Gas Chromatography Products & Reviews

The Select FAME column is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. The bonded column has an isothermal maximum operation temperature of 275°C and a programmed temperature of 290°C - a dramatic improvement of 50°C compared to non-bonded columns. Select FAME has better detection limits because the column has a very low bleed level. Even though this is a very polar column, the column efficienc…

Agilent J&W DB-5ms features an excellent signal-to-noise ratio for analytical applications. 

Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity.

Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. 

CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.

Agilent J&W CP-Sil 88 for Dioxins has a very high polarity and a specific selectivity for dioxin and dibenzofuran separations. The column is supplied with an integrated retention gap to avoid problems with solvent condensation, thus allowing repeated splitless injections without phase deterioration, extending column life. 

Agilent J&W DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents.

Introduce volatile compounds from virtually any sample matrix into your GC or GC/MS. Automatic Leak Check, Priority Sample Positions, and Barometric Pressure Compensation improve uptime and efficiency.

Dependable leak-free capillary connections allow reliable backflush, split flow, heart-cutting, and GC x GC on Agilent 8890 and 7890 GC systems. These devices are low thermal mass, oven mountable, and inert.

Based on the Agilent 990 Micro GC, this Natural Gas Analyzer offers fast analyses with with easy-to-use software and the ability to calculate all required physical properties.

Agilent has what you need for precise, effective, sample delivery from your GC autosampler. 

Agilent’s Ultra Inert Inlet Liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface. These liners are recommended for trace level analysis of active analytes. Liners with inert wool retain non-volatiles, prolonging column life and lowering frequency of MS source maintenance.

Agilent offers a complete line of liners for your Agilent GC splitless inlet. Agilent’s proprietary deactivation is important for splitless liners because of the longer sample/liner contact in splitless mode.

Autosampler and Manual Syringes   For exacting measurement, transport and delivery of liquids necessary for sample preparation and injection, specify Agilents full suite of manual and autosampler syringes.  Designed for accuracy, reliability and ease of use, Agilent syringes enhance productivity and performance through every step of your sample processing.

The Agilent Gas Clean Filter System delivers clean gases, reducing the risks of column damage, sensitivity loss, and instrument downtime. Inserting a Gas Clean Filter System in the gas line immediately before the instrument inlet greatly reduces the level of impurities, thus improving trace analysis. 

Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. Graphite-Vespel ferrules can withstand temperatures as high as 350 °C.

Many of Agilent’s manual syringes have color-coded barrels to facilitate volume selection while making life in the lab more colorful. For fast, easy identification, each denomination (0.5 µL to 50 mL) features a distinct color boldly embossed on the glass barrel.

Liners are sealed in the inlet with O-rings or graphite seals. 

Agilent CrossLab is a growing portfolio of GC supplies manufactured to perform seamlessly with the non-Agilent GCs in your lab. From autosampler syringes to autosampler vials, Ultra Inert inlet liners to non-stick liner O-rings, capillary column ferrules to column nuts, vials, caps, septa, and more. Experience the same Agilent quality solutions you know and trust, now for your non-Agilent GCs: PerkinElmer GC Systems…

Agilent ® J&W™ DB-5ms and HP-5ms Ultra Inert deliver industry-leading analytical performance in a range of chromatographic applications. Very low bleed characteristics and excellent signal-to-noise ratio and peak shapes, enables high levels of performance in analyzing challenging active analytes. DB-5ms  and HP-5ms Ultra Inert are also individually tested with a demanding Ultra Inert test probe mixture, to deliver consistent…

Agilent J&W DB-1ms and HP-1ms Ultra Inert deliver consistent column inertness performance to ensure sensitivity, performance, and integrity. With excellent peak shapes, exceptionally low bleed and high signal-to-noise ratios, DB-1ms and HP-1ms Ultra Inert perform effectively with even the most challenging active analytes.

The Agilent Large Valve Oven (LVO) for 8890 and 7890B GC systems is a versatile, high-capacity external oven that can be configured to support complex, multi-valve GC applications without taking up any bench space.

Specifically designed for fast gas chromatography, higher productivity, and improved ease-of-use through its ballistic column heating. Never do column maintenance again with click-and-run connections. Built-in intelligence further increases productivity and usability.

The 8890 Gas Chromatograph system meets specific analysis demands with speed, accuracy, and reliability. Built-in intelligence, 6th-generation electronic pneumatic control (EPC), and a unique browser interface that lets you monitor your system from home, office, or remote location increase productivity and uptime.

The 8860 Gas Chromatograph (GC) System is the standard for routine GC analysis. Dependable and robust, the system offers new levels of performance, reliability, built-in intelligence, and cost-effectiveness.