General Lab Products & Reviews

The Agilent DS40M 2 m3/hr rotary vane pump is a compact and quiet system. The pump delivers a pumping speed of 1.8 m3/hr at 50 Hz, or 1.3 CFM at 60 Hz, with a base pressure of < 7 x 10-3 mbar, while operating as low as 45 dBa. The 0.1 kW, single-phase motor is magnetically coupled to the pump shaft through an enclosed, leak-tight case, eliminating the consequences of pump oil leakage common to pumps with dynamic shaft seals…

MS120 is the roughing (foreline) pump of choice for LC/MS instruments, designed for high pumping speed, low power consumption, and high stability in the 10-2 mbar pressure range Due to the outstanding performance of this roughing pump, there is no need for multiple roughing pumps operating in parallel. The packaging and cart like design allow for a quick and easy installation. The pump is equipped with a built-in Quiet Cove…

Pipette Based SPE      Bond Elut OMIX pipette tips reliably purify and enrich femtomole and picomole levels of peptides and proteins prior to MALDI-TOF or LC/MS/MS. The unique monolithic sorbent technology used in Bond Elut OMIX consistently outperforms other tips by delivering uniform flow and strong analyte-to-surface interactions. Available in three formats, Bond Elut OMIX tips bind more peptides to deliver better sequence…

Compatible with 96-well plates from any manufacturer, the Resprep VM-96 is designed for performance and accuracy.

Low-level detection of carbon monoxide (CO) and carbon dioxide (CO 2 ) is critical for many applications. Restek’s methanizer (CH 4 izer) allows ppb-level determination of CO and CO 2  using a cost-effective GC-FID instead of more expensive instrumentation. The methanizer is factory set to 380 °C to ensure efficient and complete conversion of CO and CO 2  to CH 4 , but the operator can easily adjust the temperature as desir…

Single SOMAmer™ Reagents (SSRs) are synthetic, animal-free affinity reagents for protein detection workflows such as ELISAs and pull-down assays. With high specificity, thermal stability and batch-to-batch reproducibility, SSRs overcome common antibody limitations. Their small size improves epitope access, and with nearly 11,000 off-the-shelf reagents available, they enable faster, more reliable research.

TS split tube furnace range incorporates high-quality heating elements and innovative thermal insulation design to achieve first class performance while maintaining both reduced case temperatures and power consumption.

Pulverizing large sample quantities

Temperature control and regulation during the sample preparation process

Particle size analysis from 10 µm to 4 mm

The Planetary Ball Mill PM 300 is a powerful and ergonomic benchtop model with two grinding stations for pulverizing up to 2 x 220 mL sample material per batch.

Available from 1400°-1800°. Wide variety of sizes ranging from 3 - 35 litres.

Robust chamber furnace range available at 1100, 1200 and 1300°C. 5, 13 and 23 litre capacities. Good temperature uniformity

Rapid heating chamber furnace available at 1100 and 1200°C. 5, 13 and 23 litre capacities.

Extensive range of tube furnaces from 900°-1800°. Vertical, horizontal and split versions. Three zone versions available. Special models available on request.

Optimized for maximum recovery and sensitive DNA variant detection

Experience EVA Karl Fischer Titrators, where advanced engineering meets sophisticated software, designed to enhance precision and efficiency. Equipped with the Fast Forecasting Amperometric (FFA™) Algorithm and dSens M143 sensor, these titrators offer swift, accurate water content determination. The Swiss-engineered modular design caters to diverse lab needs, boosting throughput and accuracy.

All the essential functions you need for accurate micro-weighing results. 1.2/3.2 g capacity; 0.001/0.01 mg readability; small footprint; easy cleaning; large display; full visibility; Legal for Trade; WingDoor draft shield; LabX compatible.

Exceptional ease and speed. The Rainin MicroPro 20 96-channel semi-automated pipettor has a volume range of 2-20 µL and precision of 1-5 µL < 3% C.V. and 6-20 µL < 2% C.V.

The EVA C3 Coulometric KF titrator with a diaphragm generator electrode is ideal for measuring low water content of a wide range of samples. It simplifies handling challenging samples with external sample extraction and oven autosampler integration.

Combining the three main types of titrations: acid/base, precipitation, and redox, this instrument determines the most common parameters in food, beverage and chemical products.

The EVA V3 Karl Fischer titrator simplifies water content determination in various samples. It allows for homogenizer attachment and external sample extraction for challenging samples.

Excellence Weighing, Simplified

Affordable, portable 96-channel pipetting

Moisture analyzer test substance for performance verification.