Separations Products & Reviews

Whether you need to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color-coded, so it is easy to identify and replace correctly. Tubing is precision cut, resulting in clean, square-cut ends without ovality.

Extend column lifetime. Excellent inertness—obtain lower detection limits for active compounds. Sharper chromatographic peaks by utilizing retention gap technology. Maximum temperature: 360 °C.

3-IN-1 TECHNOLOGY with Rxi® columns: • Highest Inertness • Lowest Bleed • Exceptional ReproducibilityRxi® columns are more stable at high temperatures than any other manufacturer’s column, resulting in higher system sensitivity. This low-bleed characteristic is the result of superior stabilization achieved by optimizing polymer cross-linking and surface deactivation technologies. Benefits of using ultra-low bleed Rxi® column…

Particle size analysis from 20 µm to 25 mm.

Chamber designed to separate analytes using optimized parameters (activation and preconditioning of the HPTLC glass plate (20 x 10 cm) before, conditioning during, and drying after development).

BUCHI Labortechnik is the first supplier of a fully controlled rotary evaporation system. All instruments in the system: Rotavapor®, vacuum pump, vacuum controller and recirculating chiller communicate with each other. A perfect combination for optimized, environmental friendly and cost saving distillation. Easy handling with a high safety standard With the enhanced functions of the vacuum controller, it is possible to control…

Highly efficient rotary evaporation of multiple samples

Best performance at maximal safety levels

Powered by Adaptive Focused Acoustics ® (AFA ® ) Technology

The FastPrep-24™ 5G Instrument is quite simply the most advanced sample preparation system ever!   The only high-speed benchtop homogenizer featuring microprocessor-controlled, Hi-Def Touch Screen Programming makes the 5G the ultimate in ease, speed and performance for sample preparation applications where it is necessary to grind, lyse, or homogenize difficult and routine samples, allowing easy and reproducible isolatio…

ISOLUTE SLE+ Supported Liquid Extraction plates and columns offer an efficient alternative to traditional liquid-liquid extraction (LLE) for bioanalytical sample preparation, extracting up to 400 µL aqueous sample.

Isolera, a compact flash purification system with intelligent features, enables chemists to easily achieve better separations. The patented TLC-to-gradient feature automatically creates elution gradients and suggests cartridge and sample size. Collect fractions using two wavelengths, adjust the flow rate from 1 to 200 mL/min as needed and use up to four solvents in a single gradient, for maximum purity and yield.

PhyTip® Columns offer automated, flexible and scalable solution for biomolecule separation. The PhyTip® technology platform enables chromatography using automated bench top platforms (for up to 12 samples in parallel) and robotic liquid handling systems (for up to 96 samples in parallel). The unique design of the PhyTip® affinity columns allows bidirectional flow of the sample through the column to maximize the use of the resi…

Previously known as SPE-DEX ® 3100

Previously known as SolventTrapOG Automated Solvent Recovery System

Previously known as SPE-DEX ® 5000

When purifying molecules, maximizing efficiency is critical to daily work.  The Biotage®  Selekt is a lean and compact automated flash system with two column channels, allowing you to run two separations in one instrument.  Users can easily switch between normal and reverse phase with the system automatically flushing the solvent lines for you! 

The Biotage Isolera™ LS development-scale flash purification system dramatically shortens large-scale purification run-times with flow rates of 50-500 mL/minute. Simply select or create a method, load your sample, and run – it’s that easy. New advanced features include: the ability to collect fractions on two separate wavelengths, use of up to four solvents in a single gradient and add a third isocratic co-solvent.

Previously known as DryVap ® Automated In-Line Drying and Concentration System  

QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) is a sample extraction and clean-up technique used for the analysis of multiple pesticide residues in agricultural products. UCT manufactures a wide variety of pre-filled tubes and reagent pouches for all QuEChERS method variations including PSA, C18, buffers, anh. MgSO4, NaCl, ChloroFiltr, and carbon.

The FASt Well Plate is a novel approach to improved sample preparation for LC/MS analysis. The well plate employs a one step process to prepare urine samples for analysis of multiple drugs and metabolites. By quickly and efficiently reducing the amount of unwanted matrix and particulates in the final sample, the analysis can proceed with less chance of matrix suppression and LC column clogging.

High purity, Type B, spherical silica support. 100A pore size. 1.8um, 3um, & 5um partical sizes. Variety of stationary phases.

Silica-based columns are stable and efficient but unsuitable for alkaline analyses due to the silica matrix's weakness under high pH. InertSustain C18, with its novel surface-modified silica, overcomes this limitation. It retains Inertsil's benefits—low back pressure, superior inertness, high efficiency, consistent performance, and wide solvent compatibility—while enabling analyses over a broad pH range.

The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer easily achieves the ultra-trace mercury detection limit of The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The M-7600 is designed for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any aqueous acidified sample. The QuickTrace…

TSKgel Amide-80 and TSKgel NH2-100 HILIC columns from Tosoh Bioscience are first class columns when it comes to separations of hydrophilic compounds like peptides, carbohydrates, polar natural substances, amino acids, oligonucleotides, organic polar acids and bases, even proteins.