Automation Supplies / Accessories Products & Reviews

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

A 48 um soft non-permeable aluminum foil sealing film with 30 um layer of strong acrylic adhesive. FoilSealTM sealing foils remove cleanly from plate surfaces with no adhesive stringing, residue or contamination. Each sealing foil measures 78.3 x 129 mm and offers sufficient sealing area for all plate types (e.g. flat top and raised-rim). Chamfered corners result in no plate overhang for robotics applications. Features one end…

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

BRAND 96, 384, 1536-well polystyrene and polypropylene microtitration plates are excellent for cell and tissue culture, sample storage, immunological assays, and other applications. BrandTech Plates have 96, 384 and 1536 wells and are available with 330µL or 400µL well volumes. They are fully compatible with most standard plate readers and washers. Both sterile and non-sterile BRAND plates are available with rounded, V-shaped…

The 1000X is the largest of the ISCO X-series pump modules, with 1-liter nominal cylinder capacity. It delivers precise, positive, pulseless flow over a range of 0.001 mL/min to 400 mL/min, at pressures from atmospheric to 2,000 (psi) bar. Improved displacement resolution on this model gives finer control over motor movement. Coupled to our patented servo circuit, this means the 1000X can deliver excellent flow accuracy witho…

ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors.

ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors.

The compact M1 Class HPLC Pump consists of single-headed, positive displacement piston pumps that deliver high-performance and precision at an affordable price.

The economical MX Class consists of single-headed, positive displacement piston pumps with eccentric drive and shaped cam.

The reliable ReaXus LS Class consists of single-headed, positive displacement piston pumps incorporating advanced cam designs for very low pulsation.?

The versatile LD Class consists of dual-headed, positive displacement piston pumps, delivering unmatched performance for analytical, flash, and small-scale preparative chromatography applications.

The high pe?rformance CP Class consists of dual-headed, positive displacement piston pumps with constant pressure control, covering a wide range of flows, with pressures up to 25,000 psi.

The rugged PR Class consists of dual-headed positive displacement piston pumps that provide high accurate flows and excellent pressure capability for a variety of uses. ?

The HF Class are designed to meet the requirements of Preparative Liquid Chromatography (HPLC) and high pressure process/metering applications.

PeriXus® peristaltic pumps was developed with your lab or manufacturing plant in mind. With its compact and modular design, this space-saving pump uses peristaltic technology to help reduce the possibility of contamination, making it a great pump to use when handling volatile materials. The ability to quickly change hoses allows you to switch from pumping one material to another in minutes, maximizing application flexibilit…

The 260X was the first ISCO D-Series pump module, and our first syringe pump designed specifically for refilling under high pressure and pressure programming to handle supercritical fluids. With pressure control to 7,500 psi (517 bar) and a flow rate range from sub-microliter to 100 mL/min, the 260X offers exceptional versatility for almost any type of R&D or method development with supercritical CO2 and other fluids.

ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors.

The 500X is ideal for a wide range of chemical feed applications requiring flow rates up to 200 mL/min at pressures up to 3,750 psi. With its 500 mL cylinder capacity, this pump can deliver a precise 500 mL/min for over 8 hours on a single fill. For non-stop continuous flow, see dual pump systems with a choice of valve packages.

The 500xv can pump higher viscosity material by reducing the restriction within the syringe pump, specially designed with 3/8” ports at a 45-degree angle. Ball valves are used for automating refill and continuous flow, which clear easily.??