Environmental monitoring and testing uses handheld portable analyzers, kits, spectrometers or chromatography systems for air, water, soil, food and other sample testing. Useful features of analyzers such as BOD and COD include portability, easy calibration, automation and sensitivity. Environmental test kits for pH, water, moisture, etc, should be accurate, sensitive, reliable, fast and easy to use.
GDX600 is designed for gas dosing from 0.35 nanoLiters/minute - suitable for aggressive, toxic and combustible gases. In combination with a MFC calibration gases can be prepared from pure gases or gas mixtures down to the ppb range.
GMS500 for preparation of calibration gases - is a PC controlled gas blending system with thermal mass flow controllers - designed for the use of aggressive, toxic and combustibel gases.
GMS500 for preparation of calibration gases - is a low-cost - PC controlled gas blending system with thermal mass flow controllers - not suitable for aggressive gases.
The FIAstar™ 5000 System is used for the automatic wet chemical analysis of nutrients and other parameters in water, soil and wine, as well as in meat or other food products. Single or multiple parameters can be analysed sequentially using just one Analyser module and Plug & Analyse Method Cassettes. The modular system can be expanded for the simultaneous determination of up to three parameters.The Plug & Analyse concept ensur…
The standard MAX 40 anemometer has proven to be a rugged, reliable and highly accurate anemometer. Professional quality at a minimum price. Its low moment of inertia and unique bearings permit very rapid response to gusts and lulls. The unique bearing system is self-lubricating and moisture or dirt will not destroy the bearings or degrade the performance (self cleaning). Moreover the anemometer is highly resistant to icing, ev…
The RSA is a rain sensor with a processor controlled relay contact and surface temperature control and is ideal for climate control systems such as sun blinds and greenhouse automation.For even better climate control we have the programmable sensor RSA-P. This reliable rain sensor can be programmed en read out on PC by the user.
Rain gauge with 200 cm² circular collecting area (WMO standard), made of stainless steel. The instrument consists of: 1 upper part with limiter ring, 1 lower part, 1 collecting can, 1 holder, 1 precipitation measuring vessel DIN 58667B, 0-10 mm, scaled in 1/10 mm precipitation height.
The Davis Remote Next G / 3G Telemetry Station sends it's weather data via the Next G / 3G network to a web server where the data is stored in a MySQL data base. The stored data can be retrieved at any time in csv, tab delimated or graphical format, www.weatherdata.net.au/demo/ . The station can also be accessed via your mobile phone? Simply text the station and it will text you back up to the minute weather stats. Alarm sets…
RA01 is a 2-component radiation sensor that is used for scientific-grade energy balance studies. The instrument has separate measurements of solar (Short Wave or SW) and Far Infra-Red (Long Wave or LW) radiation. Combined with estimates of SW solar albedo- and of surface temperature, this instrument can also be used for estimation of net-radiation. The advantage in this approach are reduction of costs and independence from loc…
Features Easy to read display Integral or interchangable probe Tried-and-tested housing With AirChip3000-technologyThe HygroPalm2-series is the latest development in handheld measuring instruments for relative humidity, temperature and dew point. Based on AirChip3000 technology, this indicator achieves a degree of accuracy not seen before.In combination with advances in sensor technology and integration, the HygroP…
Known worldwide for its consistent reliability and outstanding performance (±0.05% FS accuracy), the Model 270 has been used in applications such as Weather Monitoring, Avionics Systems, and Crucial Compensation of Barometric Pressure in Laser Interferometers.
Sensor for indoor and outdoor light intensity measurements. The sensor uses a silicon photovoltaic cell and is sensitive for wavelengths between 400 and 1100 nm.
The Thermo Scientific Developmental Neurotoxicity Panel is the only proven method for analyzing the effect of industrial chemicals on neuronal morphological chemicals in food, consumer products and the environment. The widespread use of these chemicals has led to fears of a link between exposure to such chemicals and the increased incidence of neurological disorders in children. The assay uses Neuroscreen (NS-1) cells, a subcl…
Environmental Monitoring Software Program Environmental Monitoring Program is an application capable of capturing all environmental data in a 21 CFR Part 11 Compliant, fully validated system. It is envisioned for sterile and non sterile health care industries (Pharmaceuticals, Biotech, Chemical, microbiological) food and any other sterile environment based on the latest guidelines from, FDA, EU, ISO 14644-1 and PDA Technical…
The CAI ZRE NDIR analyzer is based on the infrared absorption characteristics of gases. Us ing a single infrared beam to measure gas concentrations, the ZRE produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some o…
The CONFOCHECK is a dedicated FTIR system for the investigation of proteins in water. Its specific configuration facilitates a fast data acquisition (ca. 30 sec. per sample) with a high sample throughput controlled by an extremely user friendly software interface. Main applications for the CONFOCHECK are the detection and quantification of conformational changes in proteins and the protein concentration determination. Quant…
The HPGA has been designed with complete flexibility in its configuration. This allows up to two detectors, multiple columns in an air blown oven and up to five switching valves for full multi-dimensional chromatography. The system is designed in a 6U 19” rack module, with a secondary module containing the supply gas conditioning units. Detection limits as low as 10 ppb for trace elements, can be obtained when using a Pulse…
The CAI 600P & 600F digital analyzer is designed around a state-of-the-art 16-bit microprocessor, c an be manually or remotely operated, has precision measurements and more. The California Analytical Models 600P & 600F digital analyzer product line is designed around a state of the art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operate…
This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produces light which is measured by a photomultiplier tube (PMT). UV Fluorescence Analyzer(s) Highlights: New Compact PMT Integrated PMT Peltier Cooling 10,000 Hour Ultraviolet Lamp Optional CO2 or O2 Channel Compact Size…
FTIR Spectroscopy is an analytical technique which measures the infrared intensity versus wavelength (wave number) of light. The FTIR Spectrometer obtains infrared spectra by collecting an interferogram of a sample signal with an interferometer. FTIR Analyzer(s) Highlights: No Liquid Nitrogen Required Compact, Industrial Design w/Fast Repsonse Proven Rugged Interferometer with Gold Mirrors Heated Standard Stainless St…
In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone. Photoacoustic IR Analyzer(s) Highlights: Low Sensitivity (From ppb to Percent Levels) Yearly Calibration Minimal Maintenance Measures up to Five Gases + H2O Temperature and…
The CAI NOxBox system has been specifically designed for harsh environment condition s frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental effects. The sa…
The CAI Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special s…
This competitively-priced, single-channel dissolved oxygen meter is easy to set up and use while providing reliable, accurate DO measurement for water analysis and general laboratory applications. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indicators, salinity correction and automatic barometric pressure compensation—…
