Odenberg is the preferred supplier of product peeling systems to the world’s largest French Fry producers peeling over 60% of the worlds French fries.Odenberg’s purpose built and designed high yield units are also used on other small products such as baby carrots etc. We also deliver systems for peeling all types of root vegetables, beets, chillies, onions etc.At Odenberg we specialize in building robust, low maintenance and h…
The flotation washer is designed to wash/clean strawberries, plums, cherries, dates, mushrooms and similar products. This involves removal of particles, either lighter or heavier than the product, e.g. leaves, straw, stones, sand, etc.The product is carried forward on a segment belt. A pipe system with nozzles agitates the product to improve the quality of the washing process.The flotation washer consists of Washing vessel…
The Cabinplant paddle washer is designed to wash/clean leafy vegetables such as spinach and molokhia. Cleaning includes removal of particles heavier than the product itself, e.g. sand, stones, etc.In many cases, the washing process is split up into several steps using two or three machines, depending on capacity.The product is flumed/paddled through the machine. The paddles ensure submersion of the leafy product during the was…
Moisture Research in a BoxFor food or pharmaceutical scientists, moisture sorption data can make or break a product. The AquaLab Vapor Sorption Analyzer (VSA) introduces simplicity, control, and affordability into the process of gathering moisture sorption isotherm data. Before you learn about our product, you might be interested in:- Why isotherms are important- 2 other ways people measure moisture sorption- 5 examples of h…
Most moisture analyzers use chemicals or high temperatures. Not AquaLab. Instead, an infrared beam focused on a tiny mirror determines the precise water activity of the sample. That water activity reading is then translated into moisture content, based on a product-specific calibration model.What Products Work?Most products with less than 40% moisture (by weight) will work using the dew point method. Products with moistures a…
HM-406 Fluorescent Penetrant is a medium-high sensitivity, water-washable fluorescent penetrant for inspecting castings, extrusions, and similar parts. Designed for dip tank use with good self-developing properties. It is a versatile, general purpose penetrant for use on a variety of materials, including aluminum and magnesium castings. Complies with low-sulfur and low-halogen requirements.
BRITEMOR PENETRANT PROCESSES are approved or conform to many internationally recognized specifications. Several processes or individual products are also approved and included in independent company specifications for the inspection of new or overhauled components.CHECKMOR COLOUR CONTRAST (RED DYE) PENETRANT PROCESSES are versatile and economic method of detecting discontinuities which are open to the surfaces of essentially…
The AMIGO instrument is the smallest and lightest ACFM inspection system* available.TSC has taken advantage of its vast wealth of knowledge and experience to make the AMIGO a wieldy, rugged (rated to IP54) instrument that is an ideal tool for site inspections. Specifically designed to function in a wide range of environments the AMIGO has easy-access cabling and large unobstructed buttons which allow the operator to concentrat…
ACFM-7107 is a quadplexer that combines PCS and Cellular duplexers into a single miniature package. Its also features a single antenna connection, eliminating the need for antenna switching. The ACFM-7107 is designed with Avago Technologies' Film Bulk Acoustic Resonator (FBAR) technology. The ACFM-7107 also utilizes Avago's innovative Microcap bonded-wafer, chip scale packaging technology.
The ACPD Crack Microgauge MK IV, for laboratory use, is a rugged instrument with high stability and resolution.It is available with built in multiplexing as an option capable of extension to 128 channels and 4 output currents for monitoring multiple channels.The MK IV can be used with a manual low inductance probe for individual investigations or with an array of fixed or spot welded connections to check on surface or weld toe…
The CGM-7 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the CGM-5R this unit improves upon theCGM-5R specification by offering two channel operation, higher frequency and current outputs, fullcomputer control and a variety of expansion options.It utilises the alternating current potential drop method (ACPD) which is an established techniq…
The DCM-2 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the DCM-1 this unit takes on boardcustomer comments and suggestions, as shown in its impressive features list.It utilises the pulsed current potential drop method (DCPD) which is an established technique alsocovered by the ASTM 647 standard. The technique involves passing a constant…
The FTA Reversing DC Potential Drop System has been designed by Keith Donald to provide the precise current and amplifier stability necessary for the reversing DC potential drop method of monitoring crack size. Custom-manufactured at FTA’s facility, the system is intended to be used in conjunction with the FTA Adwin-Gold Fatigue Crack Growth Rate data acquisition and control testing software, which synchronizes current reversi…
The Digital Barkausen Noise Analyzer - Rollscan 300 - is a fast, easy and reliable way to improve product quality.Rollscan 300 saves on material and labor expensesRollscan 300 is a digital Barkhausen noise analyzer. It is designed for surface quality control and testing of near-surface defects such as grinding burns, involving changes in stress and microstructure in a wide variety of ferritic steel and other ferromagnetic mate…
General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.
A range of Magnetic Particle Materials including wet and dry method powders and speciality products.
The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…
MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.
Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…
Zet@Master is the powerful stand alone equipment of CMS Zet@ range in eddy current testing method. Multi channel and multi frequency, it allows the connection of several EC systems with only one unit to work in all configurations, on line or off line. It is able to drive several lines simultaneously. Deduced for flaws detection on tubes (welded or not), wires, bars, strip and automotive parts, made of austenitic, ferrous and n…
HD - CR 35 NDT, A film replacement technology, Computed Radiography (CR), is actually a digital radiography technique that uses what we called an Image Plate (IP) made of phosphor material to replace film as the imaging media. Like film the IP comes in various format and sizes and it is also flexible like film. After being exposure to radiation during x-ray or gramma ray inspection, these IPs are being scanned by the CR scanne…
With the SENTINEL™Vision HR Digital Radiography System you get state-of-the art imaging quality in a portable, durable and affordable package. Specifically designed for inspections both in the field and in the lab, SENTINEL™Vision HR is a computed radiography system that uses flexible phosphor imaging plates instead of film to create high resolution images. Its rugged portability makes it ideal to use in field conditions, and…
SENTINEL™ Model 880 Delta, Elite and Omega source projectors are portable, lightweight and compact industrial radiographic exposure devices. The patented device body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within a 300 series stainless steel tube with stainless steel discs welded at each end forming a cylinder shaped housing. The discs are recessed to provide protection for the rear moun…
The BALTOSPOT Series is comprised of three divisions of directional and panoramic x-ray generators with varying specifications corresponding to different NDT applications, field activities and budgets. The CERAM x-ray generators are pulsed wave units available in maximum capacities of 235 and 300kV. They are directional tubes which contain ceramic tubeheads with a copper external anode and a beryllium window.Features Port…
Imperium’s i600 Acoustocam™ generates real time C-scan video images of subsurface defects. The output provides similar information to much more complex legacy systems, but with strikingly clear images. Clients choose the i600 Acoustocam™ because of its ease of use,portability, and broad application set in the market. Current systems require extensive training and skill. In contrast, a user of the i600 Acoustocam can utilize th…
