Sample preparation can improve the quality and speed of separation techniques. Products to assist sample preparation include filtration equipment, evaporators, membranes and sieves.
Application The MagNA Pure LC Cooling Block, Reaction Tubes, is used for placing thirty-two 1.5 ml reaction tubes, with screw caps, on the stage of the MagNA Pure LC Instrument. This Cooling Block can be combined with either the MagNA Pure LC Cooling Block, LC Centrifuge Adapters, or 96-well PCR Plate. The stage of the MagNA Pure LC Instrument includes a cooling area that is designed for various post-elution pipetting proces…
Application The MagNA Pure LC Cooling Block, A-Ring holds one or two A-Rings with bar codes. Application of the corresponding Post Elution Module of the MagNA Pure LC Software results in automatic filling of the A-Rings with purified nucleic acids and compatible PCR reagents, which are also positioned on the Cooling Block. The A-Rings are then ready to be transferred to an instrument platform for testing. The stage of th…
The MagNA Pure LC Barcode Reader Quick Scan 1000 enables sample identification and tracking during the entire MagNA Pure LC purification run. It reads the bar code on primary tubes, as well as bar codes generated by the MagNA Pure LC Barcode Printer TLP 2844 (Cat. No. 03 576 094 001) for the MagNA Pure LC Sample Cartridges or Cooling Blocks.
The MagNA Pure LC Barcode Printer TLP 2844 facilitates sample identification, tracking, and documentation during MagNA Pure LC purification runs. It enables the user to print bar codes created by the MagNA Pure LC Software Version 3.0 for the MagNA Pure LC Sample Cartridges and/or non-barcode-labeled primary tubes. The MagNA Pure LC Barcode Labels (available separately, Cat. No. 03 531 520 001) are suitable for the new bar-cod…
The MagNA Pure LC Barcode Labels are designed for use with the MagNA Pure LC Barcode Printer TLP 2844 (Cat. No. 03 576 094 001). The labels are suitable for the new bar-code labeling area of the MagNA Pure LC Sample Cartridge.
The MagNA Pure LC Bar code Printer Ribbon is designed for use with the MagNA Pure LC Barcode Printer TLP 2844 (Cat. No. 03 576 094 001).
These Costar® Spin-X® centrifuge tube filters have a 0.22 µm pore CA membrane-containing filter unit within a 500 µL capacity polypropylene microcentrifuge tube. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding Ideal for removing bacteria, particles, or cells from liquids, HPLC sample preparation and DNA removal from agarose or acrylamide gels. Nonsterile and certified nonpyrogenic and DNase-…
These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets. Surfactant-free cellulose acetate (SFCA) membranes provide the lowest protein binding 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Fits plastic or glass media bottles with 45mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…
These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Fits plastic or glass media bottles with 45mm neck sizes. Nylon (NY) membranes are naturally hydrophilic, surfactant-free and offer the lowest extractables. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy product identification. Expiratio…
The Pippin Link Group Control is the best way to reproducibly provide the highest quality size-selected DNA in high-throughput. It provides hardware and software for running up to eight Pippin Instruments from a laptop PC. Three linked-Pippins can produce up to 96 size selections in one day.
Gerhardt has created a complete line of Soxtherm models, creating the ideal opportunity to have a state of the art lab for Extraction systems. One of the most impressive units in the line is the Soxtherm 416, capable of six extraction places capable of holding both small and large beakers. The unit is capable of nearly all analytical areas in fat determination and sample preparation specifically: milk, cereal, meat, oil, fruit…
Disposable cuvettes for spectrophotometry, optical PS visible range cuvettes, UV Grade PMMA cuvettes. Standard and semi-micro disposable cuvettes for spectroscopy made of optical PS and PMMA UV grade optical windows to achieve optimal transmittance through spectral range from 340 to 800 nm (OPS) an from 280 to 800 nm (PMMA UV qrade). The engineering and quality control determine the reproducibility of the cuvettes. These are s…
Rocket 4D Synergy is designed primarily to evaporate large sample volumes, with autofeed if required, allowing automatic evaporation of volumes up to 100 litres. Rocket 4D Synergy provides fast, safe evaporation for solvents with a boiling point of up to 165°C (DMF) and can easily dry aqueous samples. The system feeds the solution for evaporation to the evaporation vessel, controls temperature and pressure, prevents bumping…
High-Purity Acids, Always fresh to hand thanks to Subboiling. As rule, chemical prices increase exponentially as the chemical’s purity increases. Therefore, even where annual consumption is apparently minimal, high-purity acids can quickly become a significant cost factor for trace analysis laboratories. These costs can be avoided by the employment of a subboiling apparatus to produce high-purity acids from more economical…
Fits plastic or glass media bottles with 33mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…
The miVac Duo Concentrator is suitable for use with a wide range of solvents, from volatile organic solvents through to water and some of the higher boiling point solvents. The Duo is a centrifugal vacuum concentrator compatable for use with variety of sample formats including tubes, microplates, vials and round bottom flasks. Making it an ideal "work-horse" concentrator for the busy lab. Combined with a SpeedTrap and JetRo…
The demand for a more powerful and colder condenser has naturally arisen as the boundaries of evaporation science are pushed further and further. Users increasingly regard as critical the importance of having the right condenser for the job, with the correct power and temperature profile matched to the characteristics of the evaporator. Genevac has developed the super-powerful and super-cold SuperCool 75, in collaboration wit…
Solid Phase Extraction (SPE) is the basis of analytical laboratories. A crucial step of this process is sample preparation. Therefore we know that a clean sample will yield better results. To achieve this goal SiliCycle has designed SiliaPrep, which is a silica based sorbent exempt of fines, and SiliaPrepX, polymeric based sorbent, that can be found in cartridges, well plates and SPME (Solid Phase Micro-Extraction) cartridges…
The MiniBlock® is an easy-to-use reaction block designed for parallel synthesis and screening. Its unique valve body design enables processes where filtration is critical, including solid-phase organic synthesis, use of scavenger resins with solution phase synthesis and parallel purification via Solid-Phase Extraction (SPE).Make the choice many chemists have made to increase productivity, more so than any other similar tool.…
WIN IN EFFICIENCY, AUTOMATION, SPEED & SAFETY WITH OUR NEW SAMPLE PREPARATION DEVICES HORIBA Scientific offers a great range of possible solutions for our analyzers, to save time and ensure that the end results are as accurate as possible! Whatever your analytical solutions: ICP-OES, ICP-MS, AA, Fluorescence X, elemental analyzers, etc.… HORIBA Scientific can provide you with many sample preparation devices, such as: • Grinder…
HT4000A is a sample preparation workstation that allows automation of sample preparation procedures by taking care of a large number of operations such as liquid handling, purification or filtration (including Solid Phase Extraction (SPE), Micro Extraction by Packed Sorbent (MEPS), Whatman® Mini-UniPrep® syringeless vials, syringe-filters and liquid/liquid extraction (LLE)), tracking and further sample processing such as vorte…
A new generation of SPME products.The Fast Fit Fiber Assemblies were developed by Chromline srl Prato Italy in cooperation with Supelco expanding the applicability of SPME for rapid sampling and analysis using multiple fiber assemblies. This product line is centered around the barcoded SPME Fast Fit Assemblies that can be automatically exchanged on a CTC CombiPAL type autosampler equipped with the Multi Fiber EXchanger (MFX) s…
The SPME-LC fiber probes are intended as single-use devices for the extraction of small molecules out of a fluid followed by solvent desorption and LC analysis.Traditional solid phase microextraction (SPME) fibers were developed with common GC type phases, which were primarily designed for extraction of volatile or semi-volatile compounds using thermal desorption as the means of introducing sample into the chromatographic colu…
