Life Sciences Products & Reviews

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 384-well plates. AlumaSeal 384TM sealing films have one end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 137.3 mm x 82.5 mm (including single 13.5 mm end tab).Features:heat & cold resistant, recommended for temperatures from -80 °C to +120 °Ccertified DNase-, RNase-, and nucleic-acid-free

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 96-well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96TM sealing films have one partial-width end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 127.0 mm x 77.8 mm (including single 9.5 mm end tab).Features:fits inside rim of raised-rim plateheat & cold resistant, recommended…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

Bolt on Evaporative Light-Scattering Detector for flash chromatography. Effortless and robust detection of compounds lacking chromophores compatible with all Biotage® Selekt family members.

Biotage® VacMaster™ Sample Processing Manifolds allow samples to be processed simultaneously under vacuum. Easy-to-use vacuum controls provide excellent sample flow control, leading to reproducible, reliable extraction conditions.

The Biotage® Oligo SPE solid-phase extraction solution for bioanalysis of therapeutic oligonucleotides. Developed for efficient extraction of oligonucleotide-based therapeutics from biological samples, including plasma, serum, urine and tissue homogenates.

EVOLUTE® PFAS SPE columns deliver high, reproducible recoveries of PFAS analytes with high-purity WAX sorbent and low-background components to prevent contamination. Available in 50 µm and 30 µm formats for compliance with ISO and EPA 533 methods, they are ideal for both manual and automated workflows.

Lyse or homogenize the toughest samples in seconds. Biotage® Lysera is an advanced, easy-to-use bead mill homogenizer designed for rapid, efficient grinding, lysing, and homogenizing of diverse biological samples. With a compact front-loading design, 99 programmable settings, temperature monitoring, and a wide range of accessories, it delivers reproducible results for any sample type without downtime between runs.

Biotage® Lysera is an advanced automated bead mill for rapid homogenization and liquid extraction in food and environmental testing. Featuring a space-saving front-loading design, 99 programmable settings, temperature monitoring, and versatile bead kits, it efficiently processes diverse sample types and sizes without cool-down, ensuring reproducible, high-yield results.

Biotage® Extrahera™ Peptide automates sample workup with precision and ease. Designed for synthetic labs, it enables automated solid phase extraction (SPE) and catch-and-release purification of up to 96 samples simultaneously. Positive pressure processing and complementary consumables ensure consistent, high-purity peptide samples free of catalysts and excess reagents.

The Biotage® PhyPrep is the industry’s first fully automated solution for large-scale plasmid DNA purification (Maxiprep, Megaprep, and Gigaprep). By automating the entire process from cell pellet to purified, concentrated DNA, it eliminates the manual bottlenecks of traditional gravity-flow methods.

Fit-for-purpose flash purification column.

Biotage® PeptiPEC-96 High Throughput Kits streamline peptide purification with the automated PurePep® Easy Clean (PEC™) catch-and-release strategy. Purify 96 peptides simultaneously while removing impurities efficiently for cleaner, higher-quality peptide libraries.

Biotage® PeptiRen-96 well plates streamline peptide library workflows by enabling simultaneous post-synthesis clean-up of 96 crude peptides. Featuring reversed-phase media optimized for peptide SPE, they provide an efficient, automatable solution for rapid enrichment and preliminary screening.

The Biotage® ME System (Micro-Extraction) is a high-performance, semi-automated platform designed to bring the precision of dual-flow chromatography to small-scale protein and plasmid purification.