potentiometric titration of COD samples in series up to 21 samples. The titration is carried out directly in the reaction vessel on the rack. Afterwards, the electrode is cleaned automatically by means of the membrane pumps built into the sample changer and the reaction vessel is emptied. The control of this system is handled by the user-friendly tiamo™ titration software.

Long-term volumetric imaging of living cells

The 2060 Process Analyzer is an online wet chemistry analyzer that is suitable for countless applications. This process analyzer offers a new modularity concept consisting of a central platform, which is called a basic cabinet.

The Odyssey M is the most versatile and sophisticated biomolecular imager on the market. With 19 available channels, industry-leading 5 µm resolution, >6 logs of dynamic range, and an onboard luminescence module, the Odyssey M gives researchers a multimodal imaging solution with unparalleled capabilities and performance. Discover more with the groundbreaking Odyssey technology cited in over 40,000 peer-reviewed publications.

High-end titrator for up to four 800 Dosino dispensing systems. Dynamic (DET) and monotonic (MET) titration, endpoint titration (SET), measurements with ion-selective electrodes (MEAS CONC), dosing functions with monitoring (DOS), liquid handling. With four MSB connections, one galvanically separate measuring interface, USB connection.

Volumetric Karl Fischer titration is the gold standard in QC labs when it comes to moisture determination in samples such as petrochemicals or paints: It is highly sensitive, simple, and fast. But most analysis instruments are costly.

High-end titrator for potentiometric and volumetric Karl Fischer titration with two measuring interfaces and Dosino dosing units.

4 Channel Peristaltic Pump to be used in FIA Systems

The entry-level member of the modular Autolab instruments family, the PGSTAT128N is a low current, low noise, and fast potentiostat/galvanostat capable of measuring a maximum of 800 mA, with a compliance voltage of 12 V. The PGSTAT128N is a high-performance low-cost option for electrochemical measurements in small cells.

Your High-performance Slide Scanner for Fluorescence, Brightfield and Polarization

CosMx® Spatial Molecular Imager unlocks whole-transcriptome biology at single-cell, subcellular resolution. As the first and only high-plex in situ imaging platform to detect the whole transcriptome, CosMx delivers same-cell spatial multiomics with simultaneous RNA and up to 72 protein detection in a single tissue section.

The series of OptiLab² & OptiPrep² are designed for the production of 5 L/min or 8 L/min ultra-pure water out of pretreated water by reversed osmosis or EDI².

for molecular biology, ≥99%.

Combined pH electrode with flexible easyClean diaphragm and fixed cable (1.2 m) for all non-aqueous acid/base titrations. The glass membrane is optimized for poorly conducting solutions, and thanks to the easy-to-clean easyClean diaphragm, the electrode is also well suited for heavily contaminated samples, such as used oil. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammo…

Silver/silver chloride reference electrode with Double-Junction System, installation length 10 cm. The standard ground-joint 14/15 enables easy assembly, and the flexible ground-joint diaphragm, which is insensitive to contamination, can be replaced at any time. The reference electrolyte and the bridge electrolyte can be selected freely according to use, and are easy to replace. This sensor is supplied without electrolyte fil…

Measure a variety of sample types, such as granules, powders, liquids, slurries, or opalescent substances, among others.

μStat-i 400s is a portable Potentiostat/Galvanostat/Impedance Analyzer (EIS) that can be applied for Voltammetric, Amperometric, Potentiometric and EIS measurements. Li-ion Battery powered, it can be easily connected to a PC via USB and Bluetooth®.

MIRA XTR DS handheld Raman spectrometer 

In addition to pH, voltage, and temperature measurement, the 780 pH Meter also offers an automatic stirrer control, a multi-point calibration with up to nine buffers, a method memory, and various monitoring functions. 

Advanced Reconstruction Toolbox (ART) is a collection of state-of-the-art reconstruction technologies for ZEISS X-ray microscopes or microCTs. ART leverages AI and a deep understanding of both X-ray physics and customer applications to solve some of the hardest imaging challenges in new and innovative ways. These optional modules are workstation-based solutions that provide easy access and usability. 

Multichannel bipotentiostat, galvanostat and impedance analyzer (with MultiplEIS® technology) for multi-user and multidisciplinary electrochemical research.

Indicator electrode for Karl Fischer titration which, thanks to its two fused platinum rings, is more robust and easier to clean than the conventional platinum pin electrode (6.0338.100).