888 Titrando/ 890 KF Titrando by Metrohm AG

"Titrindo 888 and the tiamo application are very helpful in combining nitrogen distillation and acid-base titrations, so as to speed up analysis results. The tiamo application is very easy to use and provides an easy-to-read data display. affordable prices and the best quality of instruments that made us choose metrohm"

"Fast, precise and durable"

"We are very satisfied with the instrument. We determine the water content of various solvents and artificial resins several times a day. The software is easy to use, but above all, it is reliable. Service services were not needed after several years. (Z inštrumentom smo zelo zadovoljni. Večkrat dnevno določujemo vsebnost vode v različnih topilih in umetnih smolah. Programsko je enostaven za uporabo, predvsem pa zanesljiv. Servisnih storitev po več letih niso bile potrebne.)"

"It is a tool capable of returning reproducible and reliable data. It is easy to use, thanks also to the specific analysis and data management software. The special medium-sized airtight container allows you to analyze very small samples (a few mg) as well as larger samples, with relatively short solvent preparation and conditioning times. The 803 Ti Stand magnetic stirrer and a 20 mL exchange unit are included in the scope of delivery. The supplier carries out an annual qualification on all our instruments and the Metrohm technicians have always offered a very helpful and quick response in case of problems"

"High quality product, good repetability of the results, versatile. Only i would prefer to have a digital display to monitor the potential stability."

"Metrohm instruments analyze results that are accurate, reproducible, and reliable. The instrument is easy to operate, clean, and maintain. The software is optimized for operation, ensuring compliance with EU-GMP for data integrity and the requirement for computer system validation in the EU-GMP. The service department is always ready to help when requested by us and equipment problems are always rectified by a Metrohm service engineer."

"It's very useful when we do titration test. I really like electrodes because of their sensivity."

"Our instrument is one of the most used pieces of equipment in the lab. It rarely gives us any trouble, and we can generally fix any problems ourselves. We have an annual service done by a technician who is resident in this state, which saves a lot of time and money for us. Help is always only a phone call away, so we don't need to have the device out of action very long. Excellent support from the local Metrohm guys! I would definitely recommend Metrohm to my colleagues in the wine industry."

"It is always a pleasure to contact Miguel Ángel Quesada from Metrohm Hispania to consult any incidence about an analysis. Lots of product and applications knowledge. Always a very quick answer. A product specialist who is really efficient and collaborative."

"Very effective and user friendly. Can handle large sample without worn out. The system software uses basic concepts and does not require technical knowledge for manipulation. Data obtained can be tabulated on a spreadsheet as a way for recording keeping for instance tracking the SDG 14. Does not require any unique consumables nor reagent apart from HCl which is readily available."

"Metrohm instruments are easy to use and the service from support and application was excellent"

"Excellent quality assay results received with high reproducible data"

"We are extremely pleased with the new titrator, as it offers the possibility of different methods. The instrument is user friendly. We like appropriate software too, because it offers much memory, traceability and a huge number of possible applications."

"The 888 Titrando/ Tiamo instrument is so user friendly as has a wide range of applications. The application notes given by tiamo makes analysis much more simple, and the precautions ensure that error is minimised/completely avoided. The metrohm team, especially Romola and Mpho are always willing to help no matter. They are so friendly and always offer the best advise whenever needed. Romola and the team are committed to great service and always put their special touch and extra effort in everything."

"We use it for several fuel analysis. Can't live without that. A visiting student liked it so much that they immediately bought it to his lab."

"Easy to use and reliable device"

"It's easy to use and the method setting is also easy."

"Essential equipment for the operation, from the MP. process monitoring, until the product is delivered."

"The device itself is easy to operate using Tiamo Multi software, although the method structure is not that simple, but with the support of your technicians everything worked! [Original text: Das Gerät selbst ist einfach zu bedienen mittels Tiamo Multi Software, allerdings ist der Methodenaufbau nicht so einfach, aber mit Unterstützung eurer Techniker hat alles funktioniert!]"

"I acutely want to comment on the after sale service. Backup service of Metrohm SA is EXCELLENT. Always willing to help. Either telephonically or willing to drive 300km to come and help. It is really heart warming to deal with Romola and her team. Extraordinarily great team!"

"Very effective product for my application with high quality and reproducible result."

"Very easy to use with hight accuracy results."

"It is very good and the errors are tremendously reduced compared to manual titration. However, there is high wear (due to chemical corrosion) of glass electrodes resulting in operational high costs."

"Easy to use and also software is user friendly. Result response is very fast"

"Excellent services and sales. Product has excellent performance with quality analysis. Repeatability is as per quality standard mentioned. We are always happy with your product quality. Your service is also excellent and on time."

"Good value for money, very good product that has never let me down. The service provided by Methrom for the annual maintenance of the device is also very exemplary. You can contact the Methrom service department at any time with problems and you will immediately receive constructive support in solving the problem."

"Easy to use, fast and relieable."

"This instrument has been working continuously for the last 8 years. The results are extremely accurate and the instrument is very user friendly. We have experienced minimum issues with this instrument. However, the few times that the instrument did need repairs, the Durban Metrohm branch was ever so helpful and always provided the best service. The accuracy of this equipment is trended daily on SQC charts using a certified reference standard. I highly recommend the use and purchase of this equipment to all that require great service and accurate results."

"Is not that easy, like all KF measurements. But doable."

"An untrained student is able to measure alone with an easy description and a short training by himself. The methods are easy to generate and to adjust to other units of measurement. If there are problems it is easy and fast to solve. Also if you need, you can call for technique support. You can change modules quickly with the titration compound. The older ones, which we have in the lab, can all be used. We use an Administrator with full rights and an User account with less options. This is a really usefull thing, because the methods are not lost all the time. Methods can be archived by the admin and not selected by the user. This is really good protection against doing something wrong."

"Very good support through supplier. Very good GMP conformity. Everything works fine. High level understanding from supplier."

"Easy sample handling, methods can be created very easily and quickly. Fast and accurate measurement!"

"Easy to use and reproducible. Slow responce of the controller touch 900."

"The equipment works correctly - knowing the % or ppm of humidity that plastics have is a marvel. Fast, agile and has an autosampler. It has several uses, since, in addition to measuring the % humidity per oven of plastics, we can also measure the humidity of liquids per cell, so the equipment is a 2 in 1 (in our case). It speeds up the tests of % of low humidity a lot, since in a conventional stove, you would make very big mistakes. This equipment has one less error in addition to that with the autosampler, it is only programmed to move vials and measure, it is very fast and efficient. The results are reproducible between replicates, and use of the equipment is also very easy and intuitive. The sales team that make the demo when we were acquiring the equipment are always available (by mail or phone, and even to visit you if necessary) and they solve your doubts and help with the creation of new methods for new tests ( in our case it was with liquids per cell). The ratings are so high because from minute zero we have been very happy with the team, they are always up to date and help you, and as I have already mentioned, it is a very easy to use piece of equipment and it is very good quality. Price is very good."

"Not dificult to use or make a full routine for the analytical procedure. High precision and robust."

"This is the best KF instrument in terms of cost/quality rate if you need to work in a GMP network. Easy to use and maintain, full traceable data, quick to setup. If you have some problems just ask to customer care for a quick solution."

"Products work well consistently. Very good quality accessories."

"This KF titrator is a very accurate instrument. it is very easy to handle. It takes a minimum amount of time to complete the activity. The results given by the instrument are very precise. Metrohm provided very fast service and sorted out problems in a timely manner. Instrument breakdown time is minimal. Service port for the metro is very fast. Instrument complies with 21 CFR part 11 for all conditions."

"Value for money. Very good service. Good post-sales support. User friendly interface, low maintenance and good quality equipment."

"I think that it is a really good device. Easy to use (in our case is a little more difficult because of the touch control (I hate it.). Next step for the next year is tiamo acquisition. It is a good looking instrument. I like its colors and the general presentation. The performance on daily work is good (4/5). The documentation generated for the qualification I think it is extremely long (should be reduced just for the important things)."

"KF Titeator is user friendly and it's compliant with USFDA 21 CFR part 11."

"We have used this product from Metrohm since 2011 and have recently added another 4 Titrando units to our Lab. This product is an excellent product to have as an individual titration unit used for acid buffering curve characteristics as well acid rock drainage/acid mine drainage samples to determine oxidation of the samples during time vs temp vs pH. We are extremely happy with our purchase and are going to add a few more in our lab soon. This is my first choice of instrument and always recommend to others."

"I have been using Metrohm 888 Titrando for 4 year. It is a very useful & reliable instrument. Very low maintenance. Comparing results from chemical analysis does not take long & results given are accurate. I feel so proud & happy to be able to rely on its results. Thanks to Metrohm."

"Using the 888 Titrando gives high quality results with good reproducibility. The machine is easy to use with comprehensive training received from the service provider. The Titrando can be set up to run a sample while the analyst is left to continue with other work. Any issues with the equipment are quickly and effectively dealt with by the expert technicians that are only a phone call away."

"Metrohm have very good products that are reliable and high quality. Accurate pH meters for lab & industrial applications and Metrohm KF and potentiometer are good instruments. These coulometric and volumetric titrators can be customized to your requirements and offer a wealth of options to make our work easier and safer. Optional software control, sample preparation and automation solutions, and many more are available for Metrohm products."

"Highly reproducible results and great performance. User friendly software and easy to handle the instrument. Service also highly appreciated, immediately responded online or physically to any query."

"It is a great instrument to work on. Need to improve tubing fitting for dosing in the vessel. It needs to be fixed properly."

"Reproducible results within different labs across the globe. easy to use with touch control. Comprehensive qualification procedure and appreciable after sales service."

"From use over the last 8 years, 888 Titrando has been very fast and produced accurate result with consistency. Also one thing I want to share is, initially we determined peroxide value using manual titrations like using burette, conical flask etc. and it is a very time consuming job and requires more concentration on it while analyzing. We asked Metrohm's service engineers if we could use 888 Titrando for peroxide value and he suggested using redox electrodes for peroxide value. He set up a method and configured it to analyse peroxide value with 888 Titrando. The result was amazing! I'm very thankful for your great service and the instrument."

"Both instrument and software are really easy to use and the learning curve is quite fast. Software is flexible and up to now we did not find any missing menu that should be implemented for our use. All was already present. In our lab we are using Titrando 890 to determinate the water content of solid flour based product raging between 8-20% moisture. We tried to analyze the samples directly but it takes a long time to extract all the water from these matrix. Often, analysis ended with a partial extraction as the last % point is released slowly. We found it easier and faster to pre-treat the sample to extract the water in a suitable solvent for the analysis. with this equipment, the analysis is completed in few minutes. Indeed, its a very usable instrument for moisture determination! We are thinking of implementing this machine with the external oven to analyze sample containing some interferences (such as hydroxides)."

"The system's results are easy to use and have good repeatibility for the test we performed."

"Metrohm instruments are top notch and worry free. Very easy to use and setup is a breeze."

"It's a very good product for determining the shelf life of finished pharmaceutical products."

"Very good in all the aspects! Service, ease of operation and readily available consumables and accessories."

"Metrohm titrando; a compact, reliable and very effective instrument. It has good repeatability- even with a small sample quantity. The titration vessel and electrode are efficient for tracing moisture levels. User friendly. "

"Excellent piece of equipment, with very compact, user friendly design. Software is 21 CFR Pt 11 Compliant and is very easy to use."

"The Salt Potentiometric method produces reliable results. Getting it set up and working took a lot of effort on our end and many phone calls. We are still working out kinks with the PV method. We are getting some support, but for the money we've spent, we would have liked to have done less leg work and development, particularly since we were told this was a routine analysis for this instrument."