miVac is a range of centrifugal vacuum concentrators and freeze driers capable of removing water and organic solvents from a variety of sample formats including tubes, microplates, and vials. miVac concentrators come in 2 sizes, the smaller Duo and a larger Quattro. There is a choice of vacuum pump and rotor according to application and sample format. To speed concentration built-in special runs for working with water and…
6 boreholes for different tubes (max. tube size: 85 ml) Max. rotational speed: 11,000 rpm (max. rcf: 15,550 x g) When used in Centrifuge 5810 R: max. rotational speed 12,000 rpm (max. rcf: 18,500 x g) Conical tubes such as 15 ml and 50 ml Falcon® tubes can be centrifuged with adapters in the fixed-angle rotor1) Rotor, caps, adapters are autoclavable (20 min, 121°C) 1) Please observe the limits for tube load-bearing…
Aluminum rotor available with 10 or 30 steel sleeves depending on number of samples Centrifugation of 15 ml Falcon® tubes and glass test tubes Inserts supplied allow symmetrical heterogeneous loading Max. speed of 4,400 rpm (max. rcf of 2,750 x g) ®: Registered trademark of Becton Dickinson
4 x 100 ml rectangular buckets for high capacity Flexible adapters for a wide range of tubes Max. rotational speed: 5,000 rpm (max. rcf: 4,500 x g) Caps for aerosol-tight centrifugation* Rotor, buckets, caps, and adapters are autoclavable (20 min, 121°C) Also available with four buckets for conical 50 ml tubes * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.
All-in-one rotor cross for 4 x 250 ml rectangular buckets and 4 microtiter-plate buckets Flexible adapters for a wide range of tubes Swing-bucket rotor with rectangular buckets: max. rotational speed: 4,000 rpm (max. rcf: 3,200 x g) Rotor, buckets, rectangular buckets, caps, and adapters are autoclavable (20 min, 121°C) Caps for aerosol-tight centrifugation* * Tested by the Centre for Applied Microbiology & Research…
Swing-bucket rotor A-4-62 can be up-graded with 4 MTP buckets to the MTP rotor A-4-62-MTP For up to 16 microtiter plates or 12 culture plates or 4 deepwell plates Swing-bucket rotor with microtiter-plate buckets: max. rotational speed: 4,000 rpm (max. rcf: 2,750 x g) * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.
Swing-bucket rotor A-4-81 can be up-graded with 4 MTP buckets to the MTP rotor A-4-81-MTP For up to 16 microtest plates or 12 culture plates or 4 deepwell plates and all plate stacks of the Perfectprep® Plasmid Kit The functional range in comparison to the A-4-81 MTP can be expanded upon with flex buckets Swing-bucket rotor with microtest plate buckets: max. rotational speed: 4.000 1/min (max. rcf: 2.900 x g)
Cluster tubes are composed of 1.2 mL 96 individual polypropylene tubes are designed to fit in a standard 96 well microplate format Does not include rack Polyethylene tube caps are available in 8-cap strips (Corning No. 4418)
Cluster tubes are composed of 1.2 mL 96 individual polypropylene tubes in a 96 well microplate rack with lid Polyethylene tube caps are available in 8-cap strips (Corning No. 4418)
These Costar® 0.65 mL microcentrifuge tubes are made of colored polypropylene and are RNase-/DNase-free. Rainbow pack includes one bag each of blue, green, yellow, red and orange tubes. Supplied nonsterile and are autoclavable External graduations and frosted writing spot for easy sample identification Positive seal design allows for repeated opening and closing Flat cap surface for convenient labeling Withstands a maxim…
Corning® 15 mL clear polyethylene terephthalate (PET) centrifuge tubes have traditional polyethylene plug seal caps and are packed 50 per rack. Please check our Technical Information Listing for information on the physical and chemical properties of Corning plastic centrifuge tubes as well as important suggestions for safe use.Black printed graduations and a large white marking spotMaximum RCF is 3,600xgSterile, certified nonp…
Cluster tubes strips are composed of eight 1.2 mL polypropylene tubes in strips arranged in a 96 well microplate rack with lid Polyethylene tube caps are available in 8-cap strips (Corning No. 4418)
Micro test tubes with caps made of HDPE for Cobas Bio® and Cobas Mira® automatic analyzers. Available in four colours. Manufacturer references:(Codes) Art. 2940-00, 2940-04, 2940-06, 2940-13.
Ideal for samples analysis. Depending on centrifuge being used, these tubes can withstand a centrifugal force of up to RCF 11.000 max. Flat cap with writing area. Available in: neutral, blue, yellow, pink and green colours.Manufacturer references:(Codes) Art. 279.
Corning® 2 mL polypropylene microcentrifuge tubes feature screw caps that provide a tight secure seal. Unattached rim seal cap Withstands a maximum RCF of 20,000xg Sterile
Corning® 15 mL clear polyethylene terephthalate (PET) centrifuge tubes have traditional polyethylene plug seal caps and are bulk packed 50 per bag. Foam racks can be purchased separately. Please check our Technical Information Listing for information on the physical and chemical properties of Corning plastic centrifuge tubes as well as important suggestions for safe use.Black printed graduations and a large white marking spotM…
(This is the suggested replacement for 431650)Corning® 15 mL clear polypropylene (PP) centrifuge tubes come with the advanced polyethylene CentriStar™ caps and are packed 50 per rack. The CentriStar™ Cap has a easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design for easier gripping. This leak-proof design comes with a revolutionary plug feature that virtually eliminates all s…
These Corning® 2 mL polypropylene microcentrifuge tubes feature screw caps that provide a tight secure seal. Attached cap with silicone O-ring Withstands a maximum RCF of 20,000xg Sterile
The miVac Duo Concentrator is suitable for use with a wide range of solvents, from volatile organic solvents through to water and some of the higher boiling point solvents. The Duo is a centrifugal vacuum concentrator compatable for use with variety of sample formats including tubes, microplates, vials and round bottom flasks. Making it an ideal "work-horse" concentrator for the busy lab. Combined with a SpeedTrap and JetRo…
FEATURES:• Versatile and durable tube developed for secure use in multiple laboratoryenvironments.• Ideal for boiling applications.• Can be centrifuged to over 20,000g.• Suitable for a wide range of temperatures from -196°C to +121°C(not for immersion in liquid nitrogen).• Constructed with super clear medical grade polypropylene.• Certified RNase, DNase & DNA free.• Sterile versions are certified free of pyrogens.• Available w…
FEATURES:• Versatile and durable tube developed for secure use in multiple laboratoryenvironments.• Ideal for boiling applications.• Can be centrifuged to over 20,000g.• Suitable for a wide range of temperatures from -196°C to +121°C(not for immersion in liquid nitrogen).• Constructed with super clear medical grade polypropylene.• Certified RNase, DNase & DNA free.• Sterile versions are certified free of pyrogens.• Available w…
FEATURES:• Versatile and durable tube developed for secure use in multiple laboratoryenvironments.• Ideal for boiling applications.• Can be centrifuged to over 20,000g.• Suitable for a wide range of temperatures from -196°C to +121°C(not for immersion in liquid nitrogen).• Constructed with super clear medical grade polypropylene.• Certified RNase, DNase & DNA free.• Sterile versions are certified free of pyrogens.• Available w…
FEATURES:• Versatile and durable tube developed for secure use in multiple laboratoryenvironments.• Ideal for boiling applications.• Numerous tube and cap options to form an ideal combination for specificapplications.• Can be centrifuged to over 20,000g.• Suitable for a wide range of temperatures from -196°C to +121°C(not for immersion in liquid nitrogen).• Constructed with super clear medical grade polypropylene.• Certified R…
FEATURES:• Versatile and durable tube developed for secure use in multiple laboratoryenvironments.• Ideal for boiling applications.• Numerous tube and cap options to form an ideal combination for specificapplications.• Can be centrifuged to over 20,000g.• Suitable for a wide range of temperatures from -196°C to +121°C(not for immersion in liquid nitrogen).• Constructed with super clear medical grade polypropylene.• Certified R…
