Products & Reviews

600 mL heavy duty beaker with spout is specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, these beakers have a double graduated metric scale to indicate their approximate content and an extra large marking spot. For PYREX® beaker covers, see Catalog No. 9985 or No. 9990. Reference: ASTM E-960.

These 250 mL PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy wall, the actual capacity is approximately 85% of the capacity listed.

These 500 mL PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy wall, the actual capacity is approximately 85% of the capacity listed.

These widely used 3 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer 19/38 Standard Taper joint at the top and an inner 19/38 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

These widely used 5 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer 24/40 Standard Taper joint at the top and an inner 24/40 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

These widely used 6 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer 24/40 Standard Taper joint at the top and an inner 24/40 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

These widely used 8 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer 24/40 Standard Taper joint at the top and an inner 24/40 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

These widely used 10 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer 29/42 Standard Taper joint at the top and an inner 29/42 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.

These 200mL PYREX® graduated cylinders are calibrated "to contain" (TC) in percent. 200mL is equal to 100% in 1% divisions. The scale is in durable white enamel. This cylinder may be used to measure the distillate in ASTM method D-86 "Distillation of Gas Oil and Similar Distillate Oil." Furnished with bumper guard. For replacement bumper guards, see No. 3066.

These specially blown, sturdy, approximately 12.3L PYREX® round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. -Warning: do not use with heat, pressure or vacuum applications.

These specially blown, sturdy, approximately 22.7L PYREX® round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. Warning: do not use with heat, pressure or vacuum applications.

These specially blown, sturdy, approximately 49.2L PYREX® round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. -Warning: do not use with heat, pressure or vacuum applications.

Sterile product arrives assembled, with cap fastened to tube Graduated at 1.0 mL intervals Large frosted writing area Secure fit between tube and cap to give leak proof seal Human DNA free RNase-/DNase-free Nonpyrogenic Sterile Material is virgin polypropylene Currently experiencing high demand for this item. Posted availability date may not be current. Contact Customer Support for up-to-date availability.

Our laboratory test chambers were designed for this purpose in particular and allow reproducible temperature and climatic tests directly at the workplace. A high temperature range from -70°C to +180°C as well as high-quality processing and construction are crucial for reliable measurement results – of course, all in compliance with test standards such as DIN, ISO, MIL, IEC, DEF and ASTM.

Ribbed design provides twice the surface area with the same exterior dimensions. Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in product traceability Sterilized by gamma radiatio…

Ribbed design provides twice the surface area with the same exterior dimensions. Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in product traceability Sterilized by gamma radiatio…

This microplate has half the growth area of a standard 96 well plate Flat bottoms with 190 µL total volume White walled plates enhance luminescent signals and have low background luminescence and fluorescence Opaque walls to prevent well-to-well crosstalk Nonreversable lids with condensation rings to reduce contamination Sterilized by gamma radiation and certified nonpyrogenic Bulk packed 20 per bag

Ribbed design provides twice the surface area with the same exterior dimensions. Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in product traceability Sterilized by gamma radiatio…

INTEGRA reagent reservoirs consist of disposable inserts that fit into reusable bases with clearly visible volume markings. This cost- and space saving design has now been combined with the innovative SureFlo™ anti-sealing array. This unique technology enables pipette tips to sit on the bottom without sealing or creating a vacuum. Along with the hydrophilic surface treatment that prevents liquid from pooling, these reservoirs…

Application The MagNA Pure LC Cooling Block, A-Ring holds one or two A-Rings with bar codes. Application of the corresponding Post Elution Module of the MagNA Pure LC Software results in automatic filling of the A-Rings with purified nucleic acids and compatible PCR reagents, which are also positioned on the Cooling Block. The A-Rings are then ready to be transferred to an instrument platform for testing. The stage of th…

The UPSTATE colorimetric STAR (Signal Transduction Assay Reaction) ELISA kit is a solid phase sandwich enzyme linked immunosorbent assay that provides a fast, sensitive method to detect specific levels of signaling targets in whole cell extracts. The Met plate is coated with a specific mouse monoclonal anti-Met capture antibody on the microwells of the 96-well clear plate. Sample lysate or the standard included in the kit are…

Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescent and enabling readings down to 340nm Designed to reduce well-to-well crosstalk during fluorescent assays Can be used for both top and bottom reading instruments Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable primarily for the i…

Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescent and enabling readings down to 340nm Designed to reduce well-to-well crosstalk during luminescent assays Can be used for both top and bottom reading instruments Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable primarily for the i…

This microplate has half the growth area of a standard 96 well plate Flat bottoms with 190 µL total volume White walled plates enhance luminescent signals and have low background luminescence and fluorescence Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescence and enabling readings down to 340nm Opaque walls to prevent well-to-well crosstalk Optically clear flat well…

This microplate has half the growth area of a standard 96 well plate Flat bottoms with 190 µL total volume White walled plates enhance luminescent signals and have low background luminescence and fluorescence Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescence and enabling readings down to 340nm Opaque walls to prevent well-to-well crosstalk Optically clear flat well…