Microplates Products & Reviews

ThermalSeal RT2RRTM 50 µm polyester sealing sealing films for real-time PCR are sized to fit within the edges of raised-rim 96-well plates. The same consistent ultra-high optical clarity as Excel's ThermalSeal RTTM sealing films (above) makes possible more reproducible, reliable, and consistent DNA amplification measurements. An inert, strong, temperature-resistant adhesive assures reliable sealing around each well. Two end ta…

The encapsulated silicone adhesive is non-tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat-resistant seal around each well on the plate. Adhesive on non-sealing areas of the film, such as directly over sample wells, remains encapsulated and inert. Excel ThermalSeal RTS films are sized to fit within the edges of raised-rim 96-well plat…

ThinSealTMpolyester sealing films are just 25 µm thick, clearer and marginally peirceable with single-channel pipettes for sample recovery. ThinSeal sealing film dimensions are 79.4 x 141.0 mm.Features:Functional temperature range from -40°C to +120°CAvailable sterile and non-sterile

ThinSealTMpolyester sealing films are just 25 µm thick, clearer and marginally peirceable with single-channel pipettes for sample recovery. ThinSeal sealing film dimensions are 79.4 x 141.0 mm.Features:Functional temperature range from -40°C to +120°CAvailable sterile and non-sterile

A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II…

A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal I…

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 384-well plates. AlumaSeal 384TM sealing films have one end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 137.3 mm x 82.5 mm (including single 13.5 mm end tab).Features:heat & cold resistant, recommended for temperatures from -80 °C to +120 °Ccertified DNase-, RNase-, and nucleic-acid-free

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 96-well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96TM sealing films have one partial-width end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 127.0 mm x 77.8 mm (including single 9.5 mm end tab).Features:fits inside rim of raised-rim plateheat & cold resistant, recommended…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

The automation-friendly two-component skirted and semi-skirted PCR plates made from biobased feedstock

Effective adhesive seal prevents evaporation during reaction and storage Can be removed from plate without leaving any residue Autoclavable (121°C, 20 min.) Certified free of human DNA, DNase, RNase and PCR Inhibitor*1 PCR Film, adhesive Sample can be visually monitored through the transparent film PCR Foil, adhesive Easy to pierce Pipette tip does not become tacky (ideal for automated systems) *1 Certifi…

Eppendorf sets the new standard for deepwell plates with new RecoverMax well designs. The well geometry enables high-speed pipetting, excellent mixing and high-speed centrifugation to accelerate your manual as well as your automated work processes. Sophisticated colors and coding make reading, orientation and manual handling easier and faster. The plates, made of virgin polypropylene, are available as Standard, Sterile, DNA…

Alternative sealing method for 96-well plates Multiple-use Autoclavable (121°C, 20 min.) Certified free of human DNA, DNase, RNase and PCR Inhibitor*1 *1 Certificate, test procedures and detailed information on request.

Product features Hermetic heat-sealing of microtiter plates Optimum elimination of evaporation in PCR, avoiding cross-contamination Ideal for transporting and storing samples Seals 96 and 384-well plates; suitable for plates of different heights Suitable for plates of different heights Optimum sealing with Eppendorf Heat Sealing Foils and Films at a preset temperature Compact design, portable device Integrated…

The Eppendorf Polypropylene Microplates set new standards in terms of transparency, purity and stability! With the easy to read OptiTrack® matrix and a clarity, unique and unbeaten for polypropylene microplates, the identification of the correct plate or an individual well is easier, less error-prone and up to 30 % faster. Do you look for clear signals in fluorescence or luminescence detection even with low concentration sampl…