This PYREX® general purpose condenser has a 24/40 Standard Taper inner joint at the bottom with a drip tip. Although the condensing area per unit length of the 400mm long jacket is low, the large capacity water jacket gives efficient cooling. They can be used for either distillation or extraction. Condenser tubulations are approximately 10mm O.D.
This PYREX® general purpose condenser has a 24/40 Standard Taper inner joint at the bottom with a drip tip. Although the condensing area per unit length of the 500mm long jacket is low, the large capacity water jacket gives efficient cooling. They can be used for either distillation or extraction. Condenser tubulations are approximately 10mm O.D.
These PYREX® Graham condensers have a high surface area per unit length of the 300mm long jacket with a 24/40 Standard Taper outer joint at the top and a 24/40 Standard Taper inner joint at the bottom with a drip tip. They are primarily used in vacuum distillations. Condenser tubulations are approximately 10mm O.D.
These small 30 mL PYREX(r) Kjeldahl flasks, without tooled neck, is suitable for multiple microdigestions. They take a No. 0 rubber stopper. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring supports for this purpose. -Reference: ASTM E-147.
These pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. The top end of 5 mL to 25 mL sizes is constricted (Mohr type). They are calibrated “To Deliver” their total capacity without blow-out.Do not pipet by mouth. We suggest using a mechanical pipetting device. Reference: ASTM E-1293.
These sterile disposable 1 mL PYREX® serological pipets are calibrated (TD) with blow-out. They are packed in a flip-top canister to keep the pipets racked. These pipet canisters come sealed in polyethylene bags for sterility. New I.S.O. color-coding is printed directly on the tear strip for easy identification by size. Reference: ASTM E-714.
These sterile disposable 10 mL PYREX® serological pipets are calibrated (TD) with blow-out. They are packed in a flip-top canister to keep the pipets racked. These pipet canisters come sealed in polyethylene bags for sterility. New I.S.O. color-coding is printed directly on the tear strip for easy identification by size. Reference: ASTM E-714
These sterile disposable 5 mL PYREX® serological pipets are calibrated (TD) with blow-out. They are packed in a flip-top canister to keep the pipets racked. These pipet canisters come sealed in polyethylene bags for sterility. New I.S.O. color-coding is printed directly on the tear strip for easy identification by size. Reference: ASTM E-714.
(This is the suggested replacement for 4990-125)These 125 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 125 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-1L)These 1L PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 1L Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-25)These 25 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 25 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-250)These 250 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 250 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-50)These 50 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 50 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-500)These 500 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 500 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is suggested replacement for 3151.) Secure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks) Nonpyrogenic tested to less than 0.1 EU/ mL Volumetric graduations and writing patch Vented caps incorporate a 0.2 µm hydrophobic membrane for optimal gas exchange while protecting against contamination Growth area and volume are nominal
The Whitley A20 Workstation is one of our smallest anaerobic workstations. It provides excellent conditions for the processing, incubation and examination of samples without exposure to atmospheric oxygen and is incredibly gas efficient. It can accommodate 240 x 90mm Petri dishes whilst retaining a generous working area. It will actually hold up to 400 plates for emergency anaerobic incubation.
With their proprietary technology, the iLite® technology Svar can develop Report Gene Assays – that area cleverly designed, sensitive and specific cell based reporter-gene system with luciferase readout. Svar can develop assays for virtually any pharmaceutical target that allow an easy, rapid and accurate test format for a wide range of applications, such as Immunogenicity and Potency assays.
1 x 96-well, includes magnetic capture beads coupled with SARS-CoV-2 nucleocapsid, receptor-binding domain, spike 1, and spike 2 viral proteins, anti-human IgG detection antibody, ready-to-use positive control, ready-to-use negative control, wash buffer, assay buffer, serology sample diluent, detection antibody diluent, streptavidin-PE, 96-well flat-bottom plate, and sealing tape.
The EMA 502 is a precise, versatile, and cloud-enabled micro elemental analyzer for simultaneous Carbon, Hydrogen, Nitrogen, Sulfur, and Oxygen determination in organic samples for various industrial sectors. The EMA 502 offers consistent performance, ease of use, and premium features for combustion analysis in accordance with international standards: AOAC, AACC, ASBC, ISO, DIN, IFFO, OIV, ASTM, EPA.
Service walls are rich in variants and require less space at the same time. Media supply plus storage space, as a room divider or instead of a laboratory wall - our range is as diverse as your needs. Our steel material offers the best possible hygiene, as well as the low-joint finishing thanks to large-area media screens.
BioDot’s AD3220 system is designed for high-speed aspirating and dispensing applications to glass slides, microtiter plates, membranes or any custom surface. This tabletop platform is ideal for R&D environments, but still provides enough dispense area for pilot scale production. Dispensing technology, number of channels and deck options enable customization to meet multiple application needs.
Abdos Vertical dual mini system is designed to run two mini PAGE or SDS-PAGE hand cast gels. The system comes with standard casting unit, combs & spacers of 1 & 1.5 mm thickness & a set of glass plates. Low buffer consumption design having small footprint area, occupies minimal lab bench space. Unique “T” spacers for leak proof casting.
Reagents and materials supplied in the Blood Vessel Staining Kit are sufficient for staining 100 tissue sections and when stored at 2-8C is stable up to the expiration date. ECM590 detects vWF and CD31 in human paraffin embedded tissues. In rat or mouse tissues only the vWF antibody is effective in paraffin; the CD31 antibody does not react with rodent CD31. CHEMICON's Blood Vessel Staining Kit is a very sensitive immunohistoc…
Millipore’s FlowCellect™ DNA Damage (Histone H2A.X) and Cell Cycle Analysis Kit is designed to identify the linkage between DNA damage in relation to cell cycle checkpoints in flow cytometry applications. The kit includes a directly conjugated Anti-phospho-Histone H2A.X (Ser139) Alexa Fluor® 488 antibody plus a DNA dye (Propidium Iodide) which allows the researcher to perform bivariate analysis to identify where DNA damage ta…
Millipore’s FlowCellect™ DNA Damage (ATM) and Cell Cycle Analysis Kit is designed to identify the linkage between DNA damage in relation to cell cycle checkpoints in flow cytometry applications. The kit includes a directly conjugated Anti-phospho-ATM (Ser1981) Alexa Fluor® 488 conjugate plus a DNA dye (Propidium Iodide) which allows the researcher to perform bivariate analysis to identify where DNA damage takes place relativ…
