Cannabis Testing Products & Reviews

Unleash analytical power with TIMS-XR technology: High dynamic range & analytical depth for cell & tissue analysis.

The VERITY Compact CPC System combines a PLC Purification System with a centrifugal partition chromatography (CPC) system for high-level target compound purification.

The VERITY® 3240 High Pressure Binary Gradient Pump is designed for semi-preparative to preparative purification. It provides an economical and compact pumping solution for preparative purification on 10 to 50 mm ID columns thanks to its large dynamic flow range up to 150mL/min. and pressure up to 420 bar (6090 psi).

RediSep Rf Gold C8 reversed-phase columns are packed with 20–40 µm spherical bonded silica, providing improved separation. Achieve near prep-HPLC results with greater sample recovery to easily purify up to gram-scale on your Flash system. Increased pore size optimized for purification of larger molecules like peptides and proteins.

ANATEL PAT700 TOC Analyzers are specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection.

Previously known as SolventTrapSVOC Solvent Recovery System

Automated sample preparation workstation for high volume samples  

SPE Disks for Water Extraction

Cleaning various items used in ultra-trace analysis work is a critically important laboratory routine. traceCLEAN assures best cleaning quality of your TFM, glass and quartz parts for ICP/ICP-MS accessories. Any trace metal contaminants stay within the reservoir and do not come in contact with the cleaned trace accessories. The cleaning process with the traceCLEAN takes about an hour, enhancing the overall lab workflow. 

ETHOS™ X microwave extraction line allows quick heating of the cannabis material for terpene isolation. Solvent-free extraction process takes only a few minutes and prevents any thermal degradation often noticed during use of conventional extraction methods. The fresh and characteristic taste of strain-specific cannabis is maintained, and high-quality terpenes are assured. The ETHOS X 2.0 is our latest generation of benchtop…

The Milestone subCLEAN is a compact and easy-to-use sub-boiling system, where all parts in contact with acids are made of high-purity fluoropolymers. Offering an optimal purification method for preparation of high purity reagents, our subCLEAN system is therefore suitable for HF, as well as for HNO3 and hydrochloric acid purification.

Sample preparation is a central part of elemental analysis and includes several manual and time-consuming steps. Reagent addition into digestion vials or vessels is a tedious and unpleasant process that requires a significant amount of time. The easyFILL Automated Dosing Station addresses these latter challenges using a single platform that ensures the automation of reagent addition and dilution, finally ensuring superior wor…

Proteinase K from Tritirachium album ELEVATE  

Proteinase K from Tritirachium album ELEVATE

The QuEChERS Clean-up step is rapidly completed using the QuICK QuEChERS cartridge. This self-contained cartridge contains 110 mg of anhydrous MgSO4 and 180 mg of PSA. Placed on the end of a disposable syringe, the QuEChERS extract is pushed through directly into a sample vial for analysis. Clean-up is equivalent to dSPE clean-up, but faster and easier, eliminating the need for centrifugation.

Pre-packed 6 ml anion exchange SPE cartridges are made to the exact specification of EPA Method 548 to assure high capture efficiency and consistent results for excellent analytical reproducibility.

Airborne laboratory contamination may interfere with solid-phase extraction results. This problem is easily prevented by using the Zero-Blank filter. Using an adaptor (included), this cartridge is fitted on top of the SPE cartridge during the drying step and captures potential contamination making results more accurate.

Clean, activated, and ready-for-use, 30 mesh copper granules remove unwanted elemental sulfur from pesticide and PCB extracts. Granules are much easier to use than copper powder or TBA and eliminate the need for toxic mercury.

Chlorophyll in QuEChERS extracts must be removed to reduce potential instrument downtime. This is removed from extracts using graphitized carbon black (GCB) Unfortunately, GCB also removes planar analytes reducing analytical accuracy. ChloroFiltr®, used in place of GCB in dSPE tubes, removes unwanted chlorophyll without removing pesticides or environmental analytes. No change in procedure are required.

When clean plastic cartridges are not clean enough. 6 mL glass SPE cartridges can be packed with your choice of UCT sorbent using PTFE frits and individually sealed in certified Mylar for purity.

Enviro-Clean 500mg/6mL cartridge PSDVB w/Polyethylene frits. It is used with EPA Methods 526, 527, 528, 529 and 8330.

Select pH Buffer Pouches - UCT has developed a line of premeasured “ready-to-use” phosphate and acetate buffer pouches. These pouches contain the correct quantity of reagent to quickly and accurately prepare buffers at the correct pH and concentration to simplify solid-phase extraction methods.

Styre Screen® Extraction Columns contain an ultra clean, highly cross-linked styrene and divinylbenzene copolymer. The Styre Screen particles have an average particle size of 30 microns and a very high analyte capacity making them ideal for standard solid phase extraction applications. The increased analyte capacity means that less sorbent bed mass is needed which results in faster flow rates and less solvent use. Higher th…

XtrackT® columns are gravity-flow SPE columns that allow for extraction of acids, neutrals, bases in viscous samples such as equine urine, post-mortem blood and tissues, amniotic fluid, and meconium.