Separations Products & Reviews

Labnet's Revolver accepts a variety of tube sizes and mixes them horizontally, vertically, or any position in between. Changing the mixing angle is easy, simply turn the rotisserie. No tools are required. Interchangeable rotisseries accept tubes from 1.5 ml to 50 ml. Each rotisserie is split into two halves. Each of the halves can be exchanged to mix more than one tube type at the same time. Each rotisserie half can be rotated…

Designed for processing volumes up to 150 litres • Fluorodyne II membrane is a hydrophilic polyvinylidene fluoride (PVDF) that offers higher flow rates with low protein and preservative binding, with broad chemical and temperature resistance.

Laser particle sizing at the push of a button: 10 nm – 2100 µm

Automated high-throughput tissue homogenizer and cell lyser

Built for fast reliable gas analysis. Integrated micro chip technology combined with narrow bore capillary GC columns result in a higher performance for lower costs. The C2V-200 micro GC is designed for ease of use, reduced maintenance, and low gas consumption. Our exchangeable column cartridges, with integrated heating zones, can be easily installed. Analysis in Seconds The integrated micro chip injector ensures precise injec…

Transform standard procedures into ultimate performance.

The 2489 UV/Visible Detector is a versatile, dual-wavelength absorbance detector for HPLC. This detector offers the high sensitivity required for routine UV-based applications to low-level impurity identification and quantitative analysis. The 2489 UV/Visible detector’s extended linear range of 2.5 AU makes for easy quantitation of both major and minor components in the same run. You can also simultaneously monitor absorbance…

MEPS (patent pending) performs the same function as SPE, namely the purification or speciation of samples, but with some significant differences: MEPS works with much smaller samples (as small as 10µL) than full scale SPE MEPS can be fully automated – the sample processing, extraction and injection steps are performed on-line using the same syringe MEPS is applicable to GC and LC Significantly reduces the volume of solvents an…

The 2998 Photodiode Array (PDA) Detector offers advanced optical detection for Waters analytical HPLC, preparative HPLC, or LC/MS system solutions. Providing unprecedented trace impurity detection and quantitation, the 2998 PDA Detector’s integrated software and optics innovations deliver high chromatographic and spectral sensitivity. Enhanced software control provides flexibility for simultaneous 2D and 3D operation with eith…

A premium inert range of HPLC columns delivering optimal peak shape. The ProteCol™ range of HPLC columns feature proprietary column designs, incorporating inert materials throughout the flow path and the highest quality stationary phases. The combination of these factors delivers unparalleled separation performance. ProteCol™-P features a PEEK™ lining while ProteCol™-G uses a glass lining. Benefits of an inert flow path are: •…

Introducing Waters ACQUITY CSH and XSelect Columns - Powered by CSH Technology Waters patent-pending, Charged Surface Hybrid (CSH™) Technology powers the new Waters ACQUITY CSH and XSelect Column families.CSH Technology columns offer separation scientists a wider range of selectivities and greater performance in LC/MS-compatible mobile phases. Waters CSH Technology empowers UPLCand HPLC systems to provide separations with:Wide…

SilTite™ FingerTite is the next generation ferrule system for gas chromatography systems delivering an easy, leak free installation for capillary columns without the use of any tools. Who will benefit from this product? If you are running a capillary column equipped gas chromatography system, SilTite™ FingerTite will simplify your column installation process giving you less hassle and more time for chromatography. GCMS usersSi…

The MultiPurpose Sampler MPS is a multifunctional autosampler and sample preparation robot for GC (GC/MS), LC (LC/MS) and standalone operation. Sample preparation steps are performed during the analysis of the preceding sample for best system utilization and highest sample throughput. Sample preparation steps are performed in a controlled and highly accurate and reproducible manner for best possible results. Every step is se…

The Empower Chromatography Data System is Waters’ compliance-ready chromatography data software (CDS) for advanced data acquisition, processing, and reporting that simplifies the management of chromatography test results.

While some systems on the market offer users a choice between acquisition speed or resolution, the Pegasus GC-HRT provides scientists with an unprecedented combination of speed, resolution, mass accuracy, isotopic abundance, and dynamic range. This instrumentation utilizes LECO's own Folded Flight Path™ (FFP™) technology to allow users to achieve resolutions of up to 50,000. LECO's exclusive ChromaTOF-HRT™ software with Automa…

Strata-X Drug B and N Solid Phase Extraction (SPE) sorbents are designed and quality control tested for basic and neutral drugs of abuse analysis, respectively. The sorbents are QC tested using drug probes from urine samples so that you can have confidence in your results. The sorbents also do not require conditioning/equilibrating steps, saving both time and solvent.

Particle size analysis from 20 µm to 25 mm.

The Prominence Ion Chromatograph with built-in electrodialytic suppressor boasts the same low carryover and excellent injection precision characteristics of Shimadzu HPLCs to bring you highly reliable results. 

DOSE IT – Smart and compact liquid handling The peristaltic pump DOSE IT makes dispensing of culture media, buffers and other solutions easy and efficient. Forget about complicated programming. The setting of all functions and parameters is self-explanatory so that, with minimal learning time, everybody can start working immediately. A broad range of dose volumes can be dispensed with high accuracy since the DOSE IT is compat…

The 1260 Infinity III Prime LC System is an analytical ultrahigh-performance liquid chromatography instrument. It operates at high pressures and can handle flow rates up to 5 mL/min for using UHPLC columns packed with sub-2 μm particles. This HPLC/UHPLC system gives you the utmost confidence in your HPLC results and is a perfect front end for your LC/MS system.

Greater data quality and enhanced analysis   Using the Cary 50 Spectrophotometer with powerful Xenon pulse lamp and in situ fiber-optic probes, you can instantaneously scan and read dissolution measurements. The Agilent Fiber-Optic UV Dissolution System offers versatility and flexibility while delivering the highest level of automation and data integration for all of your UV dissolution needs. The system uses the award-winnin…

Agilent J&W DB-1ht delivers excellent performance in a range of GC/MS applications and are manufactured to the highest levels of quality and stability. Nonpolar DB-1ht columns are specially processed for operation up to 400 °C, with optimized, polyimide-coated fused silica tubing. 

Agilent J&W HP-1ms is a high quality, 100% dimethylpolysiloxane, nonpolar phase with identical selectivity to HP-1. HP-1ms are excellent general purpose columns, with low-bleed characteristics and improved signal-to-noise ratios.

Agilent J&W DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points.

Agilent J&W DB-1 is non-polar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications.