Search

D.E.N.* epoxy novolac resins are thermosetting plastic materials that provide good strength and chemical resistance at high temperatures. Because of this, these products offer formulators and fabricators excellent value as an alternative to bisphenol-A based epoxies and phenolic resins. The thermal stability of DOW Epoxy Novolac resins allows their application as adhesives, structural and electrical laminates, coatings and…

High-quality microplates from Greiner Bio-One

Matrix Tech. Corp. introduces a single-channel, non-contact dispense system to the Hydra II line of automated pipettors.  The eDrop nanoliter dispense technology is ideal for transferring precious samples via non-contact dispensing.  This technology is the ideal solution for forensic genotyping, low volume PCR in 96 and 384 formats, preparing protein crystallography plates, and serial dispenses for dose response curves. The…

A distinctive, lightweight, portable 2D and linear barcode reader, the VisionMate One Wireless reader employs Bluetooth® wireless technology.  Ideal for satellite locations or fieldwork, this versatile single tube reader provides secure data transmission between the reader and a computer or PDA, and is compatible with virtually any database.  The VisionMate One Wireless has a range of 100 meters (longer than a football field…

A new 500ul 2-D Barcoded Tube and rack system for sample storage and tracking is now available from Matrix Technologies.  The new 500ul storage tube has a maximum working volume of 300ul and features a “v” bottom design for maximum sample recovery.  A permanent unique 2D bar code is laser etched on the bottom of each tube.  The Microplate footprint, robot-friendly rack comes with a unique locking lid for secure shipping and st…

The Mosaic Handheld is a new smart platform for designing a custom portable intrument. It is ideal for prototyping and manufacturing portable instruments for data logging, inventory management, data acquisition, sensor calibration, and scientific instrumentation. “When designing a new portable device, the job of integrating the battery charger, switching power supplies, user interface, embedded computer and board-to-board int…

175cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterile Nonpyrogenic

The miVac DNA is an ideal small concentrator for the molecular biology laboratory. A centrifugal concentrator capable of removing water and organic solvents from a variety of sample formats including tubes, microplates and vials. Making it an ideal "work-horse" concentrator for the busy lab. The built-in special runs for working with water and water mixtures improve performance and optimise concentration time and make the m…

miVac is a range of centrifugal vacuum concentrators and freeze driers capable of removing water and organic solvents from a variety of sample formats including tubes, microplates, and vials. miVac concentrators come in 2 sizes, the smaller Duo and a larger Quattro. There is a choice of vacuum pump and rotor according to application and sample format.  To speed concentration built-in special runs for working with water and…

miVac oil free vacuum pumps can be used with miVac vacuum concentrators or stand alone for use with other suitable vacuum applications in the laboratory. There is a range of three pumps available: Duo pump, 10mbar PTFE diaphragm pump, 38 litres per minute flow rate. Quattro pump, 1mbar PTFE diaphragm pump, 17 litres per minute flow rate. Supoerl pump, 0.3mbar scroll pump, 83 litres per minute flow rate.

Unique frost free cold trap - the miVac SpeedTrap does not need  defrosting, all solvents (including water) collect as liquids and can be eaily emptied - collection jar is simply removed by quarter turn. The miVac SpeedTrap is compact, requiring little bench space and suitable for use with a wide range of solvents, from volatile organic solvents through to water and some of the higher boiling point solvents. The SpeedTrap i…

Double-beam, variable wavelength capability Programmable wavelengths: 190 - 900 nm East-to-use Control Pad Available Lamp startup/shutdown Pre-aligned lamps for easy changeover Remote autozero capability Optimized for use with ESA Coulometric electrochemical detection Low noise and low drift for increasing sensitivity and stability in analyses. The Model 526/528 detectors provide extremely low operating noise levels…

A low volume electrochemical cell optimized for the low flow rates of electrospray ionization mass spectrometry (ESI-MS). • Optimized for incorporation into low flow rate LC-MS applications • Provides high efficiency electrochemical conversion with minimal peak dispersion Proven Coulometric DesignThe Model 5030 Cell utilizes the proven porous graphite flow through design pioneered by ESA and is optimized for incorporation…

Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable primarily for the immobilization of large molecules, such as antibodies, that have large hydrophobic regions that can interact with the surface Binding capacity of approximately 250 ng of mouse IgG/cm2 EIA/RIA plates are tested on lot-to-lot basis and the certification results for ea…

Spray particle and spray droplet size measurement

Manufactured from optically clear polystyrene Threaded plug seal caps prevent leakage Treated for optimal cell attachment Tubes supplied racked in foam tray Sterilized by gamma radiation and nonpyrogenic Max RCF of 1,400xg

The Tube Formation BioApplication is an image analysis module that easily and reliably quantitates angiogenic tube formation in vitro.  It  identifies tubes based on morphological properties, and measures number, tube size (area), and other features of tubes in cell cultures.  This BioApplication calculates and reports reports number of connected vs. unconnected tubes, number of nodes (branch points), and angiogenic index.  T…

Experience Automation Your Way. The Microlab STAR Line automates liquid handling tasks from simple to complex with exceptional precision and flexibility so that you can increase throughput, reduce errors, and gain confidence in results.

Meet your lab's specific needs with outstanding flexibility and performance with the easy-to-use Thermo Scientific™ Multidrop™ Combi SMART + Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories.

With the extended use of multichannel pipettes in the laboratory, the standard recommends that every channel is regarded as an individual pipette and should be assessed/calibrated as such.

A full range of Rotor Stator Homogenizers from PRO Scientific

Polyethersulfone (PES) membranes provide the fastest flow rates, the lowest protein binding and low extractables and are best for filtering cell culture media. 250 mL receiver bottles feature easy grip sides for improved handling. Additional storage bottles can be purchased to increase capacity. Bottle caps are supplied sterile and individually packaged. - Angled hose connector simplifies vacuum line attachment. Individ…

The pDual and pDual GC expression vectors are designed for high-level expression of heterologous genes in both eukaryotic and prokaryotic systems.High-level protein expression in bacterial or mammalian systems Saves time by eliminating the need to subclone Express protein as a native or tagged fusion protein Epitope tagged for simple detection and affinity purification Clone seamlessly without compatible restriction sites Avai…

FireWire 800, FireWire 400, Hi-Speed USB 2.0 50% faster than 1st generation FireWire 800 drives* Ultra-quiet, heat dissipating design Stack, rack-mount or stand upright Combining all of the leading interfaces into one drive, the LaCie d2 Hard Drive Extreme with Triple Interface now also comes in higher capacities to handle your most demanding projects and storage needs. It can be easily shared among multiple users and environm…