Get Optimal Size-Reduction with Minimal Cleaning Effort

Ideal for size reduction of soft to medium-hard, tough-elastic and fibrous materials as well as for heterogeneous mixtures. They are indispensable in the areas of food, pharmaceutical industry, plastics, agriculture, forestry, construction materials, textiles, chemistry and as well as for analytic and sample preparation for RoHS-analysis.

Unmatched ease of cleaning

A particularly important criterion for a Cutting Mill is the question how fast and easy it can be cleaned in daily laboratory use. Therefore, we have placed particular value on the easy cleaning when we developed the FRITSCH PULVERISETTE 19.

While you are still tightening the screws on other mills, your FRITSCH Cutting Mill is already clean!

Because the entire grinding chamber can be opened easily in seconds and both the rotor and the sieve can simply be removed with simple motions. Only at FRITSCH Cutting Mills it is possible to lift open the entire top part of the housing as well as the door – in fact, the door can be completely removed. And that’s not all: The rotor of the FRITSCH Cutting Mills can be removed easily without tools for quick cleaning in between and it can be turned by hand, when the mill is open.

The result: a completely open and empty grinding chamber with minimal dead space for easy and quick cleaning – a secure protection against cross contaminations!

NEW: Universal Cutting Mill PULVERISETTE 19 - in a corrosion-resistant stainless steel version 316L

Especially for applications in the food and pharmaceutical industry.

Advantages

• Increased resistance to corrosive media such as alkalis and acids, but especially to chloride containing media
• FDA compliant (Food and Drug Administration), as well as to regulation (EC) Nr. 1935/2004 of the European Parliament according to article 3, paragraph 1, compliant material in the food and pharmaceutical industry
• Combines above this, the well-known advantages of the PULVERISETTE 19 standard version, such as handling and cleaning
• Can be combined with the NEW Sample exhaust system with high-performance cyclone separator made of stainless steel 304. It ensures with its powerful vacuum function, based on negative pressure a simple feeding, fast throughput and good cooling and is especially recommended for analytical requirements.

More info at www.fritsch-international.com/p-19204000/

By the way:

FRITSCH offers 6 different models of Cutting Mills, with max. feed sizes from 70 x 70 mm – 120 x 85 mm, max. throughput from 50 l/h up to 85 l/h, final finesses from 0.2 – 20 mm and rotational speeds from 300 – 3400 rpm – for each application the perfect Cutting Mill!

Practical application examples as well as comparison grindings can be found online at www.fritsch.de in the area SOLUTIONS.

Test the FRITSCH CUTTING MILLS!

Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself!

You can view both videos at:

Video: How the FRITSCH Cutting Mills work

Video: Cleaning of FRITSCH Cutting Mills – fast, easy, safe!