Drug discovery > Lead Discovery Products & Reviews

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

LabPro Connect manages MicroScan ID/AST testing data right from your laboratory workstation

LabPro-MBT software combines MicroScan accurate AST results with the rapid ID of the Bruker MALDI Biotyper System.

Fully automated and integrated platform to purify nucleic acids of the highest yield and purity for downstream applications.

Previously known as SolventTrapSVOC Solvent Recovery System

Automated sample preparation workstation for high volume samples  

SPE Disks for Water Extraction

One single kit to quickly and reliably determine 18 different and clinically relevant steroids with only one extraction process.

Outstanding GMP QC Testing Services offering Bioassays throughout the lifecycle of drug development, to support the release, stability, and in-process testing of your drug.

The QuEChERS Clean-up step is rapidly completed using the QuICK QuEChERS cartridge. This self-contained cartridge contains 110 mg of anhydrous MgSO4 and 180 mg of PSA. Placed on the end of a disposable syringe, the QuEChERS extract is pushed through directly into a sample vial for analysis. Clean-up is equivalent to dSPE clean-up, but faster and easier, eliminating the need for centrifugation.

Pre-packed 6 ml anion exchange SPE cartridges are made to the exact specification of EPA Method 548 to assure high capture efficiency and consistent results for excellent analytical reproducibility.

Airborne laboratory contamination may interfere with solid-phase extraction results. This problem is easily prevented by using the Zero-Blank filter. Using an adaptor (included), this cartridge is fitted on top of the SPE cartridge during the drying step and captures potential contamination making results more accurate.

Clean, activated, and ready-for-use, 30 mesh copper granules remove unwanted elemental sulfur from pesticide and PCB extracts. Granules are much easier to use than copper powder or TBA and eliminate the need for toxic mercury.

Chlorophyll in QuEChERS extracts must be removed to reduce potential instrument downtime. This is removed from extracts using graphitized carbon black (GCB) Unfortunately, GCB also removes planar analytes reducing analytical accuracy. ChloroFiltr®, used in place of GCB in dSPE tubes, removes unwanted chlorophyll without removing pesticides or environmental analytes. No change in procedure are required.

When clean plastic cartridges are not clean enough. 6 mL glass SPE cartridges can be packed with your choice of UCT sorbent using PTFE frits and individually sealed in certified Mylar for purity.

Enviro-Clean 500mg/6mL cartridge PSDVB w/Polyethylene frits. It is used with EPA Methods 526, 527, 528, 529 and 8330.

Select pH Buffer Pouches - UCT has developed a line of premeasured “ready-to-use” phosphate and acetate buffer pouches. These pouches contain the correct quantity of reagent to quickly and accurately prepare buffers at the correct pH and concentration to simplify solid-phase extraction methods.

Styre Screen® Extraction Columns contain an ultra clean, highly cross-linked styrene and divinylbenzene copolymer. The Styre Screen particles have an average particle size of 30 microns and a very high analyte capacity making them ideal for standard solid phase extraction applications. The increased analyte capacity means that less sorbent bed mass is needed which results in faster flow rates and less solvent use. Higher th…

XtrackT® columns are gravity-flow SPE columns that allow for extraction of acids, neutrals, bases in viscous samples such as equine urine, post-mortem blood and tissues, amniotic fluid, and meconium.

The Universal Vacuum Manifold system accommodates 24, 48 and 96 well plate configurations. This system includes a collection plate, extraction plate, manifold and vacuum gauge waste base for all wellplates.

Universal C18 - Enviro-Clean SPE Cartirdges Enviro-Clean® cartridges are designed for use by analysts that demand a clean, dependable and rugged product for low level environmental analyses. Universal C18 is used for the extraction of pesticides, herbicides and PCBs, etc.Part # ECUNIC18