Gas Purifiers and Filters Products & Reviews

The Agilent Gas Clean Filter System delivers clean gases, reducing the risks of column damage, sensitivity loss, and instrument downtime. Inserting a Gas Clean Filter System in the gas line immediately before the instrument inlet greatly reduces the level of impurities, thus improving trace analysis. 

The only high-purity gas that guarantees minimal impurities.

NANOCHEM® WK-Series (White Knight™) purifiers offer the highest lifetimes and the best impurity removal efficiencies in a very economical design. The in-line design enables a very compact footprint and allows drop-in replacement of competing hardware designs.  WK-Series are available in a number of sizes ranging from 55-ml for point-ofuse applications to 9-liters for bulk gas purification. Flow rates range from 3 slpm (0.2 NM3…

Economy Indicating Moisture Removal Traps   Agilent Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared to traps manufactured from acrylic. Agilent Indicating Moisture Traps have become the…

The Renewable Gas Purification System from Agilent not only traps large quantities of contaminants and lasts a long time, but it is also recyclable. 

Extra large gas purifiers (750 cc) are ideal for bulk purification applications or where several instruments are plumbed from a single gas source. They provide a low cost alternative to UHP grade gases. We construct each trap from one piece of heavy walled aluminum tube to eliminate potential leaks due to faulty welds. The moisture and hydrocarbon models can be refilled. The big oxygen traps must be replaced, but we offer indi…

Our Hydrocarbon Traps allow you to refill your trap and remove extremely low levels of hydrocarbons. Big Hydrocarbon Traps (BHT) are ideal for bulk purification applications or where several instruments are plumbed from a single gas source. Hydrocarbon Removal S-Traps are filled with 40/60 mesh activated charcoal and can be reconditioned. Capillary Grade Hydrocarbon Traps (HT3) feature extremely high surface area, are coconu…

 Our hydrocarbon/moisture traps offer you flexibility -- refill your trap and remove extremely low levels of both moisture and hydrocarbons.  

Agilent's Indicating Oxygen Trap is designed to be used in conjunction with any of our high capacity, non-indicating oxygen traps. When properly installed downstream from the non-indicating trap, the Indicating Oxygen Trap provides a visual indication of oxygen breakthrough before contamination reaches sensitive system components. Unlike adsorbent materials utilized in competitive products, our indicating media can be exposed…

Capture contaminants released by split injection systems   Split vent traps capture contaminants released by split injection systems. Remember to replace the split vent cartridges every six months.An internal split vent trap is factory installed to ensure the split vent line does not clog, creating system errors or expensive repairs.  Replacement cartridges are available. The optional external trap provides additional protecti…

Oxygen/moisture adsorbents team up to give you two functionalities in the same trap. Unlike some oxygen/moisture traps, these traps are disposable. Consider the safety, performance, and cost advantages of the Agilent capillary grade oxygen/ moisture traps (0T3) when comparing to heated, catalytic traps. The Agilent OT3 Trap contains a highly active, metal-containing, scrubbing material in an inert, aluminum body. This materi…

High Capacity Gas Purifiers (Remove Moisture and Oxygen)The best purifier choice for removing moisture and oxygen from carrier gas streams is our High Capacity Gas Purifier. It consists of three parts:• Clam-shell oven• Replaceable heating elements• Replaceable converter tube.A convenient starter kit contains all three items for new installations.

Supelcarb® is Back by Popular Demand!Supelco® is pleased to welcome the Supelcarb HC Hydrocarbon trap back to our line of in-line gas purifiers! Supelcarb adsorbent has the greatest trapping ability of hydrocarbons per gram of adsorbent (twice that of activated charcoal). These traps are the best traps available for removing hydrocarbons and other organics from carrier, fuel, air and other gas streams.

Specialty In-Line Purifier for GC-MS HeliumThe most sensitive GC-MS instruments require a steady stream of ultra-high purity (99.99999%) helium for optimal performance. To achieve this level, a specialty purifier is required. These purifiers contain multiple adsorbent beds for the removal of all critical contaminants. Additionally, the adsorbent materials are packed into the cartridge under helium to ensure no other gas off-g…

The Zebron Gas Management Filters and Traps removes contaminants from mobile phase gases which reduces potential column bleed, increases the lifetime of your column, and protects sensitive GC detectors from damage. Plug-In GC and LC-MS Gas Filters: Easy to use Dual filter housing prevents diffusion and increases safety Incredible High Capacity Ensures high gas purity (99.9999% pure) 4 Filter types: Universal,…

Ultra-high capacity for the contaminant of interest; either Moisture, Hydrocarbons, Oxygen, Sulfur and Mercury. For applications with a single contaminant of interest, high capacity contaminant specific traps are your best option, since they generally have four times as much capacity for the specific contaminant as a purifier. This translates to a capacity that exceeds twelve standard type "A" tanks of gas or the equivalent of…

VICI AG heated helium purifier provides point-of-use purification of helium or other noble gases, such as Ar, Ne, Kr, and Xe, to sub-ppm levels of reactive gaseous impurities, removing even nitrogen and methane. The nitrogen purifier is similar, purifying nitrogen to sub-ppm levels of gaseous impurities. The miniature version of each purifier is designed to be installed in a GC’s flow path immediately upstream of the injector.…

Gas purifiers for specific gases designed to go in-line with the carrier or detector gas supply, these gas purifier modules dramatically reduce contaminant PPM levels in helium, hydrogen, nitrogen, or air. They decrease baseline noise and increase GC/MS sensitivity and replace three traps with one gas purifier.This line includes original equipment gas purifiers for the Agilent Mass Spec and LC Mass Spec. Additional specialized…