Environmental Monitoring and Testing Products & Reviews

Powerful Heavy Metal Detection in Soil and Water

Heavy Metal Analyzer for Soil and Powders

A solution for the measurement of turbidity in liquids, the HazeQC ME turbidity measuring module, is provided by Anton Paar as part of a modular measuring system. The approved ratio method with measurement at three angles (transmission 0°, scattered light at 25° and 90°) is used to prevent the influence of particle size on the turbidity value. The measurement is carried out at a wavelength of 650 nm ±30 nm (MEBAK- and EBC-comp…

The FLIR GF620 is the first high-resolution, handheld camera from FLIR to detect methane and other volatile organic compound (VOC) emissions. With its ground-breaking 640 x 480 resolution IR detector, inspectors can check thousands of components and safely scan for gases from greater distances. It's also the first FLIR OGI camera to offer Quantification mode (Q-Mode) for streamlined set-up of the optional QL320 gas quantificat…

Designed and engineered for geotechnical laboratories to deliver new levels of efficiency in testing procedures. The one-dimensional consolidation test is the most common, and sometimes referred to as the oedometer or incremental loading oedometer test. Radially constrained samples are loaded in a sequence starting with a stress close to the over burden pressure of the sample. The loading is then doubled for each stage;…

The advantage of ductless on a traditional fume hood structure with lower operating and energy costs.

Multi-component calibration gas mixtures in accordance with ISO17025 standards for environmental monitoring.

Serum-free methylcellulose-based medium with recombinant cytokines for human ES and iPS cell-derived cells

Less than 1ppm of CO2 and free of TOC is delivered as required

Maximum performance with a minimal footprint

Precise S and N determination at very low concentrations  

TOC/TNb analysis without limitations  

Phytocannabinoid Mixture 11 (CRM) (1 ml,  250 µg/ml) (Item No. 21306) is a certified reference material mixture provided as a DEA exempt preparation. Included are Δ9-THC, Δ8-THC, tetrahydrocannabinolic acid A, cannabinol, cannabidiol, cannabidiolic acid, (±)-cannabichromene, cannabigerol, cannabigerolic acid, cannabidivarin, and tetrahydrocannabivarin. It is supplied in an amber ampule in which the headspace has been purged w…

Phytocannabinoid mixture 10 (CRM) (Item No. 21305) is a certified reference material mixture containing tetrahydrocannabinols, which are regulated as Schedule I compounds in the US. Included are Δ9-THC, Δ8-THC, tetrahydrocannabinolic acid A, cannabinol, cannabidiol, cannabidiolic acid, (±)-cannabichromene, cannabigerol, cannabigerolic acid, and cannabidivarin. It is supplied in an amber ampule in which the headspace has been…

Phytocannabinoid Mixture 6 (CRM) (Item No. 25077) is a certified reference material mixture provided as a DEA exempt preparation. Included are Δ9-THC, THCA-A, cannabidiol, cannabidiolic acid, cannabinol, and cannabigerol. The mixture is supplied in an amber ampule in which the headspace has been purged with argon.

Phytocannabinoid Mixture 5 (CRM) (Item No. 25076) is a certified reference material mixture provided as a DEA exempt preparation. Included are Δ9-THC, THCA-A, cannabidiol, cannabidiolic acid, and cannabinol. The mixture is supplied in an amber ampule in which the headspace has been purged with argon. 

Mycotoxin Mixture 5 (CRM) (Item No. 28151) is a certified reference material secondary standard mixture that contains mycotoxins produced by fungi that have been found in Cannabis samples and cultivation materials. Included are aflatoxin B1, B2, G1, G2, and ochratoxin A. The mixture is supplied in an amber ampule in which the headspace has been purged with argon. 

THCA-A (CRM) (Item No. ISO60175) is a certified reference material that is structurally categorized as a cannabinoid. THCA-A is a phytocannabinoid that is a common component of hashish. There are two acid isomers of Δ9-THC, THCA-A and THCA-B. In THCA-A, the carboxylic acid group is found at the 2 position. Neither THCA-A nor THCA-B is psychoactive, although both forms are decarboxylated upon heating to form the active Δ9-THC.…

Tetrahydrocannabivarinic acid (CRM) (Item No. 21259) is a certified reference material categorized as a phytocannabinoid. Tetrahydrocannabivarinic acid has been found in strains of Cannabis and is a precursor in the biosynthesis of tetrahydrocannabivarin. Tetrahydrocannabivarinic acid (CRM) is provided as a DEA exempt preparation. This product is intended for research and forensic applications.

Inexpensive portable devices and test kits for quantitative on-the-spot analysis with easy handling with the precision of instrumental analysis

Save time and get quick and reliable results in food, water and environmental analysis procedures

Get instant high-quality results in environmental analysis and industrial-in-process controls

Analyze your MQuant® test strips with your smartphone for fast, convenient, and precise results

The CN 802 combustion elemental analyzer is a versatile, cloud-enabled and fully automatic solution for carbon and nitrogen determination for a wide range of applications. The CN 802 offers high performance on both solid and liquid samples, working following international standards such as AOAC, AACC, ASBC, ISO, DIN, IFFO, OIV, ASTM, EPA.

Phytocannabinoid Mixture 8 (CRM) (Item No. 34043) is a certified reference material mixture that contains neutral, non-acid, forms of compounds that can be isolated from plants in the genus Cannabis.  Included are Δ9-THC, Δ8-THC, cannabinol, cannabidiol, (±)-cannabichromene, cannabidivarin, cannabigerol, and tetrahydrocannabivarin. It is provided as a DEA exempt preparation in an amber ampule in which the headspace has been p…