Products & Reviews

The MILLIPLEX® MAP Mouse Bone Panel 1Ais used for the simultaneous quantification of the following Mouse analytes: ACTH, IL-6, Insulin, Leptin, Osteoprotegerin, TNF-α

The MILLIPLEX® MAP Mouse Bone Panel 2Ais used for the simultaneous quantification of the following Mouse analytes: ACTH, IL-6, Insulin, Leptin, RANKL, TNF-α

150cm2 available growth area Manufactured from optically clear virgin polystyrene Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic

175cm2 available growth area Manufactured from optically clear virgin polystyrene Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic

Monoclonal Anti-Claudin-18.2 Antibody, Mouse IgG1 (3B10) was developed to be exquisitely CLDN18.2 specific, characterized as not cross-reacting with CLDN18.1 and without background staining.

CHEMICON's Blood Vessel Staining Kit is a very sensitive immunohistochemical tool for the detection of vascular endothelial cells, containing both anti-von Willebrand Factor and anti-CD31 primary antibodies and is applicable to a variety of species. This AP kit provides a simple, all-in-one method for the staining of frozen and paraffin-embedded sections in human (both CD31 and vWF) or rat and mouse (vWF only) tissues

Precision bore tubing is used to assure accuracy between any two points. Durable colored grad­uations are sharply defined and easy to read. Carefully ground standard taper stopcock gives precise control. Each buret is supplied with a dust cover. All sizes furnished with a 2 mm bore stopcock plug. The capacity tolerance on these burets is established by ASTM E-287 and they are calibrated in accordance with ASTM E542.

Precision bore tubing is used to assure accuracy between any two points. Durable colored grad­uations are sharply defined and easy to read. Carefully ground standard taper stopcock gives precise control. Each buret is supplied with a dust cover. All sizes furnished with a 2 mm bore stopcock plug. The capacity tolerance on these burets is established by ASTM E-287 and they are calibrated in accordance with ASTM E542.

Precision bore tubing is used to assure accuracy between any two points. Durable colored grad­uations are sharply defined and easy to read. Carefully ground standard taper stopcock gives precise control. Each buret is supplied with a dust cover. All sizes furnished with a 2 mm bore stopcock plug. The capacity tolerance on these burets is established by ASTM E-287 and they are calibrated in accordance with ASTM E542.

Precision bore tubing is used to assure accuracy between any two points. Durable colored grad­uations are sharply defined and easy to read. Carefully ground standard taper stopcock gives precise control. Each buret is supplied with a dust cover. All sizes furnished with a 2 mm bore stopcock plug. The capacity tolerance on these burets is established by ASTM E-287 and they are calibrated in accordance with ASTM E542.

These 10mL PYREX® graduated cylinders have a funnel top and are calibrated "to deliver"(TD) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Permanent white graduations are easy to read. Bumper guards are not available for this size.Tested and calibrated in an ISO/IEC 17025 certified laboratory.

These 1L PYREX® graduated cylinders are calibrated (TD) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Permanent white graduations are easy to read. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement bumper guards, see No. 3066.Tested and calibrated in an ISO…

Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1…

(This is suggested replacement for 3056.) The Corning® 25cm² Rectangular Canted Neck Cell Culture Flask features a 25cm² available growth area and is manufactured from optically clear virgin polystyrene. The neck style is canted and cap style is vented. 25cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 1…

Waters ACQUITY UPLC solution for the analysis of Bisphenol A in Drinking Water is fully compliant with ASTM Method D7574-09. Optimized for use with the ACQUITY system, this kit contains: ACQUITY BEH C18, 1.7um, 2.1 x 50mm Column; ACQUITY Isolator Column; Oasis HLB 5cc (200mg) LP Glass Cartridges and LCMS Certified Vials. Included in ASTM Method D7574-09, these products have been selected to ensure to highest performance availa…

With the Sperm Antibody Haemagglutination Test the titer of sperm antibodies is detected in human serum.Antibodies directed against spermatozoa antigens may cause infertility in women or men. The application of the Spermatozoa Antibody Haemagglutination Test is recommended for the diagnosis of immunologically caused disorders of fertility. Unwanted childlessness is a growing problem with which up to 20% of all couples in the r…

These 1L Class A PYREX® mixing volumetric flasks have an upper bulb, located between the Standard Taper stopper and the capacity graduation to assist in the mixing of liquids or powders when shaken. This bulb is approximately one-tenth the flask rated capacity of the flask. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 22 Standard…

Corning® Collagen IV, mouse, 1mg, is used as a thin coating on tissue-culture surfaces to promote cell attachment and proliferation and to study the collagen's effects on cell behavior.SourceSource material tested for HBsAG, for anti-HIV-1 and anti-HIV-2, and anti-HCV virus-1 and virus-2.QualityElectrophoretically homogeneous (SDS-PAGE)Tested and found negative for bacteria, fungi, and mycoplasmaPreparation and StorageStable f…

These 10 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the insc…

These 100 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 13 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 1L Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 22 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the inscri…

These 200 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 13 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 25 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the insc…

These 250 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 16 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 2L Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 27 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the inscri…