Search results for "flow cytometry"

Technical Advantage: Lower documented Endotoxin content than offerings from other major suppliersLymphocyte Separation Medium (LSM) was originally designed for the in vitro isolation of lymphocytes from diluted whole blood. It is a sterile, iso-osmotic polysucrose and diatrizoate solution with low viscosity and a density of 1.077-1.080 g/ mL at 20ºC.- Complete Certificate of Analysis available for each production log, along wi…

The FTS Bio-Cool is the most reliable, safe, and easy to use controlled rate freezer for cryopreservation. Typical applications include cryopreservation of human and animal embryos and biological tissue and cell lines. The Bio-Cool is the only controlled rate freezer that does not require expendable liquid nitrogen and the associated pumping, re-filling, and storing of a high-pressure liquid. The Bio-Cool, simply plugs into a…

This new type of TMB with a red indicator combines all the important qualities of TMB ONE, eliminating possible mistakes during pipetting. Further the red colour may be useful in automatic analyzers giving the warning "Reagent low" when it is time for filling up the substrate.The red indicator disappears after addition of the stopping solutionand will neither affect the sensitivity nor the stability of the substrate. Stability…

VICI AG uses proprietary liquid phase processing to produce low bleed characteristics while maintaining identical retention characteristics to the phases you are used to. These processes combined with proprietary coating, curing, bonding, and crosslinking produce MS-certified bleed characteristics equal to the best. Improved upper temperature limits enhance column "bake out", reducing sample carryover and cycle times. ValcoBon…

The TaqMan® Custom Array is a 384-well micro fluidic card that enables a researcher to perform 384 simultaneous real-time PCR reactions without the need to use liquid-handling robots or multichannel pipettors to load. This low- to medium- throughput array allows for 1-8 samples to be run in parallel against 12-384 TaqMan® Gene Expression Assay targets that are pre-loaded into each of the wells on the array. The TaqMan Custom…

The Kem-En-Tec Diagnostics’ AP-StabilPLUS™ is a BSA-free, cost-effective and robust Stabilizer giving superior stabilization of AP-conjugated proteins in low as well as high protein dilutions. This stabilizer prevents loss of AP activity and maintains conformation of the protein. The AP-StabilPLUS™ allows the manufacturer of diagnostic assays to provide pre-diluted ready-to-use enzyme conjugates in the kit. The diluted AP-conj…

The models LISAS ZA are designed to supply any analytical application that require this purity and outflow of ZA. This model is to be used exclusively in a laboratory environment. With this generator the customer will never be closest to his Zero Air production.  Compressed Air passes throughout a hot catalytic chamber to remove CO, CH4 and HC. After the purification process, Air is filtered of remaining particulates down t…

Moisture Research in a BoxFor food or pharmaceutical scientists, moisture sorption data can make or break a product. The AquaLab Vapor Sorption Analyzer (VSA) introduces simplicity, control, and affordability into the process of gathering moisture sorption isotherm data. Before you learn about our product, you might be interested in:- Why isotherms are important- 2 other ways people measure moisture sorption- 5 examples of h…

RayBiotech's semi-quantitative, high-density arrays allow you to quickly screen for biomarkers, PTMs, and other targets across 8000 human, 2808 mouse, 1500 rat, 50 porcine, 30 bovine, or 500 rabbit proteins - or we can create a custom array to meet your project needs.

We maximize your product’s lifespan and field reliability through comprehensive post-launch support. Our services include aftermarket repair, refurbishment, and strategic product lifecycle extension (redesigns for obsolescence). This maintains performance and ensures global distribution and inventory management long after the product leaves the factory floor.

These 1L PYREX® distilling flasks are used are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 5 rubber stopper.

These 25 mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

These 250 mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 3 rubber stopper.

These 50 mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

These 500 mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 4 rubber stopper.

These PYREX® 1L flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

These PYREX® 250 mL flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

These PYREX® 2L flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 12.5mm.

These PYREX® 4L flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 12.5mm.

These PYREX® 500 mL flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

The 1290 Infinity III Multicolumn Thermostat (MCT) is a UHPLC column oven that provides precise temperature control over a broad temperature range with cooling to 20 degrees below ambient and heating up to 110 °C. The MCT's column compartment houses up to eight columns.

Powered by global analytics leader TIBCO® Spotfire® , Revvity Signals solutions provide a holistic view across all your clinical data. Interactive visualizations and predictive analytics allow Clinical Development teams to rapidly explore clinical data for proactive and responsive decision making, in near real-time.

Corning 1536-well microplates are our highest density microplates available for high throughput screening. The microplates conform to standard microplate footprint and dimensions. These microplates are offered in solid black and white polystyrene, with round or flat bottoms, and in black-clear bottom formats.Total well volume of 10 μL for round well microplates and 12.8 μL for flat bottom microplatesRecommended working volume…

Corning 1536-well microplates are our highest density microplates available for high throughput screening. The microplates conform to standard microplate footprint and dimensions. These microplates are offered in solid black and white polystyrene, with round or flat bottoms, and in black-clear bottom formats.Total well volume of 10 μL for round well microplates and 12.8 μL for flat bottom microplatesRecommended working volume…

Corning 1536-well microplates are our highest density microplates available for high throughput screening. The microplates conform to standard microplate footprint and dimensions. These microplates are offered in solid black and white polystyrene, with round or flat bottoms, and in black-clear bottom formats.Total well volume of 10 μL for round well microplates and 12.8 μL for flat bottom microplatesRecommended working volume…