Search results for "kings college london"

Separating the signal from the noise. PFAS Solution Installation Kits provide everything  you need to get your analytical system PFAS ready.  

Mercodia offers multiple solutions for the life science industry including custom production of assay kits, buffers, coated plates, and key components.

The Multiplexed p53 and p21 Detection Kits are for the simultaneous quantitation of p53 and p21 expression in the same cell.

EPIgeneous™ Binding Domain Assay Kits for studying epigenetic readers. This biochemical assay platform enables a no-wash, sensitive, reliable detection of protein/protein interaction between epigenetic binding domains and histone sequences modified by epigenetic enzymes. Three assay kits (A, B and C) have already been validated and fully optimized on a selection of 28 key binding domains. For non-validated reader domains, a f…

 Dose-responsive inducible mammalian expression  Induction as high as 1,700 fold  Tightly repressed  Novel IRES site allows expression of both receptor subunits from the same CMV promoter  Retroviral and plasmid gene delivery systems available  Stable receptor cell lines available

PromoCell introduces the next generation 3D Tumorsphere Medium. This medium has been designed to meet your requirements for the extended serial culture of tumospheres. Our 3D Tumorsphere Medium supports the culture of the most commonly used cancer cell lines.

Emerging contaminants such as microplastics require innovative analysis techniques. Applying quantum cascade laser spectroscopy, the Agilent 8700 Laser Direct Infrared (LDIR) Chemical Imaging System brings unprecedented speed of analysis and ease of use to analytical challenges such as this.

Sigma-Aldrich ® one-part sgRNA and two-part crRNA:tracrRNA systems accelerate genome editing with Cas9 protein, mRNA, or established Cas9 expressing cell lines. Our guides are compatible with a variety of delivery methods including microinjection, electroporation, and lipofection.

Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescence and enabling readings down to 340nm Opaque walls to prevent well-to-well crosstalk Optically clear flat well bottom permits direct microscopic viewing Can be used for both top and bottom reading instruments Flat bottoms with 360 µL total volume Recommended working volumes of 75 to 200 µL Nonreversable lids with cond…

E-Cube™ Fittings Kit contains: 3/16 inch Norprene™ Pump tubing (18 inches) Tubing ratchet clamps (6ea) Barbed T-fittings (2ea) Barbed Reducing Connector (1ea) 4 inch Wire ties (20ea) Barbed Y-connector (1ea) Barbed 50mm PTFE syringe filters (2ea) Male barbed luer fittings (5ea) Female barbed luer fittings (5ea) Male luer plugs (2ea) Interlink injection sites (2ea) Blunt plastic cannulas (1 sleeve) 1.0 inch I.D. x…

These 30 mL PYREX® high form crucibles have 30mm diameter coarse porosity (40 to 60 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be re…

These 30 mL PYREX® high form crucibles have 30mm diameter fine porosity (4 to 5.5 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be remo…

These 30 mL PYREX® high form crucibles have 30mm diameter medium porosity (10 to 15 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be re…

These 50 mL PYREX® high form crucibles have 40mm diameter coarse porosity (40 to 60 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be re…

These 50 mL PYREX® high form crucibles have 40mm diameter fine porosity (4 to 5.5 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be remo…

These 50 mL PYREX® high form crucibles have 40mm diameter medium porosity (10 to 15 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be re…

These 30 mL PYREX® low form crucibles have 30mm diameter coarse porosity (40 to 60 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be rem…

These 30 mL PYREX® lowform crucibles have 30mm diameter fine porosity (4 to 5.5 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be remove…

These 30 mL PYREX® low form crucibles have 30mm diameter medium porosity (10 to 15 µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace. Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they should not be rem…

Kits for large-volume (LV), medium-volume (MV) and small-volume (SV) emulsion-based clonal amplification of a DNA library prepared using the appropriate GS FLX Titanium series library preparation procedure. The GS FLX Titanium emPCR Kits (Lib-L) contain all reagents and other components required for two emulsion-based clonal amplification reactions (which can be pooled, if applicable). Contents The GS FLX Titanium emPCR Kits…

The Thermo Scientific KingFisher Pure Kits are specially designed for use with the KingFisher nucleic acid purification system. These optimized reagent kits help you achieve rapid, high-quality results for a variety of applications – with minimal effort. KingFisher Pure Kits are now available for Cell and Tissue DNA, DNA Blood, DNA Plant, Plasmid, RNA Blood, RNA Plant, RNA Tissue, and Viral NA.Key Features: Developed spec…

The flotation washer is designed to wash/clean strawberries, plums, cherries, dates, mushrooms and similar products. This involves removal of particles, either lighter or heavier than the product, e.g. leaves, straw, stones, sand, etc.The product is carried forward on a segment belt. A pipe system with nozzles agitates the product to improve the quality of the washing process.The flotation washer consists of Washing vessel…

Commercially available research kits extend access to Breath Biopsy technology for discovery of VOC biomarkers in early disease detection and precision medicine

R&D Stem Cell Kits and Panels Research in developmental biology has led to the discovery of several types of stem cells, including embryonic stem (ES) cells, embryonic germ cells, and adult stem cells. Techniques and reagents developed for the in vitro culture, manipulation and characterization of stem cells provide unprecedented opportunities to study embryology and develop disease treatments. R&D Systems offers the follow…

KAPA Stranded mRNA-Seq Kits includes all the enzymes and buffers required for cDNA library preparation for Illumina Next-Generation Sequencing, utilizing 100 ng – 4 µg of total RNA. KAPA mRNA Capture Beads are included for isolation of poly(A)-tailed RNA. Kits provides precise measurement of strand orientation (>99%), uniform coverage, and high-confidence mapping of alternate transcripts, and are optimized for the improved…