Search results for "flow cytometry"

Specac’s High Temperature High Pressure Cell (HTHP) Accessory is a multipurpose cell for the FTIR analysis of solid samples in transmission, decomposition, or specular reflectance modes. Sample temperatures up to 800ºC can be obtained and the cell can operate at pressures from vacuum (0.1 torr) to 1000 psi for in-situ reaction studies. The standard HTHP Cell (GS05850) can be used for transmission analysis of 13 mm diameter…

Premium TPP Tissue Culture Dishes Key Features: Vents provide airflow between stacked dishes for consistent growth conditions and prevention of Condensation Surface treatment of the growth area developed by TPP optimally enhances the proliferation of the cells Serrated grip ring on lid prevents accidental drops or lid lift offs in unsterile conditions Double marking areas - yellow and frosted marking spots for e…

Making more informed decisions in less time is a universal asset in today's laboratory. Ultra Performance LC™ (UPLC™ ), a new category of separation science pioneered by Waters, will eliminate significant time and cost per sample from your analytical process—while improving the quality of your results. With UPLC technology you benefit from: more data, faster unparalleled sensitivity greater efficiency and confidence in…

VanGuard Pre-Columns for UPLC® separations are guard columns that are designed for use with the ACQUITY UPLC® system. These guard columns use an ultra-low volume design (patent pending) that efficiently protects UPLC column performance. This ultra-low volume design does not compromise the UPLC holistic design approach to higher efficiency, greater resolution and increased throughput. Guard columns are typically used in appli…

GC/MS methods are widely used for forensic toxicology, especially for the screening of large numbers of target compounds in complex matrices. Full-scan EI methods offer many advantages for broad-range screening, such as an unlimited number of targets, full-spectrum identity confirmation, and library searching for identification of non-targets. Technologies such as Capillary Flow Technology backflushing, Deconvolution Reporting…

respons®910 is a compact and fully-automated bench top analyzer for maximum efficiency. During its development, special attention was paid to easy handling and optimized work flow thus leading to the ideal clinical chemistry system for many laboratories. The new software version 4.8.0.8 is available for respons®910 devices. DiaSys highly recommends to up-grade all installed respons®910 analyzers because it eases daily labor…

PURELAB Option systems from ELGA are the very best solution for producing pure water (type II) They offer a wide range of flow-rates to suit your needs, advanced purification technologies to provide pure water on demand, plus microprocessor control for consistent quality. Different laboratory applications demand different water purity levels. ELGA offers a choice of general laboratory grade water systems in the PURELAB…

The Luc-Screen® assay system with extended-glow light emission is designed for sensitive detection of firefly luciferase reporter enzyme.

Abdos high quality disposable Petri Dishes are suitable for all microbiological applications manufactured as per ISO 24998 ‘Plastics laboratory ware — Single-use’. Robust dimensional accuracy of 90 mm ensures compatibility with most automated systems. Extremely high optical clarity for easy view on microscope. Vented Dishes have elevated lid that allows for superior gas exchange and evaporation. Non-Vented Dishes have fl…

(This is the suggested replacement for 3855 and 353381)Excellent signal dynamic range due to low background fluorescence and enhanced signal intensitySuperior flatness minimizes variability within a plate and between platesFlat bottom wells are compatible with automated dispensers including the PerkinElmer FlexDrop™TC-treated for optimal cell attachmentWorking volume of up to 10 µL"

The SkyScan 1276 is a high performance, stand-alone, fast, desk-top in vivo micro-CT with continuously variable magnification for scanning small laboratory animals (mice, rats, ...) and biological samples. It has an unrivalled combination of high resolution, big image size, possibility for round and spiral (helical) scanning and reconstruction, and low dose imaging.

Low cost ultrapure water (type I) PURELAB Classic water purification systems combine high performance with economy to deliver 18.2MΩ-cm water at a very cost-effective price. You can choose from four models in the range to meet your specific lifescience, analytical and general applications. Each system delivers up to 2 liters a minute.  

Brilliant II QPCR and QRT-PCR reagents were developed to maintain the high quality of our original Brilliant product line, but with a significant improvement in sensitivity of detection, ensuring reproducible quantification even at low target concentrations. With the addition of ROX reference dye to our master mix, we have streamlined the reaction setup process.  Formulations available with low and high concentrations of ROX…

Brilliant II SYBR® QPCR and QRT-PCR Master Mix Kits with High/Low Rox offer superior sensitivity for improved quantification and reproducibility. Brilliant II kits also show more consistent performance across a wide range of template concentrations and different targets.  New formulations available with low and high concentrations of ROX reference dye  Improved performance with earlier Ct detection across a wide dynamic ran…

2 ml, 2x real-time PCR mix, contains dNTPs, Sso7d fusion polymerase, MgCl2, ROX passive reference d

(This is the suggested replacement for 1005-1L)1L beaker, with spout, manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, these beakers have a double graduated metric scale to indicate approximate content and an extra large marking spot. For PYREX® beaker covers, see Catalog No. 9985 or No. 9990. The 1L beaker is designed to ASTM E-960.

ULA microwell plate for 3D culture and measurement

ULA microwell plate for 3D culture and measurement

A new design of ultra-low attachment 3D plate to facilitate easy handling of media exchange without disturbing spheroid formation 

An open-platform ice-free cooler that accommodates most CoolRack® and CoolSink® modules. Low profile and small footprint make it ideal for use in the hood, keeping samples cold (0.5° to 4.0°C) up to four hours. 1°C to 8°C temperature indicator provides visual assurance of temperature performance. To extend the cooling duration, keep an additional XT Cooling Core in the freezer and rotate the Cores as needed.

Low profile, 0.1 ml polypropylene wells, working volume: <100 µl, total well capacity: 200 µl; can be used as a standalone product or inserted in any of the Vari-Plate™ frames available for ease of handling. Molded from virgin polypropylene under cleanroom conditions strips are available in either clear polypropylene for standard PCR techniques, or in white polypropylene for use in fluorescent detection applications like qPCR…

B Medical Systems' Laboratory Freezers are devices for the storage of laboratory products, samples, test materials, chemicals or reagents at temperatures below -20°C.

As an alternative to conventional columns, PharmaFluidics offers micromachined nano-LC columns or micro Pillar Array Columns (µPAC™). These µPAC™ columns display exceptional separation properties with unprecedented peak capacity and narrow peak shapes at low operating back-pressure. µPAC™ column, 200 cm length, with pillar array backbone at interpillar distance of 2.5µm, C18.

The Chromaster Analytical HPLC System from Hitachi has established new limits in Performance, Ease-of-Use, and Robustness. Innovative low-pressure gradient mode, “High Frequent Mode,” and Hitachi’s proprietary real-time feedback control system greatly suppress liquid pulsation resulting in unparalleled retention time and gradient reproducibility. The Hitachi Chromaster is also available with 60 MPa maximum pressure.

This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is tooled for uniform stopper fit, accommodating a No. 3 rubber stopper.