Environmental monitoring and testing assess the quality of our air, water, soil, and overall ecosystems. Using advanced technologies and analytical methods, environmental scientists collect and analyze samples to measure levels of pollutants, contaminants, and other factors impacting environmental health. By monitoring changes over time and identifying potential risks to human health, this field plays a vital role in informing policy decisions and implementing effective mitigation strategies. Explore how environmental monitoring and testing contribute to safeguarding our planet's well-being and promoting sustainable development.
Eshmuno® A is a rigid, high capacity Protein A affinity chromatography resin for the purification of Fc-containing proteins, including but not limited to monoclonal antibodies. Eshmuno® A resin can be cleaned and sanitized under acid and alkaline conditions while maintaining high dynamic binding capacity at high flow rates.The Eshmuno® A resin contains a EMD Millipore proprietary ligand. This ligand is recombinantely expresse…
The PDS-100 is a Programmable Dispensing System which uses precision stepper motors to control FMI “Q” and “RH” pump models including STQP, STQ, STH, & STRH in all piston sizes. The FMI pumps are integrally mounted to the programmable controller. The controller contains the stepper motors and driver electronics, and is a rugged anodized aluminum design. Several single and dual pump configurations are available including a dua…
The One Solution for Your Dedicated QC Application
PiP Pumps micro π-petter - Pipetting, Syringing and Diluting Ideal for repetitive and volumetric dispensing of acids, solvents and aqueous solutions. Model "PiP" Precision Dilutor Features: FMI's unique low dead-volume pump heads, and synchronous motor drives. Can act as a single shot dispenser using the hand/foot switch or as a single metering pump in the continuous mode. Using a combination of forwar…
Ideal for Analyzers, Environmental Sampling & Injection, & Low Current Remote Battery Operation Model QBG Low Current DC Features: Ideal for extended 12/24 volt battery operation in remote locations. They are rated 60 RPM at 12 VDC and 120 RPM at 24 VDC. One Moving Part - NO VALVES! Low Current DC Operation Self Priming Patented CeramPump® Design
Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, the Fuel Oil Degradation Mix contains these compounds for retention time determination.
The demand for a more powerful and colder condenser has naturally arisen as the boundaries of evaporation science are pushed further and further. Users increasingly regard as critical the importance of having the right condenser for the job, with the correct power and temperature profile matched to the characteristics of the evaporator. Genevac has developed the super-powerful and super-cold SuperCool 75, in collaboration wit…
Solid Phase Extraction (SPE) is the basis of analytical laboratories. A crucial step of this process is sample preparation. Therefore we know that a clean sample will yield better results. To achieve this goal SiliCycle has designed SiliaPrep, which is a silica based sorbent exempt of fines, and SiliaPrepX, polymeric based sorbent, that can be found in cartridges, well plates and SPME (Solid Phase Micro-Extraction) cartridges…
With a choice of over 40 different phases (and we continue to develop additional, unique and powerful HPLC sorbents) our SiliaChrom series of HPLC columns surely has the reversed or normal phase you need for your application.Mostly made from a silica-based sorbent, we carefully monitor the manufacturing process, from raw material synthesis to packing, ensuring you that our HPLC columns are of the highest quality.All columns ar…
For two decades, SiliCycle has been dedicated to silica gel manufacturing and has achieved a strong know-how and recognized expertise in this field. Furthermore, to support the increasing demand of our spherical silica gels, we have developed and optimized a highly controlled, large-scale, production process for all our SiliaSphere products, without compromising silica quality. SiliaSphere silica gels are manufactured from a…
There is a growing need for applications in food and environmental areas able to cope with the analysis of a large number of analytes in very complex matrices. New analytical procedures demand sensitivity, robustness, effectiveness and high resolution with reduced analysis time. To improve the efficiency of traditional methods, a new sample preparation approach was developed. It’s called QuEChERS and it says it all: an acrony…
The MiniBlock® is an easy-to-use reaction block designed for parallel synthesis and screening. Its unique valve body design enables processes where filtration is critical, including solid-phase organic synthesis, use of scavenger resins with solution phase synthesis and parallel purification via Solid-Phase Extraction (SPE).Make the choice many chemists have made to increase productivity, more so than any other similar tool.…
Rigaku's WaferX 310 represents the culmination of 35 years of experience in the X-ray fluorescence analysis of thin films on silicon wafers. The WaferX 310 is ideal for measuring BPSG, PSG and metal films. In addition, thin film BPSG, multilayered circuit film, WSix, electrode films, ferrodielectric thin films, FRAM, next generation DRAM, and SiOF are standard applications for this tool.Highly accurate analyses for the ultral…
The Rigaku MFM310 performs high-precision measurements not possible by optical or ultrasonic techniques. Perform thickness, density, roughness & composition of films on blanket and patterned wafers. This sophisticated X-ray metrology tool makes it practical to perform high-throughput measurements on product and blanket wafers ranging from ultrathin single-layer films to multilayer stacks.The MFM310 is designed with high-volum…
Rigaku's unique AZX 400 sequential wavelength dispersive X-ray fluorescence (WDXRF) spectrometer was specifically designed to handle very large and/or heavy samples. Accepting samples up to 400 mm diameter, 50 mm thick and 30 kg weight, this system is ideal for analyzing sputtering targets, magnetic disks, or for multilayer film metrology or elemental analysis of large samples.Having the versatility to adapt to your specific…
The open path air monitoring system allows identification and quantification of airborne pollutants and atmospheric gases. Infrared radiation is modulated by an interferometer and transmitted to an array of retroreflectors positioned at a distance of typically several hundred meters. The reflected radiation is analysed for the target compounds. Due to the large spectral range, a wide range of compounds can be quantified sim…
The PMA 50 module has been dedicated developed for Polarization Modulation measurements. Both linear dichroitic measurement techniques like PM-IRRAS and circular dichroitic experiments like VCD spectroscopy can be realized using this accessory. It can be adapted to Bruker TENSOR and VERTEX FTIR spectrometers. All optic and electronic components in the PMA 50 module are optimized for the Polarization Modulation. Both…
CryoSAS is an automated high sensitivity FT-IR system for the quality control of solar and electronic grade Silicon according to international ASTM/SEMI standards. Although sample cooling to very low temperatures is required, CryoSAS operates without cryogenic liquids, is easy to use and optimized for the requirements of industry customers. CryoSAS combines Bruker's high performance FT-IR spectrometers with bui…
Thermogravimetric analysis (TG) follows changes in mass of the sample as a function of temperature yielding information of the various component amounts. Whereby identification of gases released during thermal treatment cannot be performed just by thermal analysis. Fourier-Transform-Infrared (FTIR) spectroscopy overs an excellent solution for the identification of unknown compounds. IR, a classical technique, depends upon t…
Bruker’s microplate extension HTS-XT allows the application of FTIR spectroscopy as method for high-throughput screening. This external module can be connected to different Bruker Optics FTIR spectrometers. Depending on its configuration it can be used for measurements in the mid infrared to the near infrared and even the VIS range. The sampling plates for the IR analysis correspond to the standardized 96- or 384-well mi…
The Thermo Scientific™ Acclaim™ Trinity™ P2 column is a high-performance, silica-based column specifically designed for separation of pharmaceutical mono- and multi-valent counterions by high-performance liquid chromatography (HPLC). This column was engineered for analytical chemists who need simple, robust, fast, generic methods. The Acclaim Trinity P2 columns provide an effective solution for counterion analysis using one co…
Your busy life science laboratory demands performance and flexibility — count on the Thermo Scientific™ BioMate 3S UV-Visible spectrophotometer to deliver. With stray light and noise specifications comparable to instruments two or three times the price, the new, compact Thermo Scientific BioMate 3S saves you valuable bench space. The BioMate 3S offers pre-programmed assay methods for nucleic acid and protein concentration as…
The GL SPECTIS 5.0 touch is a new compact-size laboratory grade spectrometer from GL Optic. Using this state-of-the-art instrument you can quickly gather UV-Vis-IR light measurement data with laboratory accuracy. The GL SPECTIS 5.0 touch is the best field application spectrometer to gather radiometric data with up to 6 hours battery life or can be adapted for use in complex laboratory setups where accuracy and precision matte…
The i-Raman® is unique for its high resolution combined with field-portability, with performance comparable to large bench-top Raman systems and weighing less than 7lbs The i-Raman® is equipped with B&W Tek’s patented CleanLaze® technology for exceptional laser stabilization and narrow linewidth. Other features include a spectral resolution as fine as 3cm-1, wide Raman shift coverage up to 4000cm-1, and a TE cooled 2048 pixel…
The i-Raman®EX is an extension of our award winning i-Raman portable Raman spectrometer featuring a 1064nm version of our patented CleanLaze® excitation laser Using a high sensitivity InGaAs array detector with deep TE cooling and high dynamic range, this portable Raman spectrometer delivers a high signal to noise ratio without inducing autofluorescence, making it possible to measure a wide range of biological samples.The i-R…
