Materials Products & Reviews

Agilent’s new Flip Top Inlet Sealing System is a device designed to allow the user to safely and reliably change an inlet liner in as little as 30 seconds without tools in a consistent leak-free manner. 

Agilent’s General Purpose Septa are made from an enhanced injection-molded silicone rubber material. 

Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a leak-free connection between the column and injector. Graphite ferrules can withstand temperatures as high as 450 °C.

Employing the easy release clamping design, these fittings offer a quick and simple solution to vacuum system design and assembly. Bakeable to 150º C when using Viton O-Rings, these fittings are ideal for roughing or high vacuum applications.

HTS and HTC PAL Valve Supplies   To better serve Agilent instrument users who choose CTC Analytics autosamplers for high-throughput and flexible sample introduction, Agilent has partnered with CTC to provide a fully integrated system, including CTC-approved valve supplies.Whether your HTS or HTC PAL autosampler uses the Agilent proprietary Rheodyne high-pressure 600-bar injection valve or Valco Cheminert injection valves, Agil…

Our Hydrocarbon Traps allow you to refill your trap and remove extremely low levels of hydrocarbons. Big Hydrocarbon Traps (BHT) are ideal for bulk purification applications or where several instruments are plumbed from a single gas source. Hydrocarbon Removal S-Traps are filled with 40/60 mesh activated charcoal and can be reconditioned. Capillary Grade Hydrocarbon Traps (HT3) feature extremely high surface area, are coconu…

 Our hydrocarbon/moisture traps offer you flexibility -- refill your trap and remove extremely low levels of both moisture and hydrocarbons.  

Agilent's Indicating Oxygen Trap is designed to be used in conjunction with any of our high capacity, non-indicating oxygen traps. When properly installed downstream from the non-indicating trap, the Indicating Oxygen Trap provides a visual indication of oxygen breakthrough before contamination reaches sensitive system components. Unlike adsorbent materials utilized in competitive products, our indicating media can be exposed…

Capture contaminants released by split injection systems   Split vent traps capture contaminants released by split injection systems. Remember to replace the split vent cartridges every six months.An internal split vent trap is factory installed to ensure the split vent line does not clog, creating system errors or expensive repairs.  Replacement cartridges are available. The optional external trap provides additional protecti…

  Agilent now treats each premium 11mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.

Bleed and Temperature Optimized Non-Stick Septa (BTO)   Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.

Oxygen/moisture adsorbents team up to give you two functionalities in the same trap. Unlike some oxygen/moisture traps, these traps are disposable. Consider the safety, performance, and cost advantages of the Agilent capillary grade oxygen/ moisture traps (0T3) when comparing to heated, catalytic traps. The Agilent OT3 Trap contains a highly active, metal-containing, scrubbing material in an inert, aluminum body. This materi…

Find supplies for the following Teledyne Tekmar purge and trap instrumentation

Agilent's QuickSwap Capillary Flow Technology module and pre-swaged fused silica tubing restrictors can increase the productivity of your Agilent 5973N and 5975 inert MSD systems, allowing you to change columns without venting the MSD. QuickSwap not included.

SilTite (Metal) Ferrules     Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. SilTite ferrules are used with Agilent Ultimate Union and other Capillary Flow Technology products, including the Purged Effluent Splitter (G3180B), Deans Switch device (G2855B), and QuickSwap Mass Spec Interface (G3185B).  

Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal to noise ration, increase column bleed, and even shorten column lifetime. Using a patent pending manufacturing process, our inlet gold seals eliminate tiny leaks from machining that can negatively impact your GC performance.

Agilent high-quality copper, stainless steel, and UltiMetal Plus tubing are manufactured and cleaned for chromatographic use. Agilent Tubing comes in different lengths and depending on your flow requirements, are available in 1/16 inch, 1/8 inch, or 1/4 inch. UltiMetal Plus tubing comes in 1/16 inch for inert environments.

Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. Graphite-Vespel ferrules can withstand temperatures as high as 280 °C.

Agilent has discontinued the line of Cary 600 series infrared microscopy (Cary 610-FTIR) and chemical imaging systems (Cary 620-FTIR). This includes the Cary 610 and Cary 620 Microscopes and Cary 660 and Cary 670 spectrometers and relevant accessories.

The Agilent C15 Component Leak Detector is a modular leak-testing package intended for applications in which the leak detector components are integrated into the system. It incorporates Agilent's Contra-Flow vacuum design, which maximizes the protection of its components from contamination in industrial applications. An optional color touch screen display is available for remotely showing all system status information and i…

The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup, self-test and calibration, the PHD-4…

The worlds fastest and most sensitive CCD detector           The Eos CCD is the fastest and most sensitive CCD detector for X-ray diffraction from Agilent or any manufacturer. With an active area of 92 mm diagonal and a gain of 330 e-/X-ray (Mo) the Eos is the highest sensitivity CCD detector available today. It is ideal for the most challenging experiments in small molecule crystallography, providing data collections faster…

Agilent J&W VF-WAXms is a high performance column for applications in the food, flavor and fragrance markets, and especially where trace analyses are required.

Agilent Deconvolution Reporting Software (DRS) for GC/MS is an application for target compound analyses that combines results from the Agilent MSD Productivity ChemStation, the NIST Automated Mass Spectral Deconvolution and Identification Software (AMDIS), and the NIST 2008 Mass Spectral Search Program (NIST08) into one easy-to-read report. 

The Agilent 55B AA is ideal for any laboratory requiring an entry level AA system with advanced capabilities. The double-beam 55B AA features an LCD screen and dedicated keyboard for simple, stand-alone operation. The 55B AA combines rugged, reliable hardware with an integrated software interface for fast, easy operation.