These 11 mL PYREX® VISTA™ culture tubes are supplied with deep-form 15-415 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
These 15 mL PYREX® VISTA™ culture tubes are supplied with deep-form 15-415 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
These 20 mL PYREX® VISTA™ culture tubes are supplied with deep-form 15-415 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
These 25 mL PYREX® VISTA™ culture tubes are supplied with deep-form 18-415 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
These 34 mL PYREX® VISTA™ culture tubes are supplied with deep-form 18-415 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
These 55 mL PYREX® VISTA™ culture tubes are supplied with deep-form 24-410 GPI threaded phenolic caps with rubber liners to facilitate handling and sealing after autoclaving. The blue enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For replacement phenolic caps, see No. 9999.
(This is the suggested replacement for 4990-125)These 125 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 125 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-1L)These 1L PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 1L Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-25)These 25 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 25 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-250)These 250 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 250 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-50)These 50 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 50 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
(This is the suggested replacement for 4990-500)These 500 mL PYREX® VISTA™ Erlenmeyer flasks have uniform wall thickness which provide balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The 500 mL Erlenmeyer flask is designed to ASTM E-1404 Type 1.
These PYREX® settlometers are used with oxidized sludge process for treatment of sewage and other wastes. 2000 mL heavy wall cylinder measures 51/8 high and is graduated in cc per liter, and in hundredths of a foot.
These approximately 3mm PYREX® beads are useful as boiling stones, mixing beads and as packing for distillation columns. Beads are packaged in 0.45kg. (1 lb.) bottles (each bottle is one pack), which have a packing volume of approximately 360cm³ or 22 cubic inches.
These approximately 4mm PYREX® beads are useful as boiling stones, mixing beads and as packing for distillation columns. Beads are packaged in 0.45kg. (1 lb.) bottles (each bottle is one pack), which have a packing volume of approximately 360cm³ or 22 cubic inches.
These approximately 5mm PYREX® beads are useful as boiling stones, mixing beads and as packing for distillation columns. Beads are packaged in 0.45kg. (1 lb.) bottles (each bottle is one pack), which have a packing volume of approximately 360cm³ or 22 cubic inches.
These approximately 6mm PYREX® beads are useful as boiling stones, mixing beads and as packing for distillation columns. Beads are packaged in 0.45kg. (1 lb.) bottles (each bottle is one pack), which have a packing volume of approximately 360cm³ or 22 cubic inches.
These high performance Rotaflo® in-line stopcocks can be adjusted from a 0 to 10mm bore opening and have 13mm O. D. sidearms. They are designed so that only chemically resistant polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nut…
These high performance Rotaflo® in-line stopcocks can be adjusted from a 0 to 3mm bore opening and have 8mm O. D. sidearms. They are designed so that only chemically resistant polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nuts.…
These high performance Rotaflo® in-line stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nuts…
These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 10mm bore opening and have 13mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or n…
These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 3mm bore opening and have 8mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nut…
These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nu…
These high performance Rotaflo® three-way stopcocks can be adjusted from a 0 to 3mm bore opening and have 8mm O. D. sidearms. They are designed so that only chemically resistant polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nut…
These high performance Rotaflo® three-way stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo® stopcock design permits fine flow adjustment. Lubrication is not required and assembly is fast because there are no O-rings, washers or nu…
