Search results for "kings college london"

(This is the suggested replacement for 3705) White wall plates are designed to reduce well-to-well crosstalk during luminescent assays Recommended working volume of up to 20 to 80 µL Enhanced flatness provides low intra- and inter- plate CV's. Conforms to standard microplate footprint and dimensions Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interact…

May be used in a variety of laboratory assays Flat bottom strips are designed to easily break apart and are pre-assembled in an style strip holder that allows each individual well to be positioned back into the plate once broken White wells enhance luminescent signals, have low background luminescence and fluorescence, and prevent well-to-well crosstalk High binding surface binds medium (>10kD) and large biomolecules that…

May be used in a variety of laboratory assays Flat bottom strips are designed to easily break apart and are pre-assembled in an style strip holder that allows each individual well to be positioned back into the plate once broken Black wells have low background fluorescence, minimal light scatter and reduced crosstalk High binding surface binds medium (>10kD) and large biomolecules that possess ionic groups and/or hydropho…

(This is the suggested replacement for 3677) Square well top for easier robotic pipetting Round bottom for better Z factor and minimized trapped air Conical well molded in the shape of a light cone for efficiency Recommended working volume of 2 to 20 µL Black walls reduce well-to-well crosstalk and autofluorescence during fluorescent assays Not treated (or medium binding) polystyrene surface is hydrophobic in nature and…

(This is the suggested replacement for 3674) Square well top for easier robotic pipetting Round bottom for better Z factor and minimized trapped air Conical well molded in the shape of a light cone for efficient Recommended working volume of 2 to 20 µL White walls reduce well-to-well crosstalk, enhance luminescent signals and have low background luminescence and fluorescence Not treated (or medium binding) polystyrene su…

This Corning® kit is similar to No. 6949E, as many of the same standard laboratory experiments can be performed with this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. Note in particular the inclusion of a 250 mL flask with side tubulation, which is useful when performing steam distillations or experiments requiring an air bleed. This kit contains a three neck boiling flask to enable…

(This is the suggested replacement for 3789) Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable primarily for the immobilization of large molecules, such as antibodies, that have large hydrophobic regions that can interact with the surface Untreated microplates have a binding capacity of approximately 100 to 200ng IgG/cm2 Without lids…

Discontinued: 351130; Suggested Replacement: 351131.The Falcon 96 Multiwell Insert System is a cell culture insert platform suitable for both manual and robotic screening of compounds in cell-based assays.Storage: Store at room temperature, away from direct sunlight.Automation compatible designFormat compatible with most robots and fluid handling instrumentsComplete sample recoveryThe Falcon 96 Square Well, Angled-Bottom Plate…

AA's range of AOTF (acousto-optic tunable filters) are used extensively in confocal microscopy applications. Having pioneered the development of the AOTF in response to the needs of early developers Amos and White, AA offered the first commercially available devices for OEM applications. Photon Lines are still supplying Confocal manufacturers with such devices, and their ruggedness and reliability result in virtually zero retu…

AA's range of AOTF (acousto-optic tunable filters) are used extensively in confocal microscopy applications. Having pioneered the development of the AOTF in response to the needs of early developers Amos and White, AA offered the first commercially available devices for OEM applications. Photon Lines are still supplying Confocal manufacturers with such devices, and their ruggedness and reliability result in virtually zero retu…

Thar's SuperReactor/Extractor systems are built to enable the user to rapidly react multiple compounds with supercritical CO2, video record it occuring, then extract materials of interest. The user can operate in a static, pressure control mode or a dynamic flow control mode. No other company in the world produces off-the-shelf, automated SFR/SFE kits for use in pharmaceutical, chemical and food research laboratories. Superc…

The DRG PMSG ELISA is an enzyme immunoassay for the semiquantitative in vitro measurement of Pregnant Mare Serum Gonadotropin (PMSG) in equine serum and plasma.DRG develops and manufactures diagnostic ELISA test kits for use in clinical and research laboratories. The experience of our production team and management team guarantees to provide high quality products, competitive prices and excellent customer service. Please refe…

Save valuable lab space with Thermo Scientific™ MaxQ™ 8000 Incubated Stackable Shakers, designed to be stacked two to three high on the floor without sacrificing performance. These stackable shakers have the durability to run at top speed stacked three-high, contain a HEPA filter that ensures the air inside the chamber remains clean and reduces cross contamination, feature a slide out platform that provides convenient 100% sa…

The piccolo™ is a compact wiping seal dispenser for dispensing small quantities of liquids. Made from high quality materials, its small size and semi-automatic operation make it a natural for standardized procedures and kits where small volumes of reagents need to be dispensed. The spring loaded piston design enables one-handed operation, and the discharge tube can be rotated over 360° so that it is always optimally situated w…

An easy way to assess tag accessibilityThe production of fusion proteins often raises the issues not only of their structural integrity after isolation, but also of the accessibility of the associated tag. In the case of GST or 6HIS tagged proteins, this verification can be achieved with HTRF® GST and 6HIS check kits. These two assays are competitive immunoassays in which the anti-GST or anti-6HIS Cryptate conjugates bind dire…

microVISC is the fastest viscometer for your routine viscosity measurement. The viscometer is intuitively designed so that users can start operating within a minute. It employs RheoSense's patented Viscometer/Rheometer-on-a-Chip (VROC) technology and offers accurate and repeatable viscometry measurements, using sample size as small as 100 micro liters. Battery-operated and portable, microVISC can be deployed at any laboratory…

ChIP, ChIP-seq, and methyl antibodies for stem cell studies. In recent years, studies suggest that the mammalian genome undergoes various epigenetic modifications during development and embryonic stem cell (ESC) differentiation. Understanding the mechanisms that control these epigenetic signals is essential in deciphering stem cell biology and the patterns of gene expression during cellular differentiation. ESC gene express…

This family of kits provides ultra-sensitive, non-radioactive quantitation of cyclic adenosine monophosphate (cAMP) in cell lysates. - Accuratelly detect less than 60 femtomoles of cyclic adenosine monophosphate (cAMP) in cell lysates. - Grow cells and run the assay in the same plate, eliminating loss of cell lysates from transferring (cAMP-Screen Direct™ System only). - Reduce interference from test compounds and improve CVs…

R&D Human TGF-beta 1 Quantikine ELISA Kit - Human TGF-beta 1 Immunoassay for the quantitative determination of activated human Transforming Growth Factor beta 1 (TGF-beta 1) concentrations in cell culture supernates, serum, plasma, and urine. The Quantikine TGF-beta 1 Immunoassay is a 4.5 hour solid phase ELISA. The TGF-beta 1 Quantikine ELISA contains recombinant human TGF-beta1 expressed by CHO cells and has been shown to q…

These heavy duty 10L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. Bottles have permanent white enamel graduations and marking spots.Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as b…

These heavy duty 100 mL square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, o…

These heavy duty 1L square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, one-p…

These heavy duty 250 mL square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, o…

These heavy duty 500 mL square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, o…

These heavy duty 10L PYREX® round bottles are manufactured from low actinic glass for use when storing or transporting light sensitive materials. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring.. Bottles have permanent white enamel graduations and marking spots.Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in o…